% generated by scripts/make_component_docs.py -- do not edit. Put hand-written notes in docs/components/notes/StripesTestIncreasingWidth.md (included below). # StripesTestIncreasingWidth PCell declaration for optical lithography test stripes. **Source:** KQC (KQCircuits). **Category:** test_structure. **Module:** `kqcircuits.test_structures.stripes_test_increasing_width`. :::{note} Canonical cell of an alias group. Aliases: [`StripesTest`](StripesTest.md). ::: See also the [catalog](../CATALOG.md). ## Pins ![Pins of StripesTestIncreasingWidth](../../images/components/StripesTestIncreasingWidth.png) Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm. No pins: this cell has no ports. Place it with `at=` / `rot=`. ## Parameters | name | default | unit | description | |---|---|---|---| | `a` | `10` | μm | Width of center conductor | | `b` | `6` | μm | Width of gap | | `r` | `100` | μm | Turn radius | | `min_stripe_width` | `1` | μm | Beginning width of the stripe sequence | | `stripe_length` | `100` | μm | Length of the stripes | | `stripe_spacing` | `1` | μm | Spacing between the stripes | | `num_stripes` | `20` | – | Number of stripes | | `stripe_step` | `1` | μm | Stripe widening increment in the stripe sequence | Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows. ## LOM model none (a LOM build gives each pin its own bare node, without elements). ## How to use In Python: ```python from quantcore_circuits.designer import Designer d = Designer("demo", box=(0, 0, 7500, 7500)) d.add("U1", "StripesTestIncreasingWidth", at=(3750, 3750), a=10) # parameters: see the table above # no directed pin: place it with at= / rot=, or snap it with snap= / to= ``` Pin names go into `d.route(...)` as `INSTANCE.pin`, and into `snap=` / `to=` when placing. From the shell: `qcc components StripesTestIncreasingWidth` lists the pins; add `--schema` for the parameters. In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.