% generated by scripts/make_component_docs.py -- do not edit. Put hand-written notes in docs/components/notes/DoublePads.md (included below). # DoublePads A two-island qubit, consisting of two rounded rectangles shunted by a junction, with one capacitive coupler. **Source:** KQC (KQCircuits). **Category:** qubit. **Module:** `kqcircuits.qubits.double_pads`. See also the [catalog](../CATALOG.md). ## Pins ![Pins of DoublePads](../../images/components/DoublePads.png) Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm. | pin | x (µm) | y (µm) | direction (°) | a (µm) | b (µm) | purpose | |---|---|---|---|---|---|---| | `cplr` | 0 | 350 | 90 | 10 | 6 | coupler port (readout / bus); LOM node `cplr` | | `drive` | -450 | 0 | 180 | 10 | 6 | drive / charge line end; control line (drive) in the LOM | a, b: CPW centre width and gap where the pin declares them (`–` = not declared). Position and direction are in the cell's own frame (`at=(0, 0)`, `rot=0`). ## Parameters | name | default | unit | description | |---|---|---|---| | `a` | `10` | μm | Width of center conductor | | `b` | `6` | μm | Width of gap | | `r` | `100` | μm | Turn radius | | `mirror_squid` | `false` | – | Mirror SQUID by its Y axis | | `junction_type` | `"Manhattan"` | – | Junction Type | | `junction_width` | `0.02` | μm | Junction width for code generated element | | `ground_gap` | `[700, 700]` | – | Width, height of the ground gap (µm, µm) | | `ground_gap_r` | `50` | μm | Ground gap rounding radius | | `coupler_extent` | `[150, 20]` | – | Width, height of the coupler (µm, µm) | | `coupler_r` | `10` | μm | Coupler rounding radius | | `coupler_a` | `10` | μm | Width of the coupler waveguide center conductor | | `coupler_offset` | `20` | μm | Distance from first qubit island to coupler | | `squid_offset` | `0` | μm | Offset between SQUID center and qubit center | | `island1_extent` | `[500, 100]` | – | Width, height of the first qubit island (µm, µm) | | `island1_r` | `50` | μm | First qubit island rounding radius | | `island2_extent` | `[500, 100]` | – | Width, height of the second qubit island (µm, µm) | | `island2_r` | `50` | μm | Second qubit island rounding radius | | `island1_taper_width` | `10` | µm | First qubit island tapering width on the island side | | `island1_taper_junction_width` | `10` | µm | First qubit island tapering width on the junction side | | `island2_taper_width` | `10` | µm | Second qubit island tapering width on the island side | | `island2_taper_junction_width` | `10` | µm | Second qubit island tapering width on the junction side | | `island_island_gap` | `70` | µm | Island to island gap distance | | `with_squid` | `true` | – | Boolean whether to include the squid | | `finger_overshoot` | `1.0` | μm | Length of fingers after the junction. | | `include_base_metal_gap` | `true` | – | Include base metal gap layer | | `separate_junctions` | `true` | – | Junctions to separate layer | | `finger_overlap` | `0.2` | μm | Length of fingers inside the pads | | `width` | `22.0` | μm | Width of the junction element. | | `pad_height` | `6.0` | μm | Height of the junction pad. | | `pad_width` | `12.0` | μm | Width of the junction pad. | | `pad_to_pad_separation` | `6.0` | μm | Pad separation. | | `pad_rounding_radius` | `0.5` | μm | Rounding radius of the junction pad. | | `single_junction` | `false` | – | Disable the second junction | | `loop_area` | `100` | μm^2 | Loop area | | `fluxline_type` | `"Fluxline Standard"` | – | Fluxline Type | | `drive_position` | `[-450, 0]` | – | Coordinate for the drive port (µm, µm) | | `include_base_metal_addition` | `true` | – | Include base metal addition layer. | | `shadow_margin` | `1.0` | μm | Shadow layer margin near the the pads | | `offset_compensation` | `0` | μm | Junction lead offset from junction width | | `mirror_offset` | `false` | – | Move the junction lead offset to the other lead | | `height` | `22.0` | μm | Height of the junction element. | | `x_offset` | `0` | μm | Horizontal junction offset. | | `compact_geometry` | `false` | – | Compact geometry for metal addition. | Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows. ## LOM model The cell contributes to the lumped model: | branch | type | nodes | value (estimate at defaults) | |---|---|---|---| | `C_X_1` | C | island1 – gnd | estimate=53.7, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25% | | `C_X_2` | C | island2 – gnd | estimate=53.7, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25% | | `C_X_12` | C | island1 – island2 | estimate=27.6, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25% | | `J_X` | SQUID | island1 – island2 | Lj_nH=6.734, Cj_fF=15, asym=0, flux_phi0=0 | | `Cg_X_cplr` | C | island1 – cplr | estimate=13.8, unit=fF, estimate_source=analytic: coupler 150×20 µm facing island1 across 20 µm (CPS), estimate_kind=analytic, uncertainty=±25% | | `Cc_X_cplr` | C | cplr – gnd | estimate=7.6, unit=fF, estimate_source=rough: coupler pad in the qubit ground gap, estimate_kind=rough, uncertainty=±50% | Nodes: `island1`, `island2`, `cplr`. - X: floating transmon; island2 ↔ coupler capacitance neglected (screened by island1) ## How to use In Python: ```python from quantcore_circuits.designer import Designer d = Designer("demo", box=(0, 0, 7500, 7500)) d.add("U1", "DoublePads", at=(3750, 3750), a=10) # parameters: see the table above d.add("PAD", "BondPad", at=(1125, 3750), rot=270) # a launcher to connect to d.route("L1", "PAD.a", "U1.cplr") # a CPW from the pad to the pin ``` Pin names go into `d.route(...)` as `INSTANCE.pin`, and into `snap=` / `to=` when placing. From the shell: `qcc components DoublePads` lists the pins; add `--schema` for the parameters. In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.