% generated by scripts/make_component_docs.py -- do not edit. Put hand-written notes in docs/components/notes/NeckTermination.md (included below). # NeckTermination Shorted CPW end through a taper and a narrow neck in an etched window (QPDK ``neck_termination``). **Source:** Quantcore. **Category:** termination. **Module:** `quantcore_circuits.layouts.others.qpdk_cells`. See also the [catalog](../CATALOG.md). ## Pins ![Pins of NeckTermination](../../images/components/NeckTermination.png) Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm. | pin | x (µm) | y (µm) | direction (°) | a (µm) | b (µm) | purpose | |---|---|---|---|---|---|---| | `o1` | 0 | 0 | 180 | 10 | 6 | LOM node `line` | a, b: CPW centre width and gap where the pin declares them (`–` = not declared). Position and direction are in the cell's own frame (`at=(0, 0)`, `rot=0`). ## Parameters | name | default | unit | description | |---|---|---|---| | `a` | `10` | μm | Width of center conductor | | `b` | `6` | μm | Width of gap | | `r` | `100` | μm | Turn radius | | `taper_length` | `100` | μm | Taper length | | `taper_shape` | `"linear"` | – | Taper profile | | `neck_width` | `2` | μm | Neck width | | `neck_length` | `325` | μm | Neck length | | `window_width` | `380` | μm | Etched window width (across the line) | | `trap_hole_size` | `4` | μm | Trap hole side | | `trap_hole_rows` | `4` | – | Rows of flux-trap holes around the window (0 = none) | | `trap_hole_pitch` | `5.5` | μm | Trap hole pitch | | `trap_hole_offset` | `6` | μm | Ground strip between window and first hole row | | `trap_hole_keepout` | `24` | μm | Hole-free column on the neck axis at the far end | Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows. ## LOM model The cell contributes to the lumped model: - no lumped branches | line | node | length (µm) | a (µm) | b (µm) | ends | |---|---|---|---|---|---| | `X` | `line` | 1278.834 | 10 | 6 | short / short | Nodes: `line`. - X: taper 100 µm + neck 325 µm counted as 1279 µm of 10/6 µm CPW (L' ratio 3.14 for the neck; rough: no neck L_k beyond the CPW formula, no C of the window) ## Simulation export notes - C8: GDS polygon with > 4095 points (XY record > 0x8000 bytes) (status: partly fixed; fix in sim_tools/builder.py (FaceMetal.max_points, DesignSimulation.simplified_region, split_large_polygons); sim_tools/geometry_check.py) ## How to use In Python: ```python from quantcore_circuits.designer import Designer d = Designer("demo", box=(0, 0, 7500, 7500)) d.add("U1", "NeckTermination", at=(3750, 3750), a=10) # parameters: see the table above d.add("PAD", "BondPad", at=(1125, 3750), rot=270) # a launcher to connect to d.route("L1", "PAD.a", "U1.o1") # a CPW from the pad to the pin ``` Pin names go into `d.route(...)` as `INSTANCE.pin`, and into `snap=` / `to=` when placing. From the shell: `qcc components NeckTermination` lists the pins; add `--schema` for the parameters. In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route. GUI status (`kplugin/COMPONENTS_STATUS.md`): places ok, edit ok, connect ok, build ok.