# Seven-qubit processor A community seven-qubit planar processor: a chain of pocket transmons joined by λ/2 buses, six λ/4 readouts hanging on a ∩-shaped feedline and one charge line. The source is a Qiskit Metal repository by A. Dahima (the README says MIT, but the repository has no LICENSE file); the notebook is a Quantcore PDK rebuild, distributed under GPL-3.0. This notebook is an example of a coupled qubit chain with buses, a feedline that wraps around the qubits, and junctions sized per qubit from a frequency target. ```{image} ../../images/designs/community/seven_qubit_processor.png :alt: The whole seven_qubit_processor chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/community/seven_qubit_processor.ipynb` (an older one-cell version is kept as `seven_qubit_processor.v1.ipynb`) | | Source | `atharveeee-netizen/7-qubit-superconducting-processor` (README badge MIT, no LICENSE file) | | Chip | 10 × 10 mm Quantcore die (the source's chip size) | | On the chip | 3 launchpads · 1 ∩ feedline · 7 pocket transmons · 6 λ/4 readouts · 6 λ/2 buses · 1 charge line | | Builds today | yes (layout built on 2026-11-19 in 16 s) | ## How the notebook builds it ```{image} ../../images/designs/community/seven_qubit_processor_steps.png :alt: The layout segments of seven_qubit_processor, one picture each :width: 100% ``` 1. **Die.** The 10 × 10 mm die with the frame and the device ID `SQP-7Q`. 2. **Bond pads.** Three launchpads (feedline in and out, charge line). 3. **Feedline.** A ∩-shaped line round the chain. 4. **Qubits.** Seven pocket transmons, junctions sized for 4.80 to 5.20 GHz. 5. **Readouts.** Six λ/4 hanger readouts on the feedline. 6. **Coupling.** Six λ/2 buses between neighbouring qubits. 7. **Charge line.** Q4's line, straight down to its pad. 8. **Whole chip.** Sim groups, targets, centring of the core, save. ## LOM estimates Numbers are from a run of this notebook on 2026-11-19 (Setup, Design, Check and the LOM cells, 56 s): QuCat normal modes with QuTiP dressed values. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q0R | Q0 | 4.934 | -390 | R_Q0 | 6.777 | 0.125 | -2.96 | | Q1R | Q1 | 5.069 | -347 | R_Q1 | 6.87 | 0.13 | -3.81 | | Q3R | Q3 | 4.766 | -359 | R_Q3 | 6.961 | 0.135 | -2.83 | | Q5R | Q5 | 4.87 | -355 | R_Q5 | 7.053 | 0.14 | -2.93 | | Q2R | Q2 | 5.165 | -344 | R_Q2 | 7.147 | 0.146 | -3.53 | | Q6R | Q6 | 5.042 | -386 | R_Q6 | 7.238 | 0.152 | -2.55 | | group | pair | ZZ (kHz) | neighbours | hybridised | |---|---|---|---|---| | Q0_Q1 | Q0-Q1 | 17.6 | yes | no | | Q3_Q4_Q5 | Q3-Q5 | -0 | no | no | | Q3_Q4_Q5 | Q3-Q4 | -2.25 | yes | no | | Q3_Q4_Q5 | Q4-Q5 | -4.14 | yes | no | ```{image} ../../images/designs/community/seven_qubit_processor_lom.png :width: 80% :alt: LOM plot of seven_qubit_processor ``` These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. > The notebook `examples/designs/community/seven_qubit_processor.ipynb` (with its `.json` and PNGs) is a Quantcore PDK > rebuild, distributed under GPL; see "Rebuild (Quantcore PDK)" at the end. The `metal:` references in this spec build as written, through the `metal:` wrapper (ports are the Metal pin names, parameters the Metal options); the Quantcore and KQC substitutions are optional. Source: [atharveeee-netizen/7-qubit-superconducting-processor](https://github.com/atharveeee-netizen/7-qubit-superconducting-processor) (A. Dahima). Licence: the README badge says **MIT**, but the repo has no LICENSE file. Read on 2026-11-02: README, `simon_7qubit_complete_chip.py`, `01_Seven_Qubit_Chip_Layout.ipynb` and one GUI screenshot. `seven_qubit_chip_mask.gds` (1.68 MB) was not downloaded. What it is: three related Metal scripts, all following a lecture-series exercise. The **complete routed variant** (`simon_7qubit_complete_chip.py`, specced here) has 7 pocket transmons in a U-shaped chain: Q0–Q1–Q3–Q4–Q5–Q2–Q6. Six meandered buses link neighbours, six "readout" meanders run from qubit pads directly to wirebond pads, and the central Q4 has a charge line. The notebook variant (9 × 7 mm, LineTees, one RouteMixed meander, 3 straight links) is incomplete. A third, star variant (`circular_star_topology.py`) has 7 TransmonPocket6 on a ring. Frame (complete variant): chip 10 × 10 mm centred. **Box (0, 0, 