# Nine coupled Xmons (design 12) A coupled-qubit test chip. A 20/12 µm feedline crosses the die and nine λ/4 readout resonators hang off it, each ending at one of nine Xmon qubits (four above the feedline, five below). The chip tests two things: a direct coupling between two neighbouring qubits (Q1 and Q2, arm tips facing each other) and a tunable coupler, where a flux-tunable qubit (Q8) sits between two others (Q5 and Q6). Each qubit has its own 50 Ω launchpad for a flux line or a drive line. It comes from Quantcore's earlier Qiskit Metal design notebook `12.0 Coupled_chip_layout.ipynb` (internal). The rebuild keeps every Metal component through the `metal:` wrapper and moves all launchpads to the 100 µm pad rule, adds the PDK die frame (device ID `D12`) and cheese band, and swaps the junction footprints for PDK junctions and SQUIDs (45 kΩ). Build it to see a large Metal-style layout with routed flux and drive lines. ```{image} ../../images/designs/legacy/d12_coupled_chip.png :alt: The whole d12_coupled_chip chip rebuilt on the Quantcore PDK :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/legacy/d12_coupled_chip.ipynb` (design JSON `d12_coupled_chip.json`) | | Source | Quantcore's earlier Qiskit Metal notebook `components/python/12.0 Coupled_chip_layout.ipynb` (internal) | | Chip | 7.5 × 7.5 mm Quantcore die, sapphire, feedline 20 / 12 µm, resonators 10 / 6 µm | | On the chip | 9 `TransmonCross` Xmons (5 with flux lines) · 9 λ/4 readouts · 1 feedline · 12 launchpads · 20 routes | | Builds today | yes, rebuilt from its JSON on 2026-11-19 in 4.6 s (the notebook itself was not re-run) | ## Pictures ```{figure} ../../images/designs/legacy/d12_coupled_chip_legacy.png :alt: Legacy d12 design in the Qiskit Metal GUI :width: 100% The original design as drawn in the Qiskit Metal GUI (screenshot of the legacy notebook). ``` ```{figure} ../../images/designs/legacy/d12_coupled_chip.png :alt: Rebuilt d12_coupled_chip :width: 100% The rebuild on the Quantcore PDK, with the die frame and cheese band. ``` ```{figure} ../../images/designs/legacy/d12_coupled_chip_q0.png :alt: Zoom on qubit Q0 :width: 45% Q0: an Xmon cross with its resonator's claw below and the junction at the top. ``` ```{figure} ../../images/designs/legacy/d12_coupled_chip_q8.png :alt: Zoom on qubit Q8 :width: 45% Q8, the tunable coupler: a flux line enters below, and neighbouring qubit arms face it on both sides. ``` ```{figure} ../../images/designs/legacy/d12_coupled_chip_lp_tb_00.png :alt: Zoom on a launchpad :width: 45% One launchpad: a bond pad tapering into a 20 µm line that is routed to a qubit. ``` ## LOM estimates The notebook's saved LOM output (QuCat normal modes). Readout frequencies have no targets in this design. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q0+R0 | Q0 | 5.0591 | -196.9 | R0 | 4.9357 | 0.411 | 64.7 | | Q1+R1 | Q1 | 5.0411 | -146 | R1 | 4.4242 | 0.153 | -1.64 | | Q2+R2 | Q2 | 5.0401 | -145.2 | R2 | 4.5015 | 0.161 | -2.37 | | Q3+R3 | Q3 | 5.0325 | -146 | R3 | 5.7585 | 0.323 | -1.59 | | Q4+R4 | Q4 | 5.0331 | -146.4 | R4 | 5.937 | 0.354 | -1.16 | | Q5+R5 | Q5 | 5.0248 | -135.7 | R5 | 5.226 | 0.165 | -11 | | Q6+R6 | Q6 | 5.0277 | -139.6 | R6 | 5.283 | 0.216 | -7.82 | | Q7+R7 | Q7 | 5.046 | -124.6 | R7 | 4.8085 | 0.192 | -22.7 | | Q8+R8 | Q8 | 5.0352 | -146.8 | R8 | 6.1513 | 0.221 | -0.86 | The coupled groups: the direct pair Q1-Q2 splits into modes at 5.1220 and 5.1828 GHz (splitting 60.7 MHz); the