# Filled qubit test chip (QPDK) The qubit test chip from gdsfactory's quantum-rf-pdk (QPDK), with a vortex-trap fill added to the ground plane: four double-pad transmons, each read out through its own λ/2 line hanging on a U-shaped probeline. The layout comes from QPDK's `filled_test_chip.py` (MIT) and is rebuilt on the Quantcore PDK: sapphire, Quantcore junctions and the QCT die frame. The rebuild is distributed under GPL-3.0. This notebook shows how a design is loaded read-only from another one, and how a foreign fill pattern becomes a PDK cheese rule (the original fill wins over the PDK band). ```{image} ../../images/designs/qpdk/filled_qubit_test_chip.png :alt: The whole filled_qubit_test_chip chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/qpdk/filled_qubit_test_chip.ipynb` (an older one-cell version is kept as `filled_qubit_test_chip.v1.ipynb`) | | Source | gdsfactory `quantum-rf-pdk` `qpdk/samples/filled_test_chip.py`, MIT (© 2024 gdsfactory) | | Chip | 7.5 × 7.5 mm Quantcore die, the source's 4250 × 6200 µm circuit centred in it, CPW 10 / 6 µm | | On the chip | 4 launchers · 4 double-pad transmons with trilayer SQUIDs · 4 λ/2 readouts · 1 probeline with 2 series IDCs · 2 flux lines · vortex-trap fill | | Builds today | yes (layout built on 2026-11-19 in 5 s) | ## How the notebook builds it ```{image} ../../images/designs/qpdk/filled_qubit_test_chip_steps.png :alt: The layout segments of filled_qubit_test_chip, one picture each :width: 100% ``` 1. **Load.** The qubit test chip's saved design is loaded read-only; only the name, the device ID and the cheese mode change. 2. **Pads.** The four launchers, 100 µm from the die edge (zoomed on the input pad). 3. **Probeline.** The two series IDCs and the U-shaped probeline between them. 4. **Qubits.** The double-pad transmons Q1 and Q2 with their SQUIDs (Q3 and Q4 mirror them). 5. **Readouts.** The λ/2 readouts that end in a coupled section on the probeline. 6. **Coupling.** None: the qubits only talk to their own readouts. 7. **Flux lines.** The open end of a flux line between two qubits, and the nine route lengths. 8. **Fill.** QPDK's 15 µm vortex holes on an 85 µm pitch, written as the chip's `cheese` rule; the design is saved. ## LOM estimates Numbers are from a run of this notebook on 2026-11-19 (Setup, Design, Check and the LOM cells, 7 s): QuCat normal modes with QuTiP dressed values. | group | qubit | f_q (GHz) | α (MHz) | resonator | f_r (GHz) | κ (MHz) | χ (MHz) | |---|---|---|---|---|---|---|---| | Q1R1 | Q1 | 5.763 | -196 | R1 | 11.87 | 0.638 | -1.36 | | Q2R2 | Q2 | 5.763 | -197 | R2 | 12.86 | 0.206 | -1.27 | | Q3R3 | Q3 | 5.764 | -197 | R3 | 16.16 | 0.4 | 1.61 | | Q4R4 | Q4 | 5.763 | -197 | R4 | 12.33 | 0.713 | -1.31 | ```{image} ../../images/designs/qpdk/filled_qubit_test_chip_lom.png :width: 80% :alt: LOM plot of filled_qubit_test_chip ``` These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. Source: [qpdk/samples/filled_test_chip.py](https://github.com/gdsfactory/quantum-rf-pdk/blob/main/qpdk/samples/filled_test_chip.py) (`filled_qubit_test_chip`) · licence MIT (gdsfactory 2024, verified) · Read on 2026-11-02. What it is: the [qubit_test_chip](qubit_test_chip.md) YAML loaded unchanged. A vortex-trapping hole fill is added to the ground plane, then a 100 µm etched chip-edge frame, and the result is converted to a negative (`apply_additive_metals`). The sample says it "roughly corresponds" to Tuokkola et al., *Methods to achieve near-millisecond coherence times in superconducting quantum circuits* (Nat. Commun. 