# Component catalog Generated by `python scripts/make_catalog.py` on 2026-11-16 from `quantcore_circuits.layouts.catalog.catalog()`. Do not edit by hand. **143 components** usable as a `design.json` `cell` (57 Quantcore, 45 KQCircuits, 41 Quantum Metal), 109 with a LOM model; plus 25 whole chips (reference cells) and 6 Metal routes (not cells: use a qcc route). * **ref** goes into `design.json` `cell` / `Designer.add(name, ref, ...)`; `metal:` takes the Metal options as params. * **ports**: the ports of a default instance, read from the cell built through the design-plan path (`qcc components ` prints positions, directions and CPW widths). A port marked † has no direction (cannot be snapped to; see the note). * **LOM**: a lumped model is registered (`quantcore_circuits.lom.fragment.lom_model(ref)`). * **origin**: the legacy QWri file a Quantcore cell reproduces (golden XOR tests in `tests/test_golden_legacy*.py`; full map in `MIGRATION.md`). ## Summary | category | Quantcore | KQC | Metal | with LOM | |---|---|---|---|---| | qubit | 5 | 5 | 11 | 21 / 21 | | junction | 8 | 5 | 5 | 18 / 18 | | coupler | 3 | 1 | 5 | 9 / 9 | | capacitor | 4 | 5 | 3 | 12 / 12 | | resonator | 6 | 3 | 3 | 12 / 12 | | launcher | 3 | 2 | 3 | 8 / 8 | | termination | 3 | 0 | 2 | 5 / 5 | | waveguide | 6 | 7 | 1 | 14 / 14 | | airbridge | 0 | 3 | 1 | 4 / 4 | | marker | 8 | 3 | 0 | 0 / 11 | | test_structure | 4 | 6 | 0 | 1 / 10 | | flip_chip | 0 | 3 | 0 | 0 / 3 | | shape | 5 | 0 | 7 | 1 / 12 | | other | 2 | 2 | 0 | 4 / 4 | ## qubit | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | Flipmon | `Flipmon` | quantcore | coupler, squid_a, squid_b | yes | QPDK flipmon_with_bbox (MIT). Face 2b1 (top-chip disc, its etch, the bump) is on KQC face-2b1 layers, which the PDK maps to 800/0+ (flip-chip). Port 'coupler' is on the M1 etch edge, 13 µm beyond QPDK's plate port o1 at defaults. | | Gatemon | `Gatemon` | quantcore | gate, readout, squid_a, squid_b | yes | QPDK gatemon (MIT): M1 plus the CNT contacts, nanotube, hBN, Al patches and top gate on the proposed layers 600-604/0 (qpdk_cells.GATEMON_LAYERS; no fab numbers yet, draw_process_layers=False for M1 only). Port 'readout' is the island edge (a = island width, b = pocket_gap_top), not a CPW end: snap it to GatemonCoupler.qubit. | | TransmonTaperedInsets | `TransmonTaperedInsets` | quantcore | bottom_left_pin, bottom_pocket_pin, bottom_right_pin, squid_a, squid_b, top_left_pin, top_pocket_pin, top_right_pin | yes | SQDMetal TransmonTaperedInsets (Apache-2.0). The corner and pocket pins keep SQDMetal's normals (top_*_pin +x, bottom_*_pin +y, top_pocket_pin +x, bottom_pocket_pin -x): placement marks in or at the pocket, not CPW ends. Connection-pad ports are CPW ends. | | TwoPadTransmon | `TwoPadTransmon` | quantcore | left, right, squid_a, squid_b | yes | legacy `Transmon.lym`; Floating two-pad transmon (legacy ``Transmon``); ports ``left`` / ``right`` at the lead ends. | | Xmon | `Xmon` | quantcore | claw_n | yes | legacy `xmon_cross.lym`, `xmon_handle.lym`; claw tails ('claw_n/w/e') start the readout CPW: their clearance is claw_tail_gap (-1 = the element b, the chip CPW gap; claw_ground: claw_ground_gap) and the port declares exactly that (a = claw_tail_width); the claw body keeps the claw_spacing clearance. junction_type 'Quantcore Junction' / 'Quantcore Squid' = the PDK trilayer junctions; 3/0 keep-out = the legacy cross grown by 2*claw_base + 10 + claw_finger_width. | | CircularTransmonSingleIsland | `CircularTransmonSingleIsland` | kqc | coupler_1, coupler_2, coupler_3, drive | yes | The PCell declaration for a single island circular transmon. | | ConcentricTransmon | `ConcentricTransmon` | kqc | coupler_1, coupler_2, coupler_3, drive | yes | The PCell declaration for a concentric transmon. | | DoublePads | `DoublePads` | kqc | cplr, drive | yes | A two-island qubit, consisting of two rounded rectangles shunted by a junction, with one capacitive coupler. | | DoublePadsSplines | `DoublePadsSplines` | kqc | cplr, drive | yes | A two-island qubit, consisting of two spline-constructed islands shunted by a junction, | | Swissmon | `Swissmon` | kqc | cplr0, cplr1, cplr2, drive†, flux | yes | port 'drive' has no direction with default parameters (KQC puts no port_drive_corner). Coupler ports 'cplr0..2' have a = port_width[i]; the qubit's own gap around them is wider than b. | | StarQubit | `metal:StarQubit` | metal | pin_cpl1, pin_cpl2, pin_cpl3, pin_cpl4, pin_rdout, squid_a, squid_b | yes | A single configurable circle with multiple pads. | | TransmonConcentric | `metal:TransmonConcentric` | metal | pin1, pin2, pin3, squid_a, squid_b | yes | The base `TrasmonConcentric` class . | | TransmonConcentricType2 | `metal:TransmonConcentricType2` | metal | pin1, pin2, pin3, squid_a, squid_b | yes | draws metal only, no pocket (Metal leaves its pocket commented out): alone it is empty in the negative mask, as in Metal's own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal's defaults are mm-scale. | | TransmonCross | `metal:TransmonCross` | metal | squid_a, squid_b | yes | The base `TransmonCross` class. | | TransmonCrossFL | `metal:TransmonCrossFL` | metal | flux_line, squid_a, squid_b | yes | The base `TransmonCrossFL` class. | | TransmonInterdigitated | `metal:TransmonInterdigitated` | metal | bus1, bus2, readout, squid_a, squid_b | yes | The base "TransmonInterdigitated" inherits the "QComponent" class. | | TransmonPocket | `metal:TransmonPocket` | metal | squid_a, squid_b | yes | The base `TransmonPocket` class. | | TransmonPocket6 | `metal:TransmonPocket6` | metal | squid_a, squid_b | yes | Transmon pocket with 6 connection pads. | | TransmonPocketCL | `metal:TransmonPocketCL` | metal | Charge_Line, squid_a, squid_b | yes | The base `TransmonPocketCL` class. | | TransmonPocketTeeth | `metal:TransmonPocketTeeth` | metal | squid_a, squid_b | yes | Transmon pocket with 'Teeth' connection pads. | | TransmonStar | `metal:TransmonStar` | metal | squid_a, squid_b | yes | The base `TransmonStar` class. | ## junction | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | QuantcoreJunction | `QuantcoreJunction` | quantcore | common | yes | The Quantcore PDK junction (``junction_type: "Quantcore Junction"`` in any KQC / Quantcore qubit): a | | QuantcoreSquid | `QuantcoreSquid` | quantcore | common | yes | The Quantcore PDK SQUID (``junction_type: "Quantcore Squid"``): a symmetric TrilayerSquid whose **whole SQUID** | | SquidV0 | `SquidV0` | quantcore | common | yes | legacy `junction_creator_sq.py`, `junction_pad.py`; Pre-HSQ SQUID (legacy ``junction_creator_sq.create_junction_squid``; ``junction_pad.py`` with | | TrilayerJunction | `TrilayerJunction` | quantcore | common | yes | legacy `xjc_junction_TL_mod.py`; Single Nb trilayer cross junction (legacy ``xjc_junction_TL_mod.create_junction``). | | TrilayerJunctionCompact | `TrilayerJunctionCompact` | quantcore | common | yes | legacy `chip_11m_TestJJ16x_pads.py`; Compact single trilayer junction for dense junction test arrays (legacy ``chip_11m_TestJJ16x_pads.py`` | | TrilayerJunctionHSQ | `TrilayerJunctionHSQ` | quantcore | common | yes | legacy `junction_creator_HSQ.py`, `xjc_junction_TL_mod_v0.1.py`; Single trilayer junction, first HSQ generation (legacy ``junction_creator_HSQ.create_junction``). | | TrilayerSquid | `TrilayerSquid` | quantcore | common | yes | legacy `xjc_squid_TL_mod.py`; Two trilayer junctions forming a SQUID (legacy ``xjc_squid_TL_mod.create_squid``). | | TrilayerSquidHSQ | `TrilayerSquidHSQ` | quantcore | common | yes | legacy `squid_creator_HSQ.py`, `xjc_squid_TL_mod_v0.1.py`; Two