quantcore_circuits.cards ======================== .. py:module:: quantcore_circuits.cards .. autoapi-nested-parse:: Parameter cards, chip elements and the process summary for the dashboard (``State.sections`` / ``cards`` / ``summary`` / ``elements``). Every number the loop produces gets a card: what it is, its value (chosen estimator / FEM / estimate), where it comes from (dependency chips pointing at the card they come from), the target or design value, the estimator range and the formula. Cards are organised by chip **element** so a chip with any number of qubits reads the same way: * ``elements`` — one entry per qubit, readout resonator, bus, coupler, feedline and port, with its key parameters (value / unit / status / target, the card that explains it) and its links (which resonator reads which qubit, which feedline it hangs off, which pad biases it). The dashboard's chip overview table is built from this list. * every card carries ``element`` (``"Q1"``, ``"R1"``, … or ``"chip"`` for process / simulation / jobs / feedback); coupling cards also carry ``partner`` (element ``"Q1"``, partner ``"R1"``), so they show under that pair. Works on LOM-only analyses (layout estimates, no FEM job) and on FEM-filled ones, for N transmon–resonator pairs. Attributes ---------- .. autoapisummary:: quantcore_circuits.cards.CHIP Functions --------- .. autoapisummary:: quantcore_circuits.cards.build Module Contents --------------- .. py:function:: build(design, an, proposal=None, jobs=None) -> dict ``{"sections", "cards", "summary", "elements"}`` from an :class:`~quantcore_circuits.loop.Analysis`. .. py:data:: CHIP :value: 'chip'