# IBM 27-qubit Falcon IBM's heavy-hex lattice cut as the 27-qubit Falcon (ibmq_montreal): fixed-frequency transmons on the vertices and edges of a hexagonal lattice, each pair coupled by a resonant bus. It is two rows of ten qubits, three bridge qubits and four spur qubits. No layout is public; IBM's device data give the graph and targets, and the layout is ours. This notebook generates a lattice from a graph: a `heavy_hex(rows)` helper makes the 27 qubits and 28 edges, then the notebook places pockets, hangers on three feedlines and one λ/2 bus per edge. It is a large build (33 instances, 58 routes). ```{image} ../../images/designs/ibm/ibm_falcon_27q.png :alt: The whole ibm_falcon_27q chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/ibm/ibm_falcon_27q.ipynb` (an older one-cell version is kept as `ibm_falcon_27q.v1.ipynb`) | | Source | IBM published device data (ibmq_montreal coupling map); Chamberland et al., PRX 10, 011022 (2020); no public layout | | Chip | 27 × 15.2 mm Quantcore die, sapphire 650 µm (εr 10.25) | | On the chip | 27 pocket transmons · 27 λ/4 hanger readouts · 28 λ/2 buses · 3 feedlines · 6 bond pads | | Builds today | yes (layout built on 2026-11-19 in 28 s) | ## How the notebook builds it Each Design segment is one cell with a picture of the chip so far (see [the notebook template](../notebook-template.md)). ```{image} ../../images/designs/ibm/ibm_falcon_27q_steps.png :alt: The layout segments of ibm_falcon_27q :width: 100% ``` 1. **Die.** A die sized to the lattice (2.5 mm margins round ten 2.2 mm columns), with the QCT frame and the device ID `HHX27`. 2. **Bond pads.** The three feedlines' pads on the west and east edges. 3. **Feedlines.** Three straight feedlines; the middle one crosses the three bridge buses on airbridges. 4. **Qubits.** 27 `TransmonPocket6` pockets with trilayer junctions, and their bus and readout pads. 5. **Readouts.** 27 λ/4 readouts, each ending in a 300 µm hanger. 6. **Coupling.** 28 λ/2 meander buses, one per edge. 7. **Control lines.** None: the planar die drives qubits through the feedlines. 8. **Whole chip.** The centring check, targets, sim groups and the save. ## LOM estimates Numbers are from the saved output of the `.v1` notebook (this chip was not re-run for these docs): QuCat normal modes with QuTiP dressed values, each qubit solved with its readout and the feedline. IBM's measured values are left out. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q0+R0 | Q0 | 4.929 | -151 | R0 | 7.16 | 0.317 | -0.422 | | Q1+R1 | Q1 | 4.826 | -144 | R1 | 7.271 | 0.331 | -0.347 | | Q2+R2 | Q2 | 4.966 | -146 | R2 | 7.152 | 0.316 | -0.47 | | Q3+R3 | Q3 | 5.101 | -145 | R3 | 7.286 | 0.333 | -0.603 | | Q4+R4 | Q4 | 5.027 | -147 | R4 | 7.215 | 0.324 | -0.385 | | Q5+R5 | Q5 | 5.01 | -146 | R5 | 7.229 | 0.325 | -0.577 | | Q6+R6 | Q6 | 4.968 | -150 | R6 | 7.328 | 0.339 | -0.504 | | Q7+R7 | Q7 | 4.914 | -143 | R7 | 7.082 | 0.307 | -0.6 | | Q8+R8 | Q8 | 4.92 | -143 | R8 | 7.088 | 0.307 | -0.406 | | Q9+R9 | Q9 | 5.063 | -149 | R9 | 7.33 | 0.339 | -0.541 | | Q10+R10 | Q10 | 5.074 | -146 | R10 | 7.159 | 0.317 | -0.412 | | Q11+R11 | Q11 | 5.01 | -146 | R11 | 7.225 | 0.325 | -0.577 | | Q12+R12 | Q12 | 4.967 | -143 | R12 | 7.321 | 0.338 | -0.377 | | Q13+R13 | Q13 | 4.871 | -147 | R13 | 7.218 | 0.324 | -0.423 | | Q14+R14 | Q14 | 4.961 | -142 | R14 | 7.274 | 0.331 | -0.568 | | Q15+R15 | Q15 | 5.028 | -147 | R15 | 7.285 | 0.333 | -0.372 | | Q16+R16 | Q16 | 5.055 | -145 | R16 | 7.166 | 0.317 | -0.618 | | Q17+R17 | Q17 | 5.063 | -149 | R17 | 7.333 | 0.339 | -0.54 | | Q18+R18 | Q18 | 4.961 | -142 | R18 | 7.084 | 0.307 | -0.623 | | Q19+R19 | Q19 | 4.966 | -143 | R19 | 7.093 | 0.308 | -0.421 | | Q20+R20 | Q20 | 5.063 | -149 | R20 | 7.34 | 0.34 | -0.539 | | Q21+R21 | Q21 | 5.074 | -146 | R21 | 7.235 | 0.326 | -0.396 | | Q22+R22 | Q22 | 5.056 | -145 | R22 | 7.224 | 0.325 | -0.6 | | Q23+R23 | Q23 | 4.966 | -146 | R23 | 7.3 | 0.335 | -0.438 | | Q24+R24 | Q24 | 5.059 | -145 | R24 | 7.17 | 0.318 | -0.503 | | Q25+R25 | Q25 | 4.915 | -143 | R25 | 7.279 | 0.332 | -0.547 | | Q26+R26 | Q26 | 5.015 | -149 | R26 | 7.17 | 0.318 | -0.564 | | pair | f_a (GHz) | f_b (GHz) | J (MHz) | target J (MHz) | ZZ (kHz) | |---|---|---|---|---|---| | Q3-Q5 | 5.104 | 5.012 | 1.46 | 1.49 | 70.7 | | Q5-Q8 | 5.012 | 4.92 | 1.52 | 1.41 | 74.5 | | Q8-Q11 | 4.92 | 5.012 | 1.11 | 1.47 | 51.1 | | Q11-Q14 | 5.012 | 4.966 | 1.52 | 1.4 | 51.9 | | Q14-Q16 | 4.966 | 5.058 | 1.17 | 1.55 | 56.4 | | Q16-Q19 | 5.058 | 4.966 | 1.62 | 1.47 | 84.4 | | Q19-Q22 | 4.966 | 5.058 | 1.17 | 1.49 | 57 | | Q22-Q25 | 5.058 | 4.92 | 1.62 | 1.36 | 476 | | Q25-Q26 | 4.92 | 5.015 | 1.18 | 1.43 | 56.4 | | Q0-Q1 | 4.928 | 4.825 | 1.3 | 1.31 | 58.3 | | Q1-Q4 | 4.825 | 5.027 | 0.895 | 1.32 | -25.3 | | Q4-Q7 | 5.027 | 4.92 | 1.39 | 1.44 | 76.9 | | Q7-Q10 | 4.92 | 5.073 | 0.994 | 1.42 | -261 | | Q10-Q12 | 5.073 | 4.966 | 1.49 | 1.58 | 88.6 | | Q12-Q15 | 4.966 | 5.027 | 1.05 | 1.49 | 31.4 | | Q15-Q18 | 5.027 | 4.966 | 1.39 | 1.7 | 45.9 | | Q18-Q21 | 4.966 | 5.073 | 1.05 | 1.49 | 58.8 | | Q21-Q23 | 5.073 | 4.965 | 1.58 | 1.42 | 101 | | Q2-Q3 | 4.962 | 5.104 | 1.5 | 1.36 | 1.08e+03 | | Q1-Q2 | 4.819 | 4.965 | 1.31 | 1.4 | -1.81e+03 | | Q13-Q14 | 4.867 | 4.966 | 1.26 | 1.36 | 78.4 | | Q12-Q13 | 4.96 | 4.87 | 1.55 | 1.36 | 81.1 | | Q24-Q25 | 5.055 | 4.92 | 1.59 | 1.51 | 336 | | Q23-Q24 | 4.962 | 5.058 | 1.5 | 1.3 | 100 | | Q8-Q9 | 4.913 | 5.062 | 1.55 | 1.42 | 2.02e+03 | | Q19-Q20 | 4.96 | 5.062 | 1.64 | 1.46 | 126 | | Q6-Q7 | 4.967 | 4.92 | 1.37 | 2.01 | 42.1 | | Q17-Q18 | 5.062 | 4.966 | 1.54 | 1.52 | 77 | The pair table lists the exchange coupling J and the static ZZ for the 29 qubit-bus-qubit edges. The edges Q22-Q25 (476 kHz), Q2-Q3 (1.08 MHz), Q1-Q2 (-1.81 MHz) and Q8-Q9 (2.02 MHz) are frequency collisions: the PDK's α of about -145 MHz puts IBM's neighbour detunings near |α|. These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. **Sources.** - **Device data (primary):** Qiskit `FakeMontreal` backend files `conf_montreal.json` / `props_montreal.json` from `qiskit-ibm-runtime` (Apache-2.0; ibmq_montreal, Falcon r4, snapshot 2021-03-15; local copy `build/external/qiskit_fake_backends/`): the 28-edge coupling map, f_q 4.835–5.105 GHz, α −308 … −390 MHz, J (`jq`) 1.31–2.01 MHz on every edge, measurement LO centres 7.19–7.46 GHz (all values in the notebook's cell 1). - **Lattice:** Chamberland, Zhu, Yoder, Hertzberg, Cross, "Topological and subsystem codes on low-degree graphs with flag qubits", PRX 10, 011022 (2020) (arXiv:1907.09528): heavy-hexagon lattice, degree ≤ 3, cross-resonance gates on "fixed-frequency transmon qubits via microwave-resonant buses", typical f01 ≈ 5 GHz, α ≈ −330 … −340 MHz; IBM Research blog "The IBM Quantum heavy hex lattice" (2021). - **Device:** Jurcevic et al., "Demonstration of quantum volume 64 on a superconducting quantum computing system", Quantum Sci. Technol. 