# Junction test chip (chip_04) A test chip with no qubits: 45 pairs of probe pads in a 9 × 5 array, each pair joined by a small trilayer Josephson junction. The bottom finger width changes along the columns (0.4 to 1.0 µm) and the top finger down the rows (0.4 to 0.8 µm), so probing the 45 resistances shows how junction resistance follows finger width. It is Quantcore's own test chip from the QWri legacy script `chip_04_test_chip_TL.py`. The rebuild draws it from Quantcore PDK parts and values each junction on the PDK trilayer process; the fingers are never resized. Build this one to see the `JunctionTestPads` part and how a sweep is laid out as a grid. ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl.png :width: 100% :alt: chip_04_test_chip_tl as rebuilt on the Quantcore PDK chip_04_test_chip_tl as rebuilt on the Quantcore PDK ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/legacy/chip_04_test_chip_tl.ipynb` | | Source script | `components/python/chip_04_test_chip_TL.py` (QWri legacy, Quantcore internal) | | Chip | 7.5 × 7.5 mm die | | On the chip | 45 `testPad_Nb_TL` probe structures (9 columns × 5 rows) with column and row labels in nm | | Builds today | yes, rebuilt from its JSON on 2026-11-19 in 1.0 s (the notebook itself was not re-run) | ## Pictures ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl_legacy.png :width: 70% :alt: chip_04_test_chip_tl: the original legacy layout (render of the legacy GDS) chip_04_test_chip_tl: the original legacy layout (render of the legacy GDS) ``` ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl.png :width: 70% :alt: chip_04_test_chip_tl: the Quantcore rebuild chip_04_test_chip_tl: the Quantcore rebuild ``` ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl_sweep.png :width: 45% :alt: Three test pads in a row: each has two probe pads and a junction between the tips Three test pads in a row: each has two probe pads and a junction between the tips ``` ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl_tp_4_2.png :width: 45% :alt: One test pad: the two probe pads meet at a notch where the junction sits One test pad: the two probe pads meet at a notch where the junction sits ``` ```{figure} ../../images/designs/legacy/chip_04_test_chip_tl_jj.png :width: 45% :alt: The junction (20 µm box): bottom finger (magenta), top bent finger (grey) and their overlap (white) The junction (20 µm box): bottom finger (magenta), top bent finger (grey) and their overlap (white) ``` ## LOM estimates The notebook's saved outputs hold no LOM run (its LOM cells were not executed), so there are no estimates to show here and none were computed for this page. It is a test chip, so the build spec gives junction values from the PDK process instead. ## Build spec The rest of this page is the detailed spec the notebook was built from: components, positions, parameters and what changed from the legacy script. Source: `components/python/chip_04_test_chip_TL.py` (`create_test_chip()`, writes `chip_04_TL_testJJ_1.0.gds`). Legacy QWri library, Quantcore internal. Notebook `examples/designs/legacy/chip_04_test_chip_tl.ipynb`. ### Changes made in the rebuild - Junctions: the drawn test-pad sweep valued on the PDK junction rule (Nb trilayer, Δ = 1.4 meV, I_c·R_n = πΔ/2e = 2.20 mV, R_n 40–50 kΩ, qubits 4–8 GHz; PDK process `get_pdk().junction`: R_n·A 13.5 kΩ·µm², C_J 50 fF/µm², both assumed by the PDK). - The notebook's JSON was rebuilt from its layout cell. The notebook has not been re-run, so its outputs are cleared and its PNGs may be out of date. What it is: a junction-size calibration chip: a 9 × 5 array of `testPad_Nb_TL` probe structures on a 7.5 × 7.5 mm die centred on (0, 0) → Designer (x + 3750, y + 3750). PDK v2 die frame (replaces the corner `Marker`s, rot 1/2/3/0, and the layer-10 outline with its 500 µm boxes at (±3350, ±3350)). No qubits, resonators or feedline. Imports `junction_creator` (missing from the library) but never calls it. Builds: yes. The text labels are not drawn. ### Components (legacy frame) | instance | legacy cell → catalog ref | params | at | notes | |---|---|---|---|---| | TP_i_j (45) | `testPad_Nb_TL.create_testPad(bf / 0.2, tf)` (`TEST_TL`) → `JunctionTestPads(**legacy_test_pad_params("testPad_Nb_TL", bf / 0.2, tf))` | pads 500 × 300, middle 300, window 600 × 900; straight finger `0.2·size + 0.06` = bf + 0.06 µm, bent finger tf; no HSQ | x = −2800 … 2800 (700 pitch, `np.arange(−box/2 + 950, box/2 − 800, 700)`), y = 2400 … −2400 (−1200 pitch) | `d.array("TP", ..., shape=(9, 5), vary=...)`; column i: bf = 0.4, 0.5, 0.55, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0; row j: tf = 0.4, 0.5, 0.6, 0.7, 0.8 | | labels | `TextGenerator`: "BOT" (200 µm) at (−200, 3400); inverted bf·1000 at (x − 190, 3050); inverted tf·1000 rot 90° at (−3300, y − 190) | MISSING (text cell) | | | ### Routes, test pads, LOM No routes. The test pads have no ports, so the LOM netlist is empty. "LOM simulation" = the junction table (area = (bf + 0.06) × tf; L_J, R_n from an assumed Jc, to be confirmed). No sim groups / FEM jobs. ### Keep-outs None: the outermost windows end at |x| = 3100, |y| = 2850, inside the design area and clear of the corner marker areas.