trilayer junctions forming a SQUID, first HSQ generation (legacy ``squid_creator_HSQ.create_squid``). | | Manhattan | `Manhattan` | kqc | common | yes | The PCell declaration for a Manhattan style SQUID. | | ManhattanSingleJunction | `ManhattanSingleJunction` | kqc | common | yes | The PCell declaration for a Manhattan style single junction. | | NoSquid | `NoSquid` | kqc | common | yes | The PCell declaration for a No SQUID junction. | | Sim | `Sim` | kqc | common, squid_a, squid_b | yes | The PCell declaration for a simulation type SQUID. | | SuperInductor | `SuperInductor` | kqc | common | yes | The PCell declaration for a Manhattan style single junction. | | BridgeFreeJunction | `metal:BridgeFreeJunction` | metal | (none) | yes | user_bridgefreejj.png | | jj_dolan | `metal:jj_dolan` | metal | (none) | yes | Dolan-bridge Josephson junction. | | jj_manhattan | `metal:jj_manhattan` | metal | (none) | yes | Manhattan-style Josephson junction. | | SNAIL | `metal:SNAIL` | metal | a, b, squid_a, squid_b | yes | A SNAIL (Superconducting Nonlinear Asymmetric Inductive eLement). | | SQUID_LOOP | `metal:SQUID_LOOP` | metal | (none) | yes | The base "SQUID_LOOP" inherits the "QComponent" class. | ## coupler | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | GatemonCoupler | `GatemonCoupler` | quantcore | o1, o2, qubit | yes | QPDK gatemon_coupler (MIT). Port 'qubit' is a capacitive reference plane (a = island_width, b = pocket_gap_top), not a CPW end: snap a Gatemon 'readout' to it. | | HyperbolicVertexCoupler | `HyperbolicVertexCoupler` | quantcore | o1, o2, o3 | yes | ``q``-pin capacitive disk coupler at a hyperbolic-lattice vertex (QPDK ``hyperbolic_vertex_coupler``). | | PadCoupler | `PadCoupler` | quantcore | left, right | yes | legacy `coupler.lym`; Series gap capacitor of two facing pads (legacy ``Coupler``); ports ``left`` / ``right``. | | CapacitiveXCoupler | `CapacitiveXCoupler` | kqc | p11, p21, p31, p41 | yes | KQC draws no port refpoints, only its arm ends p11, p21, p31, p41 (KQC's own simulation ports): qcc gives them as CPW ports (element a/b) facing out along each arm (registry.KQC_EXTRA_PORTS, '+': S, E, N, W; 'x': the corners). LOM: each arm couples through its finger capacitor to the floating centre cross. | | CapNInterdigitalTee | `metal:CapNInterdigitalTee` | metal | prime_end, prime_start, second_end | yes | Generates a three pin (+) structure comprised of a primary two pin CPW | | CoupledLineTee | `metal:CoupledLineTee` | metal | prime_end, prime_start, second_end | yes | Generates a three pin (+) structure comprised of a primary two pin CPW | | LineTee | `metal:LineTee` | metal | prime_end, prime_start, second_end | yes | Generates a three pin (+) structure comprised of a primary two pin CPW | | TunableCoupler01 | `metal:TunableCoupler01` | metal | Control, Flux, squid_a, squid_b | yes | One of the tunable couplers Based off the implementation in | | TunableCoupler02 | `metal:TunableCoupler02` | metal | fbl, pin1, pin2, squid_a, squid_b | yes | draws metal only, no pocket (Metal computes its pocket but never adds it): alone it is empty in the negative mask, as in Metal's own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal's defaults are mm-scale. | ## capacitor | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | CpweFingerCapacitor | `CpweFingerCapacitor` | quantcore | a, b | yes | legacy `cpwe.py`; Interdigital capacitor interrupting the centre line (legacy ``cpwe.finger_cap``); ports ``a`` (−x), ``b``. | | CpweFingerLine | `CpweFingerLine` | quantcore | a, b | yes | legacy `cpwe.py`; CPW with interdigital fingers between centre line and ground on both sides (legacy ``cpwe.finger_line``); | | CpweGapCapacitor | `CpweGapCapacitor` | quantcore | a, b | yes | legacy `cpwe.py`; Gap in the centre