# Near-ms transmon sample (Tuokkola) The sample of Tuokkola et al. (Aalto University and VTT), whose transmons reach near-millisecond coherence times: four transmons, each read out by a λ/4 hanger on a shared Purcell filter between two capacitors, with two drive lines. The data and fab GDS are on Zenodo (CC BY 4.0); the notebook is a Quantcore PDK rebuild (GPL-3.0) from the local Zenodo files and keeps the original chip as a reference file. This notebook is an example of junctions sized from measured qubit frequencies, a Purcell filter in front of the readouts, and a rebuild checked against a reference layout. ```{image} ../../images/designs/community/tuokkola_near_ms_transmon.png :alt: The whole tuokkola_near_ms_transmon chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/community/tuokkola_near_ms_transmon.ipynb` (an older one-cell version is kept as `tuokkola_near_ms_transmon.v1.ipynb`) | | Source | Zenodo record 14651787 (`sample.gds`, chip EITR2), CC BY 4.0 | | Chip | 10 × 10 mm Quantcore die (the sample's size) | | On the chip | 4 launchpads · 4 pocket transmons · 2 filter capacitors and the Purcell filter · 4 λ/4 hanger readouts · 2 feed lines · 2 drive lines | | Builds today | yes (layout built on 2026-11-19 in 15 s) | ## How the notebook builds it ```{image} ../../images/designs/community/tuokkola_near_ms_transmon_steps.png :alt: The layout segments of tuokkola_near_ms_transmon, one picture each :width: 100% ``` 1. **Die.** The 10 × 10 mm die with the frame and the device ID `EITR2-QCT`. 2. **Qubits.** Four pocket transmons, junctions sized for the measured frequencies. 3. **Filter.** The Purcell filter between its two capacitors. 4. **Readouts.** Four λ/4 hangers on the filter. 5. **Centre.** The circuit is centred in the die before the pads. 6. **Bond pads.** Four launchpads on the 100 µm pad rule. 7. **Lines.** The feed lines and the two drive lines. 8. **Whole chip.** Sim groups, targets, save. ## LOM estimates Numbers are from a run of this notebook on 2026-11-19 (Setup, Design, Check and the LOM cells, 20 s): QuCat normal modes with QuTiP dressed values. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q1R | Q1 | 4.023 | -214 | R_Q1 | 5.845 | 0.00918 | -3.05 | | Q2R | Q2 | 2.83 | -241 | R_Q2 | 5.957 | 0.00973 | -1.36 | | Q3R | Q3 | 4.483 | -206 | R_Q3 | 6.082 | 0.0102 | -4.21 | | Q4R | Q4 | 3.284 | -230 | R_Q4 | 6.192 | 0.0108 | -1.56 | ```{image} ../../images/designs/community/tuokkola_near_ms_transmon_lom.png :width: 80% :alt: LOM plot of tuokkola_near_ms_transmon ``` These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. > The notebook `examples/designs/community/tuokkola_near_ms_transmon.ipynb` (with its `.json` and PNGs) is a Quantcore PDK > rebuild from the local Zenodo files in `components/Zenodo_files/`. The reference chip is > `examples/designs/community/tuokkola_near_ms_transmon_sample.oas`. Source: [zenodo.org/records/14651787](https://zenodo.org/records/14651787), Data and GDS file for *"Methods to achieve near-millisecond energy relaxation and dephasing times for a superconducting transmon qubit"*. The authors are M. Tuokkola, Y. Sunada, H. Kivijärvi, J. Albanese, L. Grönberg, J.