AlignmentMarkers

E-beam alignment squares at the four chip corners (legacy draw.marker_align); origin = chip lower-left.

Source: Quantcore. Category: marker. Module: quantcore_circuits.layouts.others.markers.

See also the catalog.

Pins

Pins of AlignmentMarkers

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

chip_width

7500

μm

Chip width

size

5

μm

Square size

marker_layer

"marker_1"

–

Layer: qcc name (marker_0..3, chip_boundary, …) or KQC name (base_metal_gap_wo_grid = legacy etch)

chip_height

7500

μm

Chip height

pitch

100

μm

Square pitch in a group

inset

150

μm

Inset of the lower-left group from the chip corner

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "AlignmentMarkers", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components AlignmentMarkers lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. chip-sized marker set (7350 um); fits a 7500 um chip.