# Sixteen junction pads (chip_11f) A junction test chip: 16 probe-pad pairs in a 4 × 4 array, each with one small trilayer junction (0.2 × 0.6 µm) in the gap between its two pads. Measuring the resistance across each pair tests how uniform the junctions come out. The legacy script only placed junctions at coordinates read from a CSV file that is now lost, and drew no pads. So the pad pairs, their count and pitch are an assumption: each junction lands in the centre of its pair, overlapping each pad by 1 µm. It comes from Quantcore's QWri script `chip_11f_JJplacer.py` (internal). The rebuild reconstructs a lost layout: it puts the pairs on the PDK die with the PDK cheese band and flags the junctions as higher-resistance than the PDK nominal (112.5 kΩ). Build it to see how a script that only places cells at coordinates becomes a design with explicit sites. ```{image} ../../images/designs/legacy/chip_11f_jjplacer.png :alt: The whole chip_11f_jjplacer chip rebuilt on the Quantcore PDK :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/legacy/chip_11f_jjplacer.ipynb` (design JSON `chip_11f_jjplacer.json`) | | Source | Quantcore legacy QWri script `components/python/chip_11f_JJplacer.py` (internal); the coordinate file is lost, so the layout is rebuilt on assumed sites | | Chip | 7.5 × 7.5 mm Quantcore die, sapphire | | On the chip | 16 `ProbePadPair` (4 × 4, 1000 × 1500 µm pitch), each with one `Trilayer Junction Compact` | | Builds today | yes, rebuilt from its JSON on 2026-11-19 in 0.9 s (the notebook itself was not re-run) | ## Pictures ```{figure} ../../images/designs/legacy/chip_11f_jjplacer.png :alt: Rebuilt chip_11f_jjplacer :width: 100% The rebuild: 16 probe-pad pairs in a 4 × 4 array. ``` ```{figure} ../../images/designs/legacy/chip_11f_jjplacer_jx1.png :alt: Zoom on one pad pair :width: 45% One pad pair, with the junction at the centre where the two pads meet; dots are the cheese band. ``` ```{figure} ../../images/designs/legacy/chip_11f_jjplacer_jjclose.png :alt: Zoom on the junction :width: 45% The junction in the gap between the two pad leads (a 20 µm view). ``` ## LOM estimates The notebook has no saved LOM output. The chip has no qubit or resonator, so its LOM netlist is empty. ## Build spec The rest of this page is the detailed spec the notebook was built from: every component, the changes made while rebuilding, and the notes. Source: `components/python/chip_11f_JJplacer.py` (module-level script, no function; writes `chip_11m_placed.gds` with one cell `JJx`). Legacy QWri library, Quantcore internal. ### Changes made in the rebuild - Built (the coordinates file is lost; the requirement was "the junctions land in the centre of the top and bottom pads, the part that is deleted, with 1 µm overlap"): notebook `examples/designs/legacy/chip_11f_jjplacer.ipynb`. 16 pad pairs (4 × 4, pitch 1000 × 1500 µm) of two facing `TaperedPad`s (500 × 350 µm pads, 95 µm taper to 5 µm leads, 600 × 500 µm windows meeting at the pair centre: lead tips at ±5 µm), taken from chip_11m's commented-out probe pads; one JX_500 (`TrilayerJunctionCompact` 0.2 × 0.6 µm, `clearer=True` = the legacy centre cut-out) per pair, its 12 µm window centred on the gap so it overlaps each lead by 1 µm. Assumed (to be confirmed): site count / pitch, the lead taper, both pads on M1 (the legacy drew the bottom pad on 3/0). PDK junction rule (Nb trilayer, Δ = 1.4 meV, I_c·R_n = πΔ/2e = 2.20 mV, R_n 40–50 kΩ, qubits 4–8 GHz; PDK process `get_pdk().junction`: R_n·A 13.5 kΩ·µm², C_J 50 fF/µm², both assumed by the PDK): 112.5 kΩ each. - The notebook's JSON was rebuilt from its layout cell. The notebook has not been re-run, so its outputs are cleared and its PNGs may be out of date. What it is: a junction-layer placer: it reads `x, y, f` columns from `D:\Designs\ScriptedDesigns\junctions\jj_coordinates.csv` (`np.genfromtxt(..., delimiter=',', unpack=True)`) and, for every row, inserts chip_11m's `JX_500` cell (read from `chip_11m_jnc1.0_0.6.gds`, i.e. `create_testPad(1.0, 0.6)`: straight finger 0.2 µm, bent finger 0.6 µm) at `Trans(f, False, x, y)` (rotation `f · 90°`, µm). It draws nothing else: no die, no pads, no markers. The output is the junction layers (2/0, 4/0, HSQ 500/0) of some pre-patterned chip whose pads are not in the library. It also imports `junction_creator_HSQ`, `squid_creator_HSQ` and `chip_11m_TestJJ16x_pads` without calling them; `flip = [1]` is unused. Reproducing the original: not possible. Every cell resolves (`TrilayerJunctionCompact(finger_width=0.2, second_finger_width=0.6)`), but the placement data is missing: `jj_coordinates.csv` is neither in `components/` nor anywhere in the repository, so the number, positions and rotations of the junctions are unknown. Input needed: the CSV (and, if it exists, the pad chip it belongs to). ### Components (legacy frame) | instance | legacy cell → catalog ref | params | at | notes | |---|---|---|---|---| | JX_k (one per CSV row) | `JX_500` from `chip_11m_jnc1.0_0.6.gds` → `TrilayerJunctionCompact(finger_width=0.2, second_finger_width=0.6)` | as chip_11m, size 1.0 | `(x_k, y_k)`, rot `90° · f_k`; the cell origin is the window's lower edge, so `at = (x_k, y_k) + R(f_k)·(0, −6)` | coordinates from the CSV (missing) | ### How it will be built (once the CSV is there) PDK die frame if the coordinates are on a 7.5 mm die centred on (0, 0) (shift +3750, +3750), else the frame the pad chip uses; one `d.add(f"JX_{k}", "TrilayerJunctionCompact", **L.place(x, y, f), …)` per row with the 6 µm origin offset rotated by `f`; junction table (one size, L_J ≈ 2.74 nH, R_n ≈ 18.3 kΩ at the assumed Jc = 1 µA/µm²); the legacy reference through `tests/legacy_ref` (`chip_11m_TestJJ16x_pads.create_testPad(1.0, 0.6)` per row) with the junction-layer XOR (`_legacy_b.junction_xor`). ### LOM One JJ branch per junction (`J_JX_k`: `JX_k.j` to ground); the `common` ports land on the missing pads. No sim groups.