2025). That paper's fab GDS is the Zenodo record noted in [community/tuokkola_near_ms_transmon](../community/tuokkola_near_ms_transmon.md). Image: `docs/_static/images/filled_qubit_test_chip.png`. Frame: `chip_edge(size=(xsize + 230, ysize + 200), width=100)` at (xmin − 100, ymin − 100) gives **box (0, 0, 4245, 6200)** (the spec uses 4250). **Designer = source + (100, 3100)**, the same frame as qubit_test_chip. The components are the same as in qubit_test_chip; the fill is written as the chip's `cheese` rule. The same file also defines `filled_flipmon_test_chip` and `filled_gatemon_test_chip` (same fill on those YAMLs). For a flip-chip YAML it also adds an M2 edge and an M2 fill (80 µm keep-out). ### Components Identical to [qubit_test_chip → Components](qubit_test_chip.md#components): PAD_IN, PAD_OUT, PAD_FT, PAD_FB, C_IN, C_OUT, Q1–Q4 (`DoublePads`), same positions in the same Designer frame. | instance | catalog ref | key params (units) | at (x, y) | rot | notes | |---|---|---|---|---|---| | (chip) | `Designer(..., chip={"with_grid": True})` | KQC ground grid | box (0, 0, 4250, 6200) | — | stands in for `fill_magnetic_vortices(rectangle_size=(15, 15), gap=70, stagger=2)` | | EDGE | chip frame | 100 µm etched border | box edge | — | QPDK `chip_edge(width=100, layer=M1_ETCH)`; the KQC chip frame/dicing edge covers it | QPDK fill: 15 × 15 µm etched squares on a 70 µm gap grid, every second row staggered. The fill routine's default keep-out keeps the squares clear of all drawn metal and etch. The rebuild matches it: hole 15 µm, pitch 85 µm, staggered rows. ### Routes Identical to [qubit_test_chip → Routes](qubit_test_chip.md#routes) (FL_IN, FL, FL_OUT, R1–R4 hangers, FLUX_T, FLUX_B). ### Launchers, pads, test structures, markers, labels 4 launchers, chip edge, ground fill. No markers or labels. ### LOM node structure Same as qubit_test_chip. The fill does not change the netlist. It only lowers ground-plane capacitance slightly, so run FEM extraction on the filled geometry. ### Targets None stated. The reference device (Tuokkola 2025) is a single fixed-frequency transmon chip; this sample keeps the 4-qubit QPDK layout and borrows only the fill and edge treatment. ### Simplifications for a first rebuild 1. Build qubit_test_chip first, then switch on `chip={"with_grid": True}`. 2. The exact QPDK fill geometry (15 µm squares, 70 µm gaps, stagger 2) is optional. The KQC grid is close enough for layout review; use the exact fill for FEM loss studies. ### Build The notebook `examples/designs/qpdk/filled_qubit_test_chip.ipynb` loads `qubit_test_chip.json` read-only. The fill is the chip's `cheese` rule with QPDK's 15 µm holes and 70 µm gap (the saved design has no KQC ground grid). ### Quantcore PDK rebuild The notebook is a Quantcore PDK rebuild, not a replica: the netlist, LOM and imported components are kept, the process is Quantcore's. Notebook: [`examples/designs/qpdk/filled_qubit_test_chip.ipynb`](../../../examples/designs/qpdk/filled_qubit_test_chip.ipynb). - **Chip:** the Quantcore die frame (L dicing markers 1000/0, 3 × 3 alignment grids 1001/0, chip boundary 100/0, device ID where an edge is free; any brand text is QCT), on the 7.5 × 7.5 mm Quantcore die; the source's 4.25 × 6.2 mm chip area is centred in it (the box comes with the loaded qubit test chip), so every coordinate stays the source's. The Quantcore frame replaces QPDK's 100 µm etched `chip_edge`. - **Stack:** sapphire 650 µm, εr 10.25 (the PDK default stack, used by the LOM estimates and every FEM export); QPDK's process is Al on Si (εr 11.45), so frequencies are not the QPDK ones. - **Junctions:** as in the [qubit test chip](qubit_test_chip.md) (loaded with it): Quantcore trilayer SQUIDs on the PDK rule (`_qpdk.JJ_PARAMS`): two 0.25 × 0.6 µm junctions (KQC's `junction_width` = the straight finger) → R_n 45 kΩ in parallel, L_J 6.73 nH at zero flux, C_J 15 fF; fingers on 2/0 + 4/0, spacer 50/0 with the 51–53/0 gradient (Nb Δ = 1.4 meV, R_n·A 13.5 kΩ·µm² and C_J 50 fF/µm² assumed). - **Kept:** the topology and every component with the source's parameters and positions, the readout / resonator lengths and coupled sections, the sim groups (the whole qubit test chip, loaded from its JSON).