6, 025020 (2021) (arXiv:2008.08571): ibmq_montreal, qubits on a die bump-bonded to an interposer for signal delivery and readout. **Licence.** Apache-2.0 data, papers cited; no heavy-hex layout is public (searched GitHub, Qiskit Metal, SQuADDS); layout and code ours (GPL). **What it is.** 27 fixed-frequency floating transmons on the Falcon heavy-hex cut: two long rows of ten (bottom columns 1–10, top 0–9), three bridge qubits (columns 1, 5, 9), four spurs (columns 3, 7 above and below); one λ/2 meander bus per edge (28); a λ/4 readout per qubit on three horizontal feedlines (top: above the top spurs; middle: through the band between the rows, with airbridges over the three upper bridge buses; bottom: below the bottom spurs). **Generator.** `heavy_hex(rows, offset=1)` (notebook cell 1): long rows → bridges at c ≡ offset + 2r (mod 4) → spurs. Falcon = `heavy_hex([(1, 10), (0, 9)])`; `heavy_hex([(0, 13)] + [(0, 14)] * 5 + [(1, 14)], offset=0, spurs=False)` gives the 127-qubit, 144-edge Eagle graph (a layout of it needs more feedlines). **Chip.** 27.0 × 15.2 mm, Quantcore die frame (QCT), device ID `HHX27`; sapphire 650 µm, εr 10.25; 10/6 µm CPW; column pitch 2200 µm, level pitch 2400 µm. Junctions: Quantcore trilayer, L_J per qubit 6.49–7.17 nH (R_n 43–48 kΩ). **Notebook.** `examples/designs/ibm/ibm_falcon_27q.ipynb`. ### Components and routes | item | ref / type | notes | |---|---|---| | Q0 … Q26 | metal:TransmonPocket6 | pads 750 × 160, gap 20, pocket 950; bus pads 125 (corners ±x at +190 µm for row edges, middles ±y for vertical edges), readout pad 120 | | B_a_b (28) | meander route | λ/2; row edges 6.2 / 6.5 GHz alternating, vertical edges 6.35 GHz (assumed); length 60 400 / f µm (calibrated) | | R0 … R26 | meander → hanger | λ/4 3975–4121 µm, hanger 300 µm, ground gap 4, short; bridges' readouts leave a corner pad and run +x 1 mm first | | FL_top, FL_mid, FL_bot | cpw | BondPads on the side edges; FL_mid has airbridges at columns 1, 5, 9 | ### Targets and LOM values | quantity | IBM | rebuild (LOM) | |---|---|---| | f_q | 4.835–5.105 GHz | 4.826–5.101 GHz, every qubit within 30 MHz (per-qubit L_J solved) | | α | −308 … −390 MHz | ≈ −145 MHz (PDK window) | | readout | 7.19–7.46 GHz | within 3 MHz; κ 0.32–0.35 MHz, χ −0.33 … −0.57 MHz | | buses | – | 6.23 / 6.51 / 6.37 GHz (row even / row odd / vertical) | | J | 1.31–2.01 MHz | 0.84–1.51 MHz (bus pads 125 µm; the 6.5 GHz buses give the low end); ZZ 27–107 kHz on 22 edges | ### Simplifications / adaptations Planar single die (Falcon: qubit die + interposer): readout on three feedlines with three airbridges, no drive lines (drive through the feedlines), no Purcell filters. α about half of IBM's (PDK junction window). Bus frequencies are not published: assumed plan. **Frequency collisions.** IBM's frequency pattern assumes α ≈ −330 MHz. With the PDK's α ≈ −145 MHz, neighbour detunings of 0.1–0.2 GHz sit near |Δ| ≈ |α| and the static ZZ becomes large on six edges: Q8–Q9 1.83 MHz, Q1–Q2 −1.71 MHz, Q2–Q3 0.93 MHz, Q22–Q25 0.40 MHz, Q24–Q25 0.29 MHz, Q7–Q10 −0.23 MHz. A Quantcore heavy-hex chip needs Chamberland §II C's allocation redone for its α, or a junction window that reaches larger α.