# Resonator test chip (QPDK) Sixteen shorted λ/4 resonators on two straight probelines, eight per line, for measuring losses. The layout comes from QPDK's `resonator_test_chip.py` (MIT) and is rebuilt on the Quantcore PDK; the rebuild is GPL-3.0. The chip has no qubits. This notebook is an example of many hanger resonators on a line, resonators without a qubit (open ends instead), and a chip wider than the standard die. ```{image} ../../images/designs/qpdk/resonator_test_chip.png :alt: The whole resonator_test_chip chip as the v2 notebook builds it :width: 100% ``` ## At a glance | | | |---|---| | Notebook | `examples/designs/qpdk/resonator_test_chip.ipynb` (an older one-cell version is kept as `resonator_test_chip.v1.ipynb`) | | Source | gdsfactory `quantum-rf-pdk` `qpdk/samples/resonator_test_chip.py`, MIT (© 2024 gdsfactory) | | Chip | 9.2 × 4.3 mm (the source's size, not the 7.5 mm die), CPW 10 / 6 µm | | On the chip | 4 launchers · 2 probelines · 16 open ends · 16 λ/4 resonators (200 µm coupled section each) | | Builds today | yes (layout built on 2026-11-19 in 6 s) | ## How the notebook builds it ```{image} ../../images/designs/qpdk/resonator_test_chip_steps.png :alt: The layout segments of resonator_test_chip, one picture each :width: 100% ``` 1. **Die.** The 9.2 × 4.3 mm chip with the frame and the device ID. 2. **Bond pads.** Four launchers on the 100 µm pad rule. 3. **Probelines.** Two straight lines from launcher to launcher. 4. **Open ends.** Sixteen 6 µm open ends, where the resonators start (the chip has no qubits). 5. **Resonators.** Sixteen meandered λ/4 resonators, each ending in a shorted coupled section on its probeline. 6. **Coupling.** Only the hanger sections; nothing else couples them. 7. **Control lines.** None. 8. **Whole chip.** One sim group per probeline, centring, save. ## LOM estimates Numbers are from a run of this notebook on 2026-11-19 (Setup, Design, Check and the LOM cells, 74 s): QuCat normal modes with QuTiP dressed values. | mode | kind | f (GHz) | κ (MHz) | A (MHz) | participation | |---|---|---|---|---|---| | RB8 | resonator | 6.28 | 0.102 | 0 | RB8 1.00 | | RB7 | resonator | 6.541 | 0.116 | 0 | RB7 1.00 | | RB6 | resonator | 6.824 | 0.131 | 0 | RB6 1.00 | | RB5 | resonator | 7.133 | 0.15 | 0 | RB5 1.00 | | RB4 | resonator | 7.472 | 0.172 | 0 | RB4 1.00 | | RB3 | resonator | 7.844 | 0.199 | 0 | RB3 1.00 | | RB2 | resonator | 8.255 | 0.232 | 0 | RB2 1.00 | | RB1 | resonator | 8.711 | 0.272 | 0 | RB1 1.00 | | mode | kind | f (GHz) | κ (MHz) | A (MHz) | participation | |---|---|---|---|---|---| | RT8 | resonator | 6.158 | 0.0964 | 0 | RT8 1.00 | | RT7 | resonator | 6.408 | 0.109 | 0 | RT7 1.00 | | RT6 | resonator | 6.68 | 0.123 | 0 | RT6 1.00 | | RT5 | resonator | 6.976 | 0.14 | 0 | RT5 1.00 | | RT4 | resonator | 7.299 | 0.16 | 0 | RT4 1.00 | | RT3 | resonator | 7.653 | 0.185 | 0 | RT3 1.00 | | RT2 | resonator | 8.044 | 0.215 | 0 | RT2 1.00 | | RT1 | resonator | 8.477 | 0.251 | 0 | RT1 1.00 | ```{image} ../../images/designs/qpdk/resonator_test_chip_lom.png :width: 80% :alt: LOM plot of resonator_test_chip ``` These are lumped-model estimates (component formulas and calibration), not FEM results. [The LOM page](../../library/lom.md) says how far to trust them. ## Build spec The rest of this page is the detailed spec the notebook was built from, with every component, port, route and length. Source: [qpdk/samples/resonator_test_chip.py](https://github.com/gdsfactory/quantum-rf-pdk/blob/main/qpdk/samples/resonator_test_chip.py) (`resonator_test_chip_python`, `filled_resonator_test_chip`) and its frozen netlist `resonator_test_chip_yaml.pic.yml` · licence MIT (verified) · Read on 2026-11-02. Image `docs/_static/images/resonator_test_chip.png`. What it is: two straight west→east probelines, 1000 µm apart, each with two launchers. Each carries 8 shorted λ/4 CPW resonators (`quarter_wave_resonator_coupled`, 6 meanders, 200 µm coupled section). The bottom-line resonators hang below the line and the top-line ones (mirrored) sit above it. The README says "systematically varied CPW widths and gaps", but both the code and the YAML use one cross-section (10/6 µm) and vary only length. It serves as a loss and kinetic-inductance chip. Frame: source x 0…9000, y about −1250…+2250 (meander height ≈ 1250 µm, read from the image). The filled version's chip edge is (xsize + 200, ysize + 800) at (xmin − 100, ymin − 400), so **box (0, 0, 9200, 4300)** and **Designer = source + (100, 1650)**. Si, M1 negative. The