HyperbolicVertexCoupler¶
q-pin capacitive disk coupler at a hyperbolic-lattice vertex (QPDK hyperbolic_vertex_coupler).
Source: Quantcore. Category: coupler. Module: quantcore_circuits.layouts.others.qpdk_cells.
See also the catalog.
Pins¶

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.
pin |
x (µm) |
y (µm) |
direction (°) |
a (µm) |
b (µm) |
purpose |
|---|---|---|---|---|---|---|
|
60 |
0 |
0 |
10 |
6 |
LOM node |
|
-30 |
51.962 |
120 |
10 |
6 |
LOM node |
|
-30 |
-51.962 |
240 |
10 |
6 |
LOM node |
a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).
Parameters¶
name |
default |
unit |
description |
|---|---|---|---|
|
|
μm |
Width of center conductor |
|
|
μm |
Width of gap |
|
|
μm |
Turn radius |
|
|
μm |
Disk radius |
|
|
μm |
Radial gap between pins |
|
|
μm |
Disk to ground clearance |
|
|
μm |
CPW lead beyond the disk |
|
|
– |
Number of pins |
|
|
° |
Direction of pin 0 |
Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.
LOM model¶
The cell contributes to the lumped model:
branch |
type |
nodes |
value (estimate at defaults) |
|---|---|---|---|
|
C |
o1 – gnd |
estimate=14, unit=fF, estimate_source=rough: pin arc (1/3 of a r 40 disk edge) + lead, estimate_kind=rough, uncertainty=±50% |
|
C |
o2 – gnd |
estimate=14, unit=fF, estimate_source=rough: pin arc (1/3 of a r 40 disk edge) + lead, estimate_kind=rough, uncertainty=±50% |
|
C |
o3 – gnd |
estimate=14, unit=fF, estimate_source=rough: pin arc (1/3 of a r 40 disk edge) + lead, estimate_kind=rough, uncertainty=±50% |
|
C |
o1 – o2 |
estimate=5.7, unit=fF, estimate_source=rough: radial edges (40 µm) across the 4 µm pin gap (CPS), estimate_kind=rough, uncertainty=±50% |
|
C |
o2 – o3 |
estimate=5.7, unit=fF, estimate_source=rough: radial edges (40 µm) across the 4 µm pin gap (CPS), estimate_kind=rough, uncertainty=±50% |
|
C |
o3 – o1 |
estimate=5.7, unit=fF, estimate_source=rough: radial edges (40 µm) across the 4 µm pin gap (CPS), estimate_kind=rough, uncertainty=±50% |
Nodes: o1, o2, o3.
Simulation export notes¶
ctx: scratch-context routing fallback (not an export issue) (status: context)
How to use¶
In Python:
from quantcore_circuits.designer import Designer
d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "HyperbolicVertexCoupler", at=(3750, 3750), a=10) # parameters: see the table above
d.add("PAD", "BondPad", at=(1125, 3750), rot=270) # a launcher to connect to
d.route("L1", "PAD.a", "U1.o1") # a CPW from the pad to the pin
Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components HyperbolicVertexCoupler lists the pins; add --schema for the parameters.
In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.
GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect ok, build ok.