tunable-coupler triple Q5-Q8-Q6 has modes at 5.0932, 5.1529 and 5.1836 GHz (splitting 90.3 MHz). Q0 is hybridised with its resonator. These numbers are the notebook's saved output, not re-run for this page. They are lumped-model estimates (component formulas and calibration), not FEM results; see [the LOM page](../../library/lom.md) for how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from: every component, the changes made while rebuilding, and the notes. Source: the legacy design notebook `components/python/12.0 Coupled_chip_layout.ipynb` (Quantum Metal, `DesignPlanar`), Quantcore internal. Rebuild: `examples/designs/legacy/d12_coupled_chip.ipynb` (+ `.json`, PNGs); tables and the Metal reference in `examples/designs/legacy/_legacy_b.py` (`D12_*`, `d12_meander_x`, `d12_metal_reference`). ### Changes made in the rebuild - Junctions: Metal footprints → PDK cells via the Metal wrapper (`junction_type`: `Quantcore Junction` on the six fixed Xmons, `Quantcore Squid` on the three flux-line Xmons), sized by the PDK junction rule (Nb trilayer, Δ = 1.4 meV, I_c·R_n = πΔ/2e = 2.20 mV, R_n 40–50 kΩ, qubits 4–8 GHz; PDK process `get_pdk().junction`: R_n·A 13.5 kΩ·µm², C_J 50 fF/µm², both assumed by the PDK) at R_n = 45 kΩ per qubit (L_J 6.73 nH, C_J 15 fF; was assumed 10 nH / 2 fF). LOM: f_q ≈ 5.03–5.08 GHz; Q0/R0 hybridised, Q7/R7 close. - Readout lengths: simulated without claws. - The notebook's JSON was rebuilt from its layout cell. The notebook has not been re-run, so its outputs are cleared and its PNGs may be out of date. What it is: a coupled-qubit test chip. One 20/12 µm feedline across the die centre (y = 0) between two launchpads, nine Xmons (`TransmonCrossFL`) with λ/4 readout resonators (10/6 µm) shorted 36 µm from the feedline centre-line (3 µm ground strip). Four qubits above the line (y = +2 mm), five below (y = −2 mm): - Q1–Q2 (x = ∓250 µm): the direct coupler pair, cross-arm tips facing across a 20 µm ground strip; - Q5–Q8–Q6 (x = −500, 0, +500 µm): the tunable coupler: Q8 is a flux-tunable Xmon between Q5 and Q6 (20 µm ground strips), with its own readout R8; - Q0, Q3, Q4, Q7 (x = ±1700 µm): single qubits (single junction `JJ_grad`, no flux line) with a drive line. Q1, Q2, Q5, Q6, Q8 have a flux line (`make_fl=True`, SQUID `SQUID_grad`); Q0, Q2, Q3, Q4, Q7 have a capacitive drive pad (`bus_drive`, gap connector 30 µm from the arm). Ten 50 Ω flux/drive launchpads (400 × 300 µm, 10/5.75 µm trace): three on the top and bottom edges, two on each side. Lines are `RoutePathfinder`s. Die: 7.5 × 7.5 mm, 650 µm sapphire: the PDK v2 die frame. Coordinates are in the Designer frame (legacy + (3750, 3750) µm). Layers: 1/0 (negative mask), the Metal junction footprints on 2/0. Built; every Metal cell resolves, every port maps (24 LOM nodes, 5 flux controls). ### Components | instance | legacy cell | catalog ref | at (x, y) µm | rot | pads / options | legacy (x, y) µm | |---|---|---|---|---|---|---| | `P1_C` | `LaunchpadWirebondDriven` (lead 500) | `metal:LaunchpadWirebondDriven` | (6450, 3750) | 180 | 400 × 400, gap 240, taper 300, trace 20/12, **lead 20** | (2700, 0) | | `P2_C` | `LaunchpadWirebondDriven` (lead 500) | `metal:LaunchpadWirebondDriven` | (1050, 3750) | 0 | as P1_C | (−2700, 0) | | `LP_TB_00/01/02` | `LaunchpadWirebondDriven` | `metal:LaunchpadWirebondDriven` | (2450 / 3730 / 5050, 950) | 90 | 400 × 300, gap 195, taper 300, trace 10/5.75, lead 20 | (−1300 / −20 / 