10000, 10000)**, **Designer = source + (5000, 5000)**. CPW Metal defaults (10/6). Silicon (README). The chip uses `metal:TransmonPocket6` and `metal:TransmonPocketCL`; a grounded `Xmon` stands in for the LOM. ### Components Pocket parameters for all qubits: pad_width 455, pad_height 90, pad_gap 30, pocket 650 × 650. Q4 is `TransmonPocketCL` (make_CL: cl_width 10, cl_gap 6, cl_length 20, cl_ground_gap 6, cl_pocket_edge 50). The others are `TransmonPocket6`. | instance | catalog ref | at (x, y) Designer | rot | connection pads (loc_W, loc_H) | |---|---|---|---|---| | Q0 | `metal:TransmonPocket6` | (2500, 5000) | 90 | bus_top (+1, +1), readout (−1, −1) | | Q1 | same | (2500, 6800) | 90 | bus_bot (+1, −1), bus_right (−1, −1), readout (+1, +1) | | Q3 | same | (3650, 5870) | 0 | bus_left (−1, +1), bus_right (+1, −1), readout (+1, +1) | | Q4 | `metal:TransmonPocketCL` | (5000, 5870) | 0 | bus_left (−1, −1), bus_right (+1, −1), 50 × 30 pads; charge line | | Q5 | same as Q3 | (6350, 5870) | 0 | bus_left (−1, −1), bus_right (+1, +1), readout (−1, +1) | | Q2 | same | (7500, 6800) | 90 | bus_bot, bus_left, readout | | Q6 | same | (7500, 5000) | 90 | bus_top, readout | | LP_Q1, LP_Q3, LP_Q5, LP_Q2 | `BondPad` | (2500, 9000), (4000, 9200), (6000, 9200), (7500, 9000) | 180 (faces S) | Metal LaunchpadWirebond defaults | | LP_Q0, LP_Q6 | `BondPad` | (2500, 3000), (7500, 3000) | 0 (faces N) | | Junctions (README): L_J 10–12.3 nH. The Q3D/LOM run on Q4 gives L_q 12.305 nH, C_q 74.70 fF, so use `junction={"Lj_nH": 12.3, "Cj_fF": 0}`. ### Routes | route | from → to | type, length | notes | |---|---|---|---| | Bus_Q0_Q1, Bus_Q1_Q3, Bus_Q3_Q4, Bus_Q4_Q5, Bus_Q5_Q2, Bus_Q2_Q6 | bus pad → bus pad | meander (no total_length given, so Metal default 7 mm), fillet 99 | NN capacitive buses along the chain | | Readout_Qx (Q0, Q1, Q3, Q5, Q2, Q6) | Qx.readout → LP_Qx | meander (default 7 mm), fillet 99 | **galvanic to the pad**: a capacitively coupled line to a port, not a resonator. Q4 has no readout | ### LOM node structure A chain of 7 floating transmons coupled by 6 meander buses (each a λ/2-ish resonator bus with C_g at both ends). Six qubits are capacitively coupled straight to 50 Ω lines (very low Q_ext). Q4 has a charge line. README targets (not realised by this script): f_q 4.8–5.2 GHz, α −280…−330 MHz, f_r 6.8–7.4 GHz, g 50–70 MHz, C_in 2 fF, C_c 4 fF. ### Targets Q4 extraction: f_Q 4.974 GHz, E_C 259.3 MHz, E_J 13.27 GHz, α −297.2 MHz, T1 Purcell limit 36 µs. ### Simplifications for a first rebuild 1. The source has no feedline and no readout resonators. A rebuild can replace each Readout_Qx with a λ/4 hanger (6.8–7.4 GHz, 100 MHz steps) on a feedline between two of the pads. Buses become fixed-length meanders (e.g. 7000) between `Xmon` claws. ### Rebuild (Quantcore PDK) - **Frame and stack:** the PDK die frame (10 × 10 mm box, device ID `SQP-7Q`) and the PDK stack (sapphire). - **Qubits:** the source's cells and options through `metal:` wrappers, at the source's positions (Designer = source + (5000, 5000)). Six are `TransmonPocket6` and Q4 is `TransmonPocketCL`: pads 455 × 90 µm, gap 30 µm, pocket 650 × 650 µm. - **Connection pads:** the corners are chosen so each bus pad faces its neighbour. - **Junctions:** `Quantcore Junction` (`registry.trilayer_junction`), sized with `size_junction` for a staggered 4.80–5.20 GHz plan (README window) at the LOM C_Σ of 63.5 fF (source Q3D 74.7 fF). R_n is 76–95 kΩ, outside the PDK window of 40–50 kΩ. - **Readouts (substituted):** the source's six "readout" meanders run galvanically to wirebond pads. Here they are six λ/4 hangers (250 µm coupled section, 6 µm ground strip, shorted) on one ∩-shaped feedline round the chain, at 6.8–7.3 GHz (README). - **Buses:** the six buses are 7 mm λ/2s. The two outer ones are drawn serpentines with a pinned length of 6994 µm; the four inner ones are qcc meanders on waypoints. - **Q4's charge line** is routed to a launchpad at the bottom centre (the source leaves it unrouted). - **Pads:** three `metal:LaunchpadWirebond`s. - **Test:** the fast `test_examples -k seven_qubit` run passes (6 tests). - **Snapshots:** `seven_qubit_processor{,_chain,_q0q1,_jj}.png` show the U chain, the ∩ feedline, the hangers and the PDK frame.