# Google coupler plaquette The smallest closed plaquette of Sycamore's coupler lattice: four flux-tunable Xmon-type qubits on the corners of a square and a flux-tunable transmon coupler on each of the four bonds. Every qubit has a λ/4 readout, an XY line and a Z line; every coupler has a Z line. No Sycamore layout is public; the papers (Arute et al. 2019; Yan et al. 2018) give the targets, and the layout is ours (GPL). This notebook tiles the lattice cell into a plaquette: the same qubit and coupler as `google_tc_cell`, mirrored round the die centre, with two feedlines and sixteen pads. ```{image} ../../images/designs/google/google_tc_2x2.png :alt: The whole google_tc_2x2 chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/google/google_tc_2x2.ipynb` (an older one-cell version is kept as `google_tc_2x2.v1.ipynb`) | | Source | Arute et al., Nature 574, 505 (2019); Yan et al., PR Applied 10, 054062 (2018); no public layout | | Chip | 10 × 10 mm Quantcore die, sapphire 650 µm (εr 10.25), CPW 10 / 6 µm | | On the chip | 4 qubits · 4 couplers · 4 λ/4 hangers · 2 feedlines · 16 bond pads | | Builds today | yes (layout built on 2026-11-19 in 12 s) | ## How the notebook builds it Each Design segment is one cell with a picture of the chip so far (see [the notebook template](../notebook-template.md)). ```{image} ../../images/designs/google/google_tc_2x2_steps.png :alt: The layout segments of google_tc_2x2 :width: 100% ``` 1. **Die.** A 10 × 10 mm die, because the plaquette needs sixteen pads. 2. **Bond pads.** Sixteen pads: feedline ends, an XY and a Z pad per qubit, a Z pad per coupler. 3. **Feedlines.** Two vertical feedlines, left and right. 4. **Qubits.** Four crosses with Quantcore trilayer SQUIDs. 5. **Readouts.** Four λ/4 readouts, each ending in a hanger on its feedline. 6. **Coupling.** Four coupler crosses and the declared capacitances. 7. **Control lines.** The XY and Z lines, with a KQC airbridge where a coupler's Z line crosses a feedline. 8. **Whole chip.** The centring check, targets, sim groups and the save. ## LOM estimates Numbers are from a run of this notebook on 2026-11-19 (Setup, Design, Check and the LOM cells, 36 s): QuCat normal modes with QuTiP dressed values. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q00+R | Q00 | 6.668 | -236 | R_Q00 | 4.487 | 0.663 | -0.172 | | Q10+R | Q10 | 6.668 | -236 | R_Q10 | 4.566 | 0.697 | -0.196 | | Q01+R | Q01 | 6.668 | -236 | R_Q01 | 4.527 | 0.68 | -0.184 | | Q11+R | Q11 | 6.668 | -236 | R_Q11 | 4.606 | 0.714 | -0.21 | | L_J,c (nH) | Φ/Φ0 | f_c (GHz) | α_c (MHz) | f_q1 (GHz) | f_q2 (GHz) | 2·abs(g̃) (MHz) | g̃ (MHz) | g̃ Yan Eq. 5 (MHz) | ZZ (kHz), q2 detuned | |---|---|---|---|---|---|---|---|---|---| | 6 | 0 | 8.765 | -424 | 6.567 | 6.577 | 10 | 5.01 | 5.1 | -200 | | 6.5 | 0.126 | 8.408 | -423 | 6.567 | 6.575 | 7.7 | 3.85 | 3.98 | -155 | | 7 | 0.172 | 8.09 | -421 | 6.567 | 6.572 | 4.7 | 2.35 | 2.53 | -114 | | 7.25 | 0.19 | 7.944 | -418 | 6.567 | 6.57 | 2.84 | 1.42 | 1.64 | -97.9 | | 7.5 | 0.205 | 7.806 | -414 | 6.567 | 6.568 | 0.664 | 0.332 | 0.614 | -89.1 | | 7.75 | 0.218 | 7.675 | -408 | 6.567 | 6.565 | 1.91 | -0.955 | -0.596 | -92 | | 8 | 0.23 | 7.551 | -400 | 6.562 | 6.567 | 5 | -2.5 | -2.03 | -115 | | 8.5 | 0.251 | 7.322 | -367 | 6.554 | 6.567 | 13.5 | -6.73 | -5.87 | -296 | | 9 | 0.268 | 7.118 | -302 | 6.54 | 6.567 | 27.2 | -13.6 | -11.7 | -1030 | | 9.25 | 0.275 | 7.027 | -256 | 6.53 | 6.567 | 37.5 | -18.8 | -15.8 | -2060 | | 9.5 | 0.282 | 6.943 | -207 | 6.515 | 6.567 | 51.7 | -25.9 | -20.9 | -4400 | | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q00–CB–Q10 | Q10 | 6.119 | -229 | – | – | – | – | | Q01–CT–Q11 | Q01 | 6.119 | -229 | – | – | – | – | | Q00–CL–Q01 | Q01 | 6.119 | -229 | – | – | – | – | | Q10–CR–Q11 | Q10 | 6.119 | -229 | – | – | – | – | | group | pair | ZZ (kHz) | neighbours | hybridised | |---|---|---|---|---| | Q00–CB–Q10 | Q00-Q10 | -88.5 | yes | no | | Q00–CB–Q10 | CB-Q10 | -7610 | yes | no | | Q00–CB–Q10 | CB-Q00 | -17000 | yes | no | | Q01–CT–Q11 | Q01-Q11 | -88.5 | yes | no | | Q01–CT–Q11 | CT-Q01 | -7610 | yes | no | | Q01–CT–Q11 | CT-Q11 | -17000 | yes | no | | Q00–CL–Q01 | Q00-Q01 | -88.5 | yes | no | | Q00–CL–Q01 | CL-Q01 | -7610 | yes | no | | Q00–CL–Q01 | CL-Q00 | -17000 | yes | no | | Q10–CR–Q11 | Q10-Q11 | -88.5 | yes | no | | Q10–CR–Q11 | CR-Q10 | -7610 | yes | no | | Q10–CR–Q11 | CR-Q11 | -17000 | yes | no | ```{image} ../../images/designs/google/google_tc_2x2_lom.png :width: 80% :alt: LOM plot of google_tc_2x2 ``` These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. **Sources.