-P. Kaikkonen, V. Vesterinen, J. Govenius and M. Möttönen (Aalto University and VTT). The record was published 2025-01-15, v4, licence **CC BY 4.0**. Local copy: `components/Zenodo_files/Zenodo_files/`: - `README.txt`: T1/T2echo data layout only, no device parameters; - `sample.gds`: the measured chip `EITR2`, 10 × 10 mm, centred on (0, 0); - `Supplementary_material/Sample_design.gds`: the 30 × 35 mm wafer layout, cells `chip0`…`chip19` of 5 × 5 mm each; - `Supplementary_material/`: also the sample-holder cavity STEP/PDF files and RO/T1 data; - `data/Cooldown1|2/Q1–Q4_results`: T1/T2echo IQ traces. ### Chip read from `sample.gds` (EITR2; µm, source centred on (0, 0), Designer = source + (5000, 5000)) Read with klayout.db: 39 232 base-metal gap polygons on layer 130/1 and junction layers 8/0 and 8/1. The layers were copied into `tuokkola_near_ms_transmon_sample.oas`. | element | geometry | |---|---| | qubits Q1–Q4 | floating two-pad transmons. Pocket 800 × 1000, pads 400 × 300, pad gap 20, coupler bar 400 × 20 at 40 µm from the pad with an 11/5 µm lead. Centres (−100, 2513), (1400, 2513), (1400, −2513), (−100, −2513); Q3/Q4 rotated 180°. Q1 and Q3 have SQUIDs, Q2 and Q4 single junctions (junction layers 8/0, 8/1) | | Purcell filter | U-shaped λ/2 CPW 21/11 µm. Top run y = +650, bottom run y = −650, U at x = +1816. Input finger capacitor (2 fingers, 100 µm) at the top left, output interdigital capacitor (7 fingers, 500 µm) at the bottom left | | readouts | four λ/4s (CPW 11/5 µm), each from a qubit's coupler bar, meandered, with 900 µm coupled to the filter across a 31 µm ground strip, shorted | | drive lines | two, each shared by a qubit pair (Q1 + Q2 top, Q3 + Q4 bottom), open 5 µm ends between the pockets | | launchers | 2 filter ports on the left edge (y = ±650), 2 drive ports at the top and bottom | | other | chip labels `EITR2` and `1-0`, corner marks, a ground-plane hole grid, a junction test column on the right edge, and one unconnected meander at the top left | **Targets:** qubit frequencies 4.047 / 2.890 / 4.593 / 3.295 GHz (Q1–Q4) and readouts 5.85–6.23 GHz. They were taken from the paper (first cooldown) and still need checking against it (arXiv 2407.18778); the Zenodo README gives no frequencies. ### Rebuild (Quantcore PDK) - **Frame and stack:** the PDK die frame (10 × 10 mm box, device ID `EITR2-QCT`) and the PDK stack (sapphire). - **Qubits:** `metal:TransmonPocket6` with the GDS pad and pocket sizes; the coupler bar is a centred 400 × 20 µm connection pad. - **Junctions:** `Quantcore Squid` (Q1, Q3) and `Quantcore Junction` (Q2, Q4), sized with `size_junction` at the LOM C_Σ of 96 fF. R_n is 77–184 kΩ, all outside 40–50 kΩ: the 2.9–4.6 GHz qubits are at or below the PDK's 4–8 GHz. - **Purcell filter:** a qcc `cpw` route between two `FingerCapacitorSquare`s (2 × 100 µm in, 7 × 500 µm out) on the GDS's runs and U. - **Readouts:** λ/4 hangers on the filter route (900 µm, 31 µm ground strip), v_ph/4f × 0.93. - **Drive lines:** routes to open free ends. - **Not rebuilt:** the label texts, the hole grid (PDK: cheese at fab export only), the junction test column and the unconnected meander. - **Quick check** (script run of the cells, not nbclient): - DRC: 0 errors, 8 `dangling_port`; - LOM: 17 nodes; - LOM sim: f_q 4.023 / 2.830 / 4.483 / 3.284 GHz (0.3–2.4 % below the targets), f_r 5.851 / 5.964 / 6.088 / 6.199 GHz (within 0.5 %), χ −1.3…−4.1 MHz; - κ_r ≈ 10 kHz, too small: the LOM lumps the filter between its two series capacitors (as in metal/m52); - FEM: 4 q3d + 4 eigenmode jobs, each with `Q.island1/2` nets. - **Snapshots:** `tuokkola_near_ms_transmon{,_q2,_cout,_reference}.png` (rebuild and sample side by side).