line (legacy ``cpwe.gap_cap``); ports ``a`` (−x), ``b`` (+x). | | SmoothCapacitorSemicircle | `SmoothCapacitorSemicircle` | quantcore | a, target | yes | SQDMetal Smooth_Capacitor_Semicircle (Apache-2.0). Port 'target' is a placement reference: snap it to the qubit pin (SQDMetal start_pin); routes start at 'a' (set lead_length to reach the pocket edge). | | CircularCapacitor | `CircularCapacitor` | kqc | a, b | yes | The PCell declaration for a circular capacitor. | | FingerCapacitorSquare | `FingerCapacitorSquare` | kqc | a, b | yes | The PCell declaration for a square finger capacitor. | | FingerCapacitorTaper | `FingerCapacitorTaper` | kqc | a, b | yes | The PCell declaration for a tapered finger capacitor. | | SmoothCapacitor | `SmoothCapacitor` | kqc | a, b | yes | The PCell declaration for a smooth finger capacitor. | | SpiralCapacitor | `SpiralCapacitor` | kqc | a, b | yes | The PCell declaration for a spiral capacitor. | | Cap3Interdigital | `metal:Cap3Interdigital` | metal | a, b | yes | Create a three finger planar capacitor with a ground pocket cuttout. | | CapFingerInFrame | `metal:CapFingerInFrame` | metal | finger, frame | yes | Two-pin gap capacitor with one electrode framing the other. | | CapNInterdigital | `metal:CapNInterdigital` | metal | north_end, south_end | yes | Generates a two pin (+) structure comprised of a north CPW transmission | ## resonator | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | CoupledResonator | `CoupledResonator` | quantcore | end | yes | legacy `CPW_Coupled_Resonator.lym`; 'end' is an open end: with ground=True the gap cap lies beyond the port, so anything joined there galvanically is cut off (ground=False leaves the end for a connection). | | CpweQuarterWaveResonator | `CpweQuarterWaveResonator` | quantcore | (none) | yes | legacy `Template_1.lym`, `coupled quarter waves cpwe v1.lym`, `cpwe.py`; λ/4 resonator capacitively coupled through an open-ended arm parallel to the feedline (legacy | | CpwResonator | `CpwResonator` | quantcore | end, start | yes | legacy `CPWResonator.lym`; Meandered CPW resonator grounded at both ends (legacy ``CPW Resonator``); ports ``start`` and ``end``. | | LumpedJpa | `LumpedJpa` | quantcore | signal, squid_a, squid_b | yes | Lumped JPA: a trilayer junction or SQUID to ground, shunted by an interdigital capacitor (twpa-sim ``jpa`` / | | QubitResonator | `QubitResonator` | quantcore | end | yes | legacy `Qubit_Resonator.lym`; 'end' (tail) is an open end: with ground=True the gap cap lies beyond the port, so anything joined there galvanically is cut off. | | SpiralLine | `SpiralLine` | quantcore | a, b | yes | legacy draw.spiral (Archimedean / Fermat / double Fermat by angle; the legacy double-Fermat typo y_bls/y1s fixed). Ports 'a'/'b' at the path ends face along the tangent (not Manhattan); metal by default: place it on a pocket (pocket_margin, or metal:Rectangle subtract). LOM: an open-ended line of the drawn length (rough, no kinetic inductance). | | HangerResonator | `HangerResonator` | kqc | a, b, resonator_a, resonator_b | yes | Hanger Resonator | | QuarterWaveCpwResonator | `QuarterWaveCpwResonator` | kqc | a, b, resonator_b | yes | CPW Resonator | | SpiralResonatorPolygon | `SpiralResonatorPolygon` | kqc | a, b | yes | The PCell declaration for a polygon shaped spiral resonator. | | ReadoutResFC | `metal:ReadoutResFC` | metal | readout | yes | ReadoutResFC.png | | ResonatorCoilRect | `metal:ResonatorCoilRect` | metal | spiralPin | yes | A rectangle spiral resonator based on length input. The X dimension is | | ResonatorLumped | `metal:ResonatorLumped` | metal | pin_east, pin_n, pin_ne, pin_nw, pin_s, pin_se, pin_sw, pin_west | yes | draws metal only, no pocket (perimeter and trace are both metal): alone it is empty in the negative mask, as