% generated by scripts/make_component_docs.py -- do not edit. Put hand-written notes in docs/components/notes/WaveguideCoplanarStraight.md (included below). # WaveguideCoplanarStraight The PCell declaration of a straight segment of a coplanar waveguide. **Source:** KQC (KQCircuits). **Category:** waveguide. **Module:** `kqcircuits.elements.waveguide_coplanar_straight`. See also the [catalog](../CATALOG.md). ## Pins ![Pins of WaveguideCoplanarStraight](../../images/components/WaveguideCoplanarStraight.png) Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm. No pins: this cell has no ports. Place it with `at=` / `rot=`. ## Parameters | name | default | unit | description | |---|---|---|---| | `a` | `10` | μm | Width of center conductor | | `b` | `6` | μm | Width of gap | | `r` | `100` | μm | Turn radius | | `ground_grid_in_trace` | `false` | – | Add ground grid also to the waveguide | | `l` | `30` | – | Length | | `add_metal` | `false` | – | Add trace in base metal addition too | Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows. ## LOM model The cell contributes to the lumped model: - no lumped branches - X: bare KQC CPW segment without ports; no circuit elements ## How to use In Python: ```python from quantcore_circuits.designer import Designer d = Designer("demo", box=(0, 0, 7500, 7500)) d.add("U1", "WaveguideCoplanarStraight", at=(3750, 3750), a=10) # parameters: see the table above # no directed pin: place it with at= / rot=, or snap it with snap= / to= ``` Pin names go into `d.route(...)` as `INSTANCE.pin`, and into `snap=` / `to=` when placing. From the shell: `qcc components WaveguideCoplanarStraight` lists the pins; add `--schema` for the parameters. In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.