ManhattanSingleJunction

The PCell declaration for a Manhattan style single junction.

Source: KQC (KQCircuits). Category: junction. Module: kqcircuits.junctions.manhattan_single_junction.

Warning

Legacy cell. KQC shadow-evaporation single junction (2/0 footprint, not the Quantcore trilayer process); unused. Use QuantcoreJunction

See also the catalog.

Pins

Pins of ManhattanSingleJunction

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

common

0

22

none

10

6

junction lead (the LOM’s L_J branch); LOM node j

Pins with direction none: common. They mark a point (a junction lead, a pad centre), not a CPW end. The KLayout ghost draws them as boxes. A route can start there only where the notes say so; it cannot be snapped to.

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

junction_type

"Manhattan Single Junction"

–

Junction Type

junction_width

0.02

μm

Junction width for code generated element

finger_overshoot

1.0

μm

Length of fingers after the junction.

include_base_metal_gap

true

–

Include base metal gap layer.

separate_junctions

true

–

Junctions to separate layer.

finger_overlap

1.0

μm

Length of fingers inside the pads.

width

22.0

μm

Width of the junction element.

pad_height

6.0

μm

Height of the junction pad.

pad_width

12.0

μm

Width of the junction pad.

pad_to_pad_separation

6.0

μm

Pad separation.

pad_rounding_radius

0.5

μm

Rounding radius of the junction pad.

include_base_metal_addition

true

–

Include base metal addition layer.

shadow_margin

0.5

μm

Shadow layer margin near the the pads.

offset_compensation

0

μm

Junction lead offset from junction width

mirror_offset

false

–

Move the junction lead offset to the other lead

height

22.0

μm

Height of the junction element.

x_offset

0

μm

Horizontal junction offset.

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

branch

type

nodes

value (estimate at defaults)

J_X

JJ

j – gnd

Lj_nH=–, Cj_fF=0

Nodes: j.

Simulation export notes

  • C3: junction sub-cell simulated on its own (status: fixed; fix in sim_tools/builder.py (is_junction_cell, _is_qubit, build_simulation); sim_tools/subset.py (has_junction))

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "ManhattanSingleJunction", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components ManhattanSingleJunction lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.