in Metal's own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal's defaults are mm-scale. | ## launcher | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | BondPad | `BondPad` | quantcore | a | yes | legacy `connector_pad_v2.lym`; Wire-bond pad tapering to a CPW (``a``/``b``); port ``a`` at the taper tip. | | ConnectorPad | `ConnectorPad` | quantcore | a | yes | legacy `connector_pad.lym`; Wire-bond pad tapering to a CPW (legacy "Connector Pad", v1); port ``a`` at the taper tip. | | CpweBondPad | `CpweBondPad` | quantcore | a | yes | legacy `Template_1.lym`, `bondpad_cpwe.lym`, `coupled quarter waves cpwe v1.lym`, `cpwe.py`; Bond pad: open end ``tl``, wide line ``bl`` (``pad_width``/``pad_gap``), taper ``btl`` to the CPW ``a``/``b`` | | Launcher | `Launcher` | kqc | port | yes | The PCell declaration for a launcher for connecting wirebonds. | | LauncherDC | `LauncherDC` | kqc | port† | yes | DC pad: its one port 'port' sits at the pad centre with no direction (KQC adds no corner; the square pad is symmetric). Place it with at=/rot=; a route may start or end there (it leaves toward its next node); it cannot be snapped to. For an RF launcher with a directed port use Launcher or BondPad. | | LaunchpadWirebond | `metal:LaunchpadWirebond` | metal | tie | yes | Launch pad to feed/read signals to/from the chip. | | LaunchpadWirebondCoupled | `metal:LaunchpadWirebondCoupled` | metal | tie | yes | Launch pad to feed/read signals to/from the chip. | | LaunchpadWirebondDriven | `metal:LaunchpadWirebondDriven` | metal | in, tie | yes | Launch pad to feed/read signals to/from the chip. | ## termination | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | CpweOpenEnd | `CpweOpenEnd` | quantcore | a | yes | legacy `cpwe.py`; Open CPW termination (legacy ``cpwe.term_open``): the gap box of ``length``; port ``a`` at the origin (−x). | | NeckTermination | `NeckTermination` | quantcore | o1 | yes | Shorted CPW end through a taper and a narrow neck in an etched window (QPDK ``neck_termination``). | | SquidTermination | `SquidTermination` | quantcore | a, pump, squid_a, squid_b | yes | CPW lead shorted to ground through a trilayer SQUID, with a shorted pump / flux line (QPDK ``squid_termination`` | | OpenToGround | `metal:OpenToGround` | metal | open | yes | A sample_shapes open to ground termination. Functions as a pin for auto drawing. | | ShortToGround | `metal:ShortToGround` | metal | short | yes | ShortToGround.png | ## waveguide | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | CoupledConnector | `CoupledConnector` | quantcore | end, start | yes | legacy `CoupledConnector.lym`, `CoupledConnector.py`; 'end' is an open end with ground=False (default): the gap box covers the port, so nothing can be joined galvanically; ground=True leaves the end for a connection. | | CpweMeanderLine | `CpweMeanderLine` | quantcore | a, b | yes | legacy `cpwe.py`; Meandered CPW (legacy ``cpwe.meander_line``; with ``lead`` > 0 it is legacy ``cpwe.quarter_wave``: lead, | | CpweTaper | `CpweTaper` | quantcore | a, b | yes | legacy `cpwe.py`; Taper from ``a``/``b`` to ``a_end``/``b_end`` (legacy ``cpwe.tapper``: linear or exponential profiles). | | CpwSegment | `CpwSegment` | quantcore | a, b | yes | legacy `CPW.lym`; Straight CPW segment centred at the origin (legacy "Coplanar Waveguide"); ports ``a`` (−x) and ``b`` (+x). | | JtwpaChain | `JtwpaChain` | quantcore | a, b | yes | Series chain of ``cells`` trilayer junctions along +x (4WM JTWPA; twpa-sim ``jtwpa4wm``; QPDK resonantly | | KiTwpaSerpentine | `KiTwpaSerpentine` | quantcore | a, b | yes | Kinetic-inductance TWPA serpentine (twpa-sim ``KITLayout`` / ``kit.primitives``, the NY CREATES research | | Meander | `Meander` | kqc | a, b | yes | The PCell declaration for a meandering waveguide. | | WaveguideComposite | `WaveguideComposite` | kqc | a, b | yes | A composite waveguide made of waveguides and other elements. | | WaveguideCoplanar | `WaveguideCoplanar` | kqc | a, b | yes | The PCell declaration for an arbitrary coplanar waveguide. | | WaveguideCoplanarCurved | `WaveguideCoplanarCurved` | kqc | a, b | yes | origin at the arc centre: port 'a' at (r, 0), 'b' at angle alpha, both facing out along the tangent (registry.KQC_EXTRA_PORTS; KQC draws no ports). LOM: a CPW line of r·\|alpha\|. | | WaveguideCoplanarSplitter | `WaveguideCoplanarSplitter` | kqc | a, b, c | yes | The PCell declaration of a multiway waveguide splitter. The number of ports is defined by the length of the | | WaveguideCoplanarStraight | `WaveguideCoplanarStraight` | kqc | (none) | yes | The PCell declaration of a straight segment of a coplanar waveguide. | | WaveguideCoplanarTaper | `WaveguideCoplanarTaper` | kqc | a, b | yes | The PCell declaration of a taper segment of a coplanar waveguide. | | PolylineCPW | `metal:PolylineCPW` | metal | end, start | yes | A coplanar waveguide drawn along an explicit polyline. | ## airbridge | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | AirbridgeConnection | `AirbridgeConnection` | kqc | a, b | yes | The PCell declaration of an Airbridge with tapered waveguides in both ends. | | AirbridgeMultiFace | `AirbridgeMultiFace` | kqc | a, b | yes | PCell declaration for a multi-face equivalent for an airbridge. | | AirbridgeRectangular | `AirbridgeRectangular` | kqc | a, b | yes | PCell declaration for a rectangular airbridge. | | Airbridge | `metal:Airbridge` | metal | a, b | yes | A single airbridge: two base-metal landing pads joined by an elevated | ## marker | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | AlignmentMarkers | `AlignmentMarkers` | quantcore | (none) | no | legacy `draw.py`; E-beam alignment squares at the four chip corners (legacy ``draw.marker_align``); origin = chip lower-left. | | BoundaryBox | `BoundaryBox` | quantcore | (none) | no | legacy `boundaryBox.lym`; Chip boundary square with corner crosses (legacy ``BoundBox``, layer 9/0 → qcc ``chip_boundary``). | | CornerMarker | `CornerMarker` | quantcore | (none) | no | legacy `Marker.lym`; L-shaped chip-corner alignment marker (legacy ``Marker``); ``hsq=True`` draws the HSQ variant. | | CrossMarker | `CrossMarker` | quantcore | (none) | no | legacy `draw.py`; Small alignment cross (legacy ``draw.marker``, used beside the ``cpwe`` bond pads). | | DicingMarker | `DicingMarker` | quantcore | (none) | no | legacy `draw.py`; Dicing cross (legacy ``draw.marker_dicing``). | | EbeamMarker | `EbeamMarker` | quantcore | (none) | no | legacy `die_creator.py`; E-beam marker: four metal squares in an etched window (legacy ``die_creator``). | | GlobalMarker | `GlobalMarker` | quantcore | (none) | no | legacy `draw.py`; Global alignment marker: six squares in two columns (legacy ``draw.global_marker``). | | WaferMap75 | `WaferMap75` | quantcore | (none) | no | legacy `75x75_diewafer.lym`; 4-inch wafer map of 7.5 mm dies with die borders, labels and the wafer circle (legacy Cong 75x75 die wafer). | | ChipFrame | `ChipFrame` | kqc | (none) | no | The PCell declaration for a chip frame. | | MarkerStandard | `MarkerStandard` | kqc | (none) | no | The PCell declaration for the Standard Marker. | | MaskMarkerFc | `MaskMarkerFc` | kqc | (none) | no | The PCell declaration for a MaskMarkerFc. | ## test_structure | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | JunctionGroundPad | `JunctionGroundPad` | quantcore | (none) | no | legacy `testPad.py`; Rounded probe pad joined to ground by a bridge carrying a trilayer junction (legacy ``testPad.py``). | | JunctionTestPads | `JunctionTestPads` | quantcore | (none) | no | legacy `testPad_AVAQUS.py`, `testPad_Nb_TL.py`, `testPad_Nb_TL_HSQ.py`, `xtp_testpads_TL_small.py`; the legacy QWri test-pad block (Quantcore). KQC's test-structure factory of the same name is kqcircuits.test_structures.junction_test_pads.junction_test_pads.JunctionTestPads (dotted path). | | ProbePadPair | `ProbePadPair` | quantcore | (none) | no | chip_11m's commented-out probe pads (DC test structure, no ports, no circuit model): upper pad in 1/0, lower pad in the 3/0 second metal (qcc_keepout); junction_type 'Trilayer Junction Compact' puts the JX_500 junction in the cut-out. | | TaperedPad | `TaperedPad` | quantcore | finger | yes | legacy `pad.lym`; Probe pad tapering to a junction finger (legacy "Pad"); port ``finger`` at the taper tip. | | AirbridgeDC | `AirbridgeDC` | kqc | (none) | no | The PCell declaration for an airbridge test structure for four-point DC measurements. | | CrossTest | `CrossTest` | kqc | (none) | no | PCell declaration for optical lithography test alignment cross markers. | | JunctionTestPadsSimple | `JunctionTestPadsSimple` | kqc | (none) | no | Junction test structures. | | StripesTest | `StripesTest` | kqc | (none) | no | PCell declaration for optical lithography test stripes. | | StripesTestIncreasingWidth | `StripesTestIncreasingWidth` | kqc | (none) | no | PCell declaration for optical lithography test stripes. | | TsvTestPattern | `TsvTestPattern` | kqc | (none) | no | PCell declaration for TSV test structures which resembles a TSV fencing for a CPW transmission line. | ## flip_chip | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | FlipChipConnectorDc | `FlipChipConnectorDc` | kqc | (none) | no | PCell declaration for an inter-chip dc connector. | | FlipChipConnectorRf | `FlipChipConnectorRf` | kqc | (none) | no | PCell declaration for an inter-chip rf connector. | | TsvStandard | `TsvStandard` | kqc | (none) | no | Connector between faces of two sides of a substrate. | ## shape | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | ArcPath | `ArcPath` | quantcore | (none) | no | legacy `Arc.lym`; Circular arc path starting at the origin (legacy "Arc"): ``length`` ≥ ``arc_length`` → half circle of that | | JJFingerBent | `JJFingerBent` | quantcore | (none) | no | legacy `JJ_finger_bottom.lym`; Bent junction finger with its holder (legacy "JJ_finger Bottom"), on ``SIS_junction_2`` (4/0). | | JJFingerStraight | `JJFingerStraight` | quantcore | (none) | no | legacy `JJ_finger_top.lym`; Straight junction finger (legacy "JJ_finger Top"), on ``SIS_junction`` (2/0). | | SpiralPath | `SpiralPath` | quantcore | (none) | no | legacy `spiral.lym`; Archimedean spiral path from ``inner_r`` to ``outer_r`` (legacy "Spiral"). | | TextLabel | `TextLabel` | quantcore | (none) | no | Text etched into the ground (legacy chips 01–06: ``TextGenerator.default_generator().text(text, dbu, mag, | | CircleCaterpillar | `metal:CircleCaterpillar` | metal | (none) | no | A single configurable circle. | | CircleRaster | `metal:CircleRaster` | metal | (none) | no | A single configurable circle. | | NGon | `metal:NGon` | metal | (none) | no | A n-gon polygon. Eg. n = 3 : triangle, n = infinity : circle | | NSquareSpiral | `metal:NSquareSpiral` | metal | spiralPin | yes | draws metal only, no pocket (a metal spiral path; LOM on a pocket: an open line of the drawn length (rough)): alone it is empty in the negative mask, as in Metal's own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal's defaults are mm-scale. | | Rectangle | `metal:Rectangle` | metal | (none) | no | A single configurable square. | | RectangleHollow | `metal:RectangleHollow` | metal | (none) | no | A single configurable square. | | SmileyFace | `metal:SmileyFace` | metal | (none) | no | TEST COMPONENT It is for fun only. Can view a smiley face. Can make it | ## other | name | ref | source | ports | LOM | origin / notes | |---|---|---|---|---|---| | FluxHoleArray | `FluxHoleArray` | quantcore | (none) | yes | legacy `flux_holes.py`; Array of square flux-trapping holes in the ground plane (legacy chips' ``flux_holes``). | | FluxHoles | `FluxHoles` | quantcore | (none) | yes | Square flux-trapping holes at explicit centres (legacy notebook 14 ``FluxHoles`` QComponent, ``size`` 5 µm). | | FluxlineStandard | `FluxlineStandard` | kqc | flux | yes | Fluxline variant "standard". | | FluxlineStraight | `FluxlineStraight` | kqc | flux | yes | Fluxline variant "straight vertical". | ## Whole chips (reference cells, category `chip`) | name | ref | source | description | |---|---|---|---| | DesignChip | `DesignChip` | quantcore | Chip generated from a ``design.json`` build plan. | | AirbridgeCrossings | `AirbridgeCrossings` | kqc | The PCell declaration for an AirbridgeCrossings chip. | | AirbridgeDcTest | `AirbridgeDcTest` | kqc | Chip full of airbridge 4-point dc tests. | | Chip | `Chip` | kqc | Base PCell declaration for chips. | | CrossingTwoface | `CrossingTwoface` | kqc | The PCell declaration for a CrossingTwoFace chip. | | DaisyWoven | `DaisyWoven` | kqc | Base PCell declaration for a Daisy Woven chip. | | DcTest | `DcTest` | kqc | Chip with launchers for DC sample holder. | | Demo | `Demo` | kqc | Demonstration chip with a four qubits, four readout resonators, two probe lines, charge- and fluxlines. | | DemoTwoface | `DemoTwoface` | kqc | Demonstration chip for 3D-integration (multi-face) features. | | Empty | `Empty` | kqc | Chip with almost all ground metal removed, used for EBL tests. | | JunctionTest | `JunctionTest` | kqc | The PCell declaration for a JunctionTest chip. | | JunctionTest2 | `JunctionTest2` | kqc | The PCell declaration for a JunctionTest2 chip. | | Launchers | `Launchers` | kqc | The PCell declaration for a chip with predefined launchers. | | LithographyTest | `LithographyTest` | kqc | Optical lithography test chip. | | LithographyTestTwoface | `LithographyTestTwoface` | kqc | Optical lithography test chip in a flip chip architecture. | | MunchQubits | `MunchQubits` | kqc | Demonstration chip with two circular single island qubits, one floating island qubit, three readout resonators, | | QualityFactor | `QualityFactor` | kqc | The PCell declaration for a QualityFactor chip. | | QualityFactorTwoface | `QualityFactorTwoface` | kqc | The PCell declaration for a QualityFactorTwoFace chip. | | SampleHolderTest | `SampleHolderTest` | kqc | The PCell declaration for a SampleHolderTest chip. | | Shaping | `Shaping` | kqc | The PCell declaration for a Shaping chip. | | Simple | `Simple` | kqc | The PCell declaration for a very simple chip. | | SingleXmons | `SingleXmons` | kqc | The PCell declaration for a SingleXmons chip. | | Stripes | `Stripes` | kqc | The PCell declaration for a Stripes chip. | | TsvTest | `TsvTest` | kqc | Through silicon via test chip. | | XMonsDirectCoupling | `XMonsDirectCoupling` | kqc | The PCell declaration for an XMonsDirectCoupling chip. | ## Metal routes (not cells) | name | use instead | |---|---| | RouteAnchors | Metal route, not a cell: use a qcc route type "cpw" with the anchors as "nodes" | | RouteFramed | Metal route, not a cell: use a qcc route type "cpw" with Manhattan "nodes" (the router adds the corners) | | RouteMeander | Metal route, not a cell: use a qcc route type "meander" with "length" (total_length in µm) | | RouteMixed | Metal route, not a cell: use a qcc route type "meander" with "length" and the anchors as "nodes" | | RoutePathfinder | Metal route, not a cell: use a qcc route type "cpw" (the qcc router finds a Manhattan path; add "nodes" to steer it) | | RouteStraight | Metal route, not a cell: use a qcc route type "cpw" between the two ports (no nodes) |