1300, −2800) | | `LP_TB_10/11/12` | `LaunchpadWirebondDriven` | `metal:LaunchpadWirebondDriven` | (2450 / 3730 / 5050, 6550) | 270 | as above | (…, 2800) | | `LP_LR_00/10` | `LaunchpadWirebondDriven` | `metal:LaunchpadWirebondDriven` | (950, 1750 / 5750) | 0 | as above | (−2800, ∓2000) | | `LP_LR_01/11` | `LaunchpadWirebondDriven` | `metal:LaunchpadWirebondDriven` | (6550, 1750 / 5750) | 180 | as above | (2800, ∓2000) | | `Q0` | `TransmonCrossFL` (make_fl=False) | `metal:TransmonCross` | (2050, 5750) | 180 | claw `a` + `bus_drive` (loc 180) | (−1700, 2000) | | `Q1` | `TransmonCrossFL` | `metal:TransmonCrossFL` | (3500, 5750) | 180 | claw `a` + `flux_line` | (−250, 2000) | | `Q2` | `TransmonCrossFL` | `metal:TransmonCrossFL` | (4000, 5750) | 180 | claw `a` + `bus_drive` (loc 0) + `flux_line` | (250, 2000) | | `Q3` | `TransmonCrossFL` (make_fl=False) | `metal:TransmonCross` | (5450, 5750) | 180 | claw `a` + `bus_drive` (loc 0) | (1700, 2000) | | `Q4` | `TransmonCrossFL` (make_fl=False) | `metal:TransmonCross` | (2050, 1750) | 0 | claw `a` + `bus_drive` (loc 0) | (−1700, −2000) | | `Q5` | `TransmonCrossFL` | `metal:TransmonCrossFL` | (3250, 1750) | 0 | claw `a` + `flux_line` | (−500, −2000) | | `Q6` | `TransmonCrossFL` | `metal:TransmonCrossFL` | (4250, 1750) | 0 | claw `a` + `flux_line` | (500, −2000) | | `Q7` | `TransmonCrossFL` (make_fl=False) | `metal:TransmonCross` | (5450, 1750) | 0 | claw `a` + `bus_drive` (loc 180) | (1700, −2000) | | `Q8` | `TransmonCrossFL` | `metal:TransmonCrossFL` | (3750, 1750) | 0 | claw `a` + `flux_line` | (0, −2000) | | – | `ShortToGround` (9×) | hanger `end="short"` | the short ends below | – | – | | All Xmons: cross_length 220, cross_width 50, cross_gap 20 µm; claw `a`: connector_type 0, location 90, claw 150/35/6 µm, ground_spacing 2, claw_cpw 10 × 100 µm; `bus_drive`: connector_type 1, ground_spacing 30, width 10, gap 6 µm; flux line `fl_options`: t_top 60, t_offset −20, t_inductive_gap 2, t_width 2, t_gap 6 µm. `TransmonCrossFL(make_fl=False)` draws exactly a `TransmonCross` (its `make` adds only the flux line), so those four use `metal:TransmonCross`, whose LOM has a single JJ instead of a SQUID. Junction values are not in the source (external `hsq_junction.gds` cells `JJ_grad` / `SQUID_grad`; the notes mention "smaller" and "bigger" junctions without values): Lj = 10 nH for all (the Metal default `hfss_inductance`), Cj 2 fF, assumed. ### Routes | route | from → to | type, length (µm) | hanger (s, length, side, ground_gap 3, direction) | coupler x-span (µm) | meander segment x (µm) | |---|---|---|---|---|---| | `cpw_main` | `P1_C.tie` → `P2_C.tie` | cpw 20/12, 5360 | – | – | travels −x at y = 3750 | | `R0` | `Q0.a` → hanger | meander 10/6, 5493 | 4894.05, 571.9, right, forward | [1250.0, 1821.9] | 1600.0 (= legacy axis) | | `R1` | `Q1.a` → hanger | 6262 | 3080.00, 400, right, backward | [3150, 3550] | 3350.0 (= axis) | | `R2` | `Q2.a` → hanger | 6140 | 2280.00, 400, right, forward | [3950, 4350] | 4150.0 (= axis) | | `R3` | `Q3.a` → hanger | 4638 | 880.00, 400, right, forward | [5350, 5750] | 5450 (claw x; axis 5561.1) | | `R4` | `Q4.a` → hanger | 4475 | 4480.00, 400, left, backward | [1750, 2150] | 2050 (claw x; axis 1933.8) | | `R5` | `Q5.a` → hanger | 5200 | 3780.00, 400, left, forward | [2450, 2850] | 2850 (coupler end; axis 2750) | | `R6` | `Q6.a` → hanger | 5132 | 1580.00, 400, left, backward | [4650, 5050] | 4650 (coupler end; axis 4700) | | `R7` | `Q7.a` → hanger | 5690 | 380.00, 400, left, backward | [5850, 6250] | 5850 (coupler end; axis 5950) | | `R8` | `Q8.a` → hanger | 4300 | 2730.00, 300, left, forward | [3550, 3850] | 3625 (axis 3700 pushed out) | | `FLX_Q5` | `LP_TB_00.tie` → `Q5.flux_line` | cpw 10/6 | – | – | corners (2450, 1371), (3230, 1371) | | `DRV_Q2` | `LP_TB_12.tie` → `Q2.bus_drive` | cpw 10/6 | – | – | corners (5050, 6150), (4426, 6150), (4426, 5750) (legacy anchor (1.0, 2.4) mm) | | `FLX_Q8` | `LP_TB_01.tie` → `Q8.flux_line` | cpw 10/6 | – | – | straight | | `FLX_Q6` | `LP_TB_02.tie` → `Q6.flux_line` | cpw 10/6 | – | – | corners (5050, 1371), (4230, 1371) | | `FLX_Q1` | `LP_TB_10.tie` → `Q1.flux_line` | cpw 10/6 | – | – | corners (2450, 6129), (3520, 6129) | | `FLX_Q2` | `LP_TB_11.tie` → `Q2.flux_line` | cpw 10/6 | – | – | corners (3730, 6129), (4020, 6129) | | `DRV_Q0/Q4/Q7/Q3` | `LP_LR_10/00/01/11.tie` → `Q*.bus_drive` | cpw 10/6, 754 each | – | – | straight | `s` is measured from the feedline start (`P1_C.tie`, x = 6430). The coupler lengths (start_straight 400 µm, 300 µm for R8, plus R0's first meander arm), the meander axes and the row heights are the legacy `RouteMeander`'s own polyline, from `d12_metal_reference()` (the legacy options rebuilt headless in Quantum Metal). Each resonator: claw → jog at the legacy last-row height → vertical meander segment → jog at the first-row height (y = ±186 legacy) → coupler → short; the vertical sits on the legacy meander axis unless a jog would be shorter than 2r + 5 µm. Resonator bends r = 60 µm (legacy fillet); the flux / drive lines keep the legacy pathfinder corners, which sit 100 µm from the pins, so they use r = 50 µm. ### Launchers, pads, test structures, markers, labels - Twelve Metal launchpads; `in` = the bond pad. All are connected. - No flux holes in the source (Metal's built-in cheesing is a GDS-export option, not drawn geometry). - PDK v2 die frame; device ID `D12`. Every edge centre holds a pad (`LP_TB_01` bottom, `LP_TB_11` top, `P2_C` left, `P1_C` right), so the automatic device ID slides along the bottom edge to the first free spot, (5500, 100)–(6200, 400): no keep-out violation. ### LOM node structure - `cpw_main`: one node with both feedline pads, 50 Ω at each end; nine HANGER κ elements to it. - Each qubit: island (C to ground, JJ or SQUID to ground) ─ C_g ─ claw node `Qi.a` (C to ground) ─ λ/4 `Ri` to ground (+ HANGER). - Drive: `Qi` ─ C_g (0.09 fF, gap connector) ─ `Qi.bus_drive` node = the drive pad's node with its 50 Ω port. - Flux: `Qi.flux_line` → `control:flux` (5 controls: Q1, Q2, Q5, Q6, Q8). - Couplings (declared, `d.couple`): Q1–Q2, Q5–Q8, Q8–Q6, 1.67 fF each (arm tips 60 µm apart across a 20 µm ground strip, CPS × 0.3 screening, rough); the `Q1_Q2` and `Q5_Q8_Q6` sim groups give the C-matrix. ### Targets None in the source (lengths only). ### Simplifications for a first rebuild - Meanders: a KQC `Meander` on one vertical segment (KQC picks the arm count) instead of Metal's `RouteMeander` (`segment_length` 0.6 mm, `spacing` 0.15 mm, `asymmetry`). Same lengths, couplers, shorts and claw positions; extents compared in the notebook. - Feedline pads: lead 20 µm; the rest of the legacy 500 µm lead is the feedline (same 20/12 CPW), so R0 and R7 can couple beside it as in the source. - Flux / drive line bends: r = 50 µm instead of 60 µm (same corner points). - Junctions: Metal junction footprints instead of the external `JJ_grad` / `SQUID_grad` cells.