quantcore_circuits.layouts.qubits.legacy_transmon

Two-pad transmon ported from the QWri Transmon PCell.

The legacy cell only has a positive drawing (metal on legacy layer 1/0): two pad_thickness × pad_height pads facing each other across gap (the junction gap), each with a 10 µm lead of width 10 µm on the outside. Here the metal goes to base_metal_addition (metal wins over gaps, so the cell also works inside another element’s gap) and, with pocket_margin > 0, the cell etches its own pocket: from lead end to lead end in x and pocket_margin beyond the pads in y, so the leads end on the pocket edge where the ports are.

Ports (outward): left (−x) and right (+x) at the lead ends, CPW width a (the legacy read-only path_width = 10 µm). The junction spans the gap: refpoints port_squid_a (left pad edge) / port_squid_b (right pad edge) for the simulation builder’s junction port.

Junction (design decisions #6 / #21): junction_type "No Squid" (default, as the legacy cell: nothing drawn, the refpoints mark the gap) or a trilayer cell — "Quantcore Junction" / "Quantcore Squid" (PDK junctions) or "Trilayer Junction" / "Trilayer Squid" — placed across the pad gap (window = the gap between the pad faces, ≤ 32 µm wide, CLEARER on; place_trilayer()), sized by junction_params ({"lj_nH": …} on the PDK rule, or explicit finger widths). "Sim" (set by simulation builds) draws nothing, like "No Squid".

Classes

TwoPadTransmon

Floating two-pad transmon (legacy Transmon); ports left / right at the lead ends.

Functions

two_pad_metal(dbu, pad_thickness, pad_height, gap, ...)

Legacy Transmon.produce_impl (= Coupler.produce_impl) metal, in dbu.

Module Contents

class quantcore_circuits.layouts.qubits.legacy_transmon.TwoPadTransmon

Bases: kqcircuits.elements.element.Element

Floating two-pad transmon (legacy Transmon); ports left / right at the lead ends.

Like the legacy Transmon.lym it draws only the pads on 1/0 and no junction (no 2/0, 4/0 or 50/0): the refpoints port_squid_a / port_squid_b mark the junction gap, where a junction cell (e.g. Trilayer Junction) must be placed for fab. Its LOM model assumes that junction.

build()
classmethod qcc_params(params: dict) → dict

design.json params → PCell params: junction_params dict → JSON (validated).

gap
junction_params
junction_type
lead_length
pad_height
pad_thickness
pocket_margin
qcc_category = 'qubit'
qcc_junction = True
quantcore_circuits.layouts.qubits.legacy_transmon.two_pad_metal(dbu, pad_thickness, pad_height, gap, path_width, lead_length=10.0)

Legacy Transmon.produce_impl (= Coupler.produce_impl) metal, in dbu.