chip needs only `BondPad` and routes: the resonators are plain λ/4 hangers, which the route model covers directly. ### Components | instance | catalog ref | key params | at (x, y) Designer | rot | notes | |---|---|---|---|---|---| | PW_B | `BondPad` | default | (100, 1650) | 270 (faces east) | source probe_west_bot (0, 0) | | PE_B | `BondPad` | default | (9100, 1650) | 90 (faces west) | probe_east_bot (9000, 0), mirrored | | PW_T | `BondPad` | default | (100, 2650) | 270 | probe_west_top (0, 1000) | | PE_T | `BondPad` | default | (9100, 2650) | 90 | probe_east_top (9000, 1000) | No qubits. The chip is resonators only. ### Routes Probelines are straight. QPDK adds a small S-bend at each launcher because the probeline sits 26 µm off the launcher axis; we skip it. Coupled section in the YAML: coupling_gap 16 µm edge-to-edge (centre spacing 26 µm), so **ground_gap = 4 µm**. The Python default is coupling_gap 4 µm, which merges both CPW gaps (no ground strip). Use the YAML value. Resonator k (k = 1…8) has its 200 µm coupled section at source x 1000k…1000k + 200, so the Designer centre is x = 1000k + 200 and **s_k = 1000k − 200** from the pad port (≈ x 400). The shorted end is the west end of the coupled section, then the line meanders away. Use **direction backward** (the route arrives from the east end and the short lands at the west end). | route | from → to | type, length | hanger (s, length, side, ground_gap, direction) | notes | |---|---|---|---|---| | FL_B | PW_B.a → PE_B.a | cpw | straight y 1650 | | | FL_T | PW_T.a → PE_T.a | cpw | straight y 2650 | | | RB1…RB8 | free_end (meander start) → FL_B.hanger | meander 3600, 3800, 4000, 4200, 4400, 4600, 4800, 5000 | s 800, 1800, …, 7800; 200; **right**; 4; backward | resonators below FL_B | | RT1…RT8 | free_end → FL_T.hanger | meander 3700, 3900, 4100, 4300, 4500, 4700, 4900, 5100 | s 800, 1800, …, 7800; 200; **left**; 4; backward | resonators above FL_T | Lengths come from `np.linspace(0.9·4000, 1.275·4000, 16)` (100 µm steps), interleaved: even indices on the bottom, odd on the top. The open end is a free end: start each resonator route at `Designer.free_end(at, dir, term=6)`, ≈1250 µm from the line on its side, at x ≈ 1000k + 100. Let the meander fill the 1250 × ~600 µm cell. ### Launchers, pads, test structures, markers, labels 4 launchers. The filled version adds a 100 µm chip edge and 15 µm vortex squares (70 µm gap, stagger 2), which maps to `chip={"with_grid": True}`. ### LOM node structure FL_B and FL_T: one conductor each, two 50 Ω ports. Each RBk/RTk is an independent λ/4 resonator with coupled-line κ to its probeline. No qubits, buses or control lines. ### Targets None stated in the code. λ/4 on Si (ε_eff ≈ 6.2): f ≈ 3.0 GHz·mm / L, so 8.3 GHz (3600) down to 5.9 GHz (5100), about 0.1–0.2 GHz apart. The README shows a SAX sweep from 4 to 10 GHz resolving all eight notches per line. ### Simplifications for a first rebuild 1. No S-bends, no fill. Each resonator is `d.route(name, Designer.free_end(at, dir, term=6), FL.hanger(...), meander=L)`. The schema allows a free end as `from` and a hanger only as `to`. 2. A CPW width/gap sweep (as the README describes) can be added later by giving each resonator route its own `a`/`b`. ### Build The notebook is `examples/designs/qpdk/resonator_test_chip.ipynb`. Each resonator starts at a 6 µm `CpweOpenEnd` (a route from a free end to a hanger has no LOM start node). Resonator routes use r = 75 µm so 6 meanders fit in 1250 µm. ### Quantcore PDK rebuild The notebook is a Quantcore PDK rebuild, not a replica: the netlist, LOM and imported components are kept, the process is Quantcore's. Notebook: [`examples/designs/qpdk/resonator_test_chip.ipynb`](../../../examples/designs/qpdk/resonator_test_chip.ipynb). - **Chip:** the Quantcore die frame (L dicing markers 1000/0, 3 × 3 alignment grids 1001/0, chip boundary 100/0, device ID where an edge is free; any brand text is QCT), drawn on the source's 9.2 × 4.3 mm chip (the design does not fit the 7.5 mm die); no KQC chip frame. - **Stack:** sapphire 650 µm, εr 10.25 (the PDK default stack, used by the LOM estimates and every FEM export); QPDK's process is Al on Si (εr 11.45), so frequencies are not the QPDK ones. - **Junctions:** none on this chip (resonators only). - **Kept:** the topology and every component with the source's parameters and positions, the readout / resonator lengths and coupled sections, the sim groups (the 16 lengths 3600–5100 µm, the 1000 µm pitch, 6 meanders).