** As `google_tc_cell.md`: Arute et al., Nature 574, 505 (2019) and SI (arXiv:1910.11333): square lattice of transmons with a tunable coupler on every nearest-neighbour bond (54 qubits, 88 couplers), per-qubit XY and Z lines, a Z line per coupler, Table 2 parameters, g̃ from +5 to −40 MHz; Yan et al., PR Applied 10, 054062 (2018): scheme, Eq. (5). **Licence.** Papers cited for parameters only (no public layout); layout and code ours, GPL. **What it is.** The smallest closed plaquette of the coupler lattice: 4 flux-tunable Xmon-type qubits at the corners of a square (qubit pitch 660 µm), 4 flux-tunable couplers on the bonds; same qubit, coupler, junctions and coupling gaps as `google_tc_cell`. **Chip.** 10 × 10 mm, Quantcore die frame (QCT), device ID `GTC4Q`; sapphire 650 µm, εr 10.25; 10/6 µm CPW; Quantcore trilayer SQUIDs (L_J 6.01 nH, R_n ≈ 40 kΩ, C_J 16.8 fF) on all eight crosses. 16 BondPads (5 bottom, 5 top, 3 per side). **Notebook.** `examples/designs/google/google_tc_2x2.ipynb`. ### Components | instance | catalog ref | key params (µm) | at (x, y) | rot | notes | |---|---|---|---|---|---| | Q00, Q10, Q01, Q11 | metal:TransmonCrossFL | cross 160 / 30 / 30, claw `readout` (130 / 30 / 4 / 3) on the outer x arm, flux line | (5000 ∓ 330, 5000 ∓ 330) | 0 (bottom), 180 (top) | SQUID arm points out of the plaquette in y | | CB, CT, CL, CR | metal:TransmonCrossFL | cross 70 / 20 / 20, no claws, flux line | bond midpoints | 0, 180, −90, 90 | SQUID arm points out of the plaquette | | XY_*_end | metal:OpenToGround | | outer diagonal of each cross (−110, −170 from its centre, mirrored) | ±90 | XY drive ends | | pads | BondPad | | edges | | FLL/FLR in/out, Z_CL/Z_CR (sides), XY/Z per qubit + Z_CB/Z_CT (bottom/top) | ### Routes | route | from → to | type, length | notes | |---|---|---|---| | FLL, FLR | side pads | cpw, 9014 µm | vertical feedlines at x = 2700 / 7300 | | R_Q00 … R_Q11 | claw → hanger | meander 6243 / 6122 / 6182 / 6064 µm | λ/4, hanger 900 µm at y = 3300 / 6700, ground gap 4, short | | XY_*_line | pad → XY end | cpw 4624 µm | | | Z_Q*_line, Z_CB/CT_line | flux line → pad | cpw | | | Z_CL_line, Z_CR_line | flux line → side pad | cpw, airbridge over FLL / FLR | the only crossings | ### LOM node structure 8 grounded islands with SQUIDs; on each bond C_QC (2.35 fF) qubit–coupler twice and C_QQ (0.28 fF) qubit–qubit; the two diagonals 0.08 fF (all `d.couple` CPS estimates; the Q3D job `plaquette` replaces them); readout claws → λ/4 TLres → HANGER → FLL / FLR; XY ends 50 Ω; Z lines flux_bias controls. ### Targets and LOM values | quantity | source | rebuild (LOM) | |---|---|---| | f_q | 6.661 GHz idle | 6.668 GHz (qubit + readout); 6.567 GHz with the coupler at the off point; checkerboard partner 6.119 GHz | | α | −208 MHz | −237 MHz alone, −225 MHz with the coupler | | f_r | 4.618 GHz median | 4.56 / 4.60 / 4.64 / 4.68 GHz targets (lengths set for them) | | κ | 0.64 MHz | ≈ 0.67–0.72 MHz | | g̃ | +5 … −40 MHz | +5.0 MHz (f_c 8.77 GHz) → 0 at 7.77 GHz → −18.8 MHz (7.03 GHz) → −25.9 MHz (6.94 GHz) | | static ZZ at idle | – | −88 kHz per bond (couplers off, checkerboard 0.45 GHz) | ### Simplifications / adaptations Planar die: two feedlines (no Purcell filters), two airbridges; axis-aligned plaquette (Sycamore's is diagonal); the plaquette idle is simulated bond by bond (eight junctions in one QuCat network exceed its symbolic solver).