# FAQ These pages answer the questions a newcomer meets while installing, drawing, checking, simulating and tuning a chip with Quantcore circuits. Each entry is a short answer with the command or setting, and a link to the page that explains more. If your question is not here, start from the [home page](../index.md) or the [status](../overview/status.md) page, which lists what is built and what is not. | Subsection | Questions about | |---|---| | [Install and environments](install.md) | the conda envs, the upstream libraries, files git must not delete, finding AEDT and KLayout | | [KLayout and the plugin](klayout-plugin.md) | installing the plugin, placing parts, rotation, route handles, dialogs, settings, the log | | [Components and pins](components.md) | the three component libraries, pins, qubit junction values, hangers and merges, your own component | | [Routing and DRC](routing-drc.md) | meander length, failed routes, crossings, errors against design warnings | | [PDK and fab](pdk-fab.md) | layers, die frame, the 100 µm pad rule, keep-outs, cheese, corner rounding, device ID | | [The LOM](lom.md) | what the lumped model is, what it estimates, how far to trust it, why it runs on the whole chip | | [Simulation](simulation.md) | AEDT versions and modes, Q3D against eigenmode against driven, sim groups, fast settings, memory | | [Results and feedback](results-feedback.md) | `results.json`, filling the LOM, targets, proposing the next revision | | [Notebooks](notebooks.md) | tutorials against design notebooks, `.v1` copies, the switch cell, saved outputs | | [Building these docs](docs.md) | the docs environment, fast builds, hosting | ```{toctree} :maxdepth: 1 :hidden: install klayout-plugin components routing-drc pdk-fab lom simulation results-feedback notebooks docs ```