# Amplifier designs Six parametric amplifier chips: two travelling-wave amplifiers (Josephson and kinetic-inductance), three JPAs and a kinetic-inductance amplifier from UNSW. They come from the QPDK and twpa-sim projects (MIT) and from a UNSW dataset (CC BY 4.0), rebuilt on the Quantcore PDK. All six are built in the same six steps (die, pads, feed, nonlinear element, routing, whole chip). They hold no qubits, so their LOM section reports amplifier figures where the notebook's model gives them. | Page | What it is | Qubits | Chip size | Builds | |---|---|---|---|---| | [Josephson TWPA](jtwpa_4wm.md) | 4WM travelling-wave amplifier, 64-junction chain | 0 | 7.5 × 7.5 mm | yes | | [Kinetic-inductance TWPA](ki_twpa_serpentine.md) | 16-row serpentine travelling-wave amplifier | 0 | 7.5 × 7.5 mm | yes | | [Flux-pumped CPW JPA](qpdk_cpw_jpa.md) | λ/4 resonator ending in a SQUID, with pump line | 0 | 7.5 × 7.5 mm | yes | | [Lumped JPAs](twpa_sim_jpa.md) | capacitively and inductively coupled lumped JPAs | 0 | 7.5 × 7.5 mm | yes | | [Flux-pumped SQUID JPA](twpa_sim_squid_jpa.md) | lumped SQUID JPA with coupling capacitor and flux line | 0 | 7.5 × 7.5 mm | yes | | [UNSW KIPA](unsw_kipa.md) | kinetic-inductance amplifier with a stepped-impedance filter | 0 | 4 × 11 mm | yes | ```{toctree} :maxdepth: 1 :hidden: jtwpa_4wm ki_twpa_serpentine qpdk_cpw_jpa twpa_sim_jpa twpa_sim_squid_jpa unsw_kipa ```