% generated by scripts/make_component_docs.py -- do not edit. Put hand-written notes in docs/components/notes/JunctionTestPads.md (included below). # JunctionTestPads Two probe pads with a trilayer junction between their tips (legacy ``testPad_*`` / ``xtp_testpads``). **Source:** Quantcore. **Category:** test_structure. **Module:** `quantcore_circuits.layouts.others.test_pads`. See also the [catalog](../CATALOG.md). ## Pins ![Pins of JunctionTestPads](../../images/components/JunctionTestPads.png) Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm. No pins: this cell has no ports. Place it with `at=` / `rot=`. **Notes from the catalog:** the legacy QWri test-pad block (Quantcore). KQC's test-structure factory of the same name is kqcircuits.test_structures.junction_test_pads.junction_test_pads.JunctionTestPads (dotted path). ## Parameters | name | default | unit | description | |---|---|---|---| | `a` | `10` | μm | Width of center conductor | | `b` | `6` | μm | Width of gap | | `r` | `100` | μm | Turn radius | | `upper_pad_width` | `500` | μm | Upper pad width | | `upper_pad_height` | `400` | μm | Upper pad height | | `lower_pad_width` | `500` | μm | Lower pad width | | `lower_pad_height` | `400` | μm | Lower pad height | | `upper_pad_trim` | `50` | μm | Upper pad shortened by (towards the window edge) | | `lower_pad_trim` | `50` | μm | Lower pad shortened by (towards the window edge) | | `junction_width` | `20` | μm | Junction window width | | `junction_height` | `20` | μm | Junction window height | | `finger_origin` | `5` | μm | Pad tip distance from the junction | | `finger_width` | `0.5` | μm | Straight finger width | | `second_finger_width` | `0.6` | μm | Bent finger width | | `straight_finger_y` | `-2.4` | μm | Straight finger offset (legacy y) | | `straight_pad_width` | `1.2` | μm | Straight finger lead width | | `straight_finger_length` | `3` | μm | Straight finger length | | `bent_finger_x` | `0.2` | μm | Bent finger offset (legacy x) | | `bent_finger_y` | `-3.4` | μm | Bent finger offset (legacy y) | | `bent_pad_width` | `1.6` | μm | Bent finger lead width | | `bent_finger_length` | `3` | μm | Bent finger length | | `hsq_width` | `0.2` | μm | HSQ box width | | `label_size` | `100` | μm | Label height | | `middle_height` | `300` | μm | Distance between the pads (junction region) | | `box_extra` | `100` | μm | Etch window wider than the upper pad by | | `box_height` | `0` | μm | Etch window height (0 = pads + middle) | | `bent_conn_height` | `0.5` | μm | Bent finger connection height | | `with_hsq` | `true` | – | Draw HSQ sidewall boxes | | `hsq_overlap` | `0.045` | μm | HSQ overlap onto the finger | | `hsq_y_offset` | `-0.85` | μm | HSQ box centre offset (legacy y_off) | | `hsq_extra_low` | `0.1` | μm | HSQ box extra length below | | `hsq_extra_high` | `0.2` | μm | HSQ box extra length above | | `spacer_gradient` | `true` | – | Spacer gradient: 51–53/0 dose levels inside the HSQ (width / 3 strips) | | `label` | `""` | – | Text etched above the pads (empty = none) | | `label_pos` | `[-140, 400]` | μm | Label position [x, y] | Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows. ## LOM model none (a LOM build gives each pin its own bare node, without elements). ## How to use In Python: ```python from quantcore_circuits.designer import Designer d = Designer("demo", box=(0, 0, 7500, 7500)) d.add("U1", "JunctionTestPads", at=(3750, 3750), a=10) # parameters: see the table above # no directed pin: place it with at= / rot=, or snap it with snap= / to= ``` Pin names go into `d.route(...)` as `INSTANCE.pin`, and into `snap=` / `to=` when placing. From the shell: `qcc components JunctionTestPads` lists the pins; add `--schema` for the parameters. In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route. GUI status (`kplugin/COMPONENTS_STATUS.md`): places ok, edit ok, connect n/a (no directed port), build ok. no ports.