DoublePads

A two-island qubit, consisting of two rounded rectangles shunted by a junction, with one capacitive coupler.

Source: KQC (KQCircuits). Category: qubit. Module: kqcircuits.qubits.double_pads.

See also the catalog.

Pins

Pins of DoublePads

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

cplr

0

350

90

10

6

coupler port (readout / bus); LOM node cplr

drive

-450

0

180

10

6

drive / charge line end; control line (drive) in the LOM

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

mirror_squid

false

–

Mirror SQUID by its Y axis

junction_type

"Manhattan"

–

Junction Type

junction_width

0.02

μm

Junction width for code generated element

ground_gap

[700, 700]

–

Width, height of the ground gap (µm, µm)

ground_gap_r

50

μm

Ground gap rounding radius

coupler_extent

[150, 20]

–

Width, height of the coupler (µm, µm)

coupler_r

10

μm

Coupler rounding radius

coupler_a

10

μm

Width of the coupler waveguide center conductor

coupler_offset

20

μm

Distance from first qubit island to coupler

squid_offset

0

μm

Offset between SQUID center and qubit center

island1_extent

[500, 100]

–

Width, height of the first qubit island (µm, µm)

island1_r

50

μm

First qubit island rounding radius

island2_extent

[500, 100]

–

Width, height of the second qubit island (µm, µm)

island2_r

50

μm

Second qubit island rounding radius

island1_taper_width

10

µm

First qubit island tapering width on the island side

island1_taper_junction_width

10

µm

First qubit island tapering width on the junction side

island2_taper_width

10

µm

Second qubit island tapering width on the island side

island2_taper_junction_width

10

µm

Second qubit island tapering width on the junction side

island_island_gap

70

µm

Island to island gap distance

with_squid

true

–

Boolean whether to include the squid

finger_overshoot

1.0

μm

Length of fingers after the junction.

include_base_metal_gap

true

–

Include base metal gap layer

separate_junctions

true

–

Junctions to separate layer

finger_overlap

0.2

μm

Length of fingers inside the pads

width

22.0

μm

Width of the junction element.

pad_height

6.0

μm

Height of the junction pad.

pad_width

12.0

μm

Width of the junction pad.

pad_to_pad_separation

6.0

μm

Pad separation.

pad_rounding_radius

0.5

μm

Rounding radius of the junction pad.

single_junction

false

–

Disable the second junction

loop_area

100

μm^2

Loop area

fluxline_type

"Fluxline Standard"

–

Fluxline Type

drive_position

[-450, 0]

–

Coordinate for the drive port (µm, µm)

include_base_metal_addition

true

–

Include base metal addition layer.

shadow_margin

1.0

μm

Shadow layer margin near the the pads

offset_compensation

0

μm

Junction lead offset from junction width

mirror_offset

false

–

Move the junction lead offset to the other lead

height

22.0

μm

Height of the junction element.

x_offset

0

μm

Horizontal junction offset.

compact_geometry

false

–

Compact geometry for metal addition.

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

branch

type

nodes

value (estimate at defaults)

C_X_1

C

island1 – gnd

estimate=53.7, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25%

C_X_2

C

island2 – gnd

estimate=53.7, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25%

C_X_12

C

island1 – island2

estimate=27.6, unit=fF, estimate_source=analytic: coupled strips in a ground slot (Simons ch. 7) + short-edge CPW, estimate_kind=analytic, uncertainty=±25%

J_X

SQUID

island1 – island2

Lj_nH=6.734, Cj_fF=15, asym=0, flux_phi0=0

Cg_X_cplr

C

island1 – cplr

estimate=13.8, unit=fF, estimate_source=analytic: coupler 150×20 µm facing island1 across 20 µm (CPS), estimate_kind=analytic, uncertainty=±25%

Cc_X_cplr

C

cplr – gnd

estimate=7.6, unit=fF, estimate_source=rough: coupler pad in the qubit ground gap, estimate_kind=rough, uncertainty=±50%

Nodes: island1, island2, cplr.

  • X: floating transmon; island2 ↔ coupler capacitance neglected (screened by island1)

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "DoublePads", at=(3750, 3750), a=10)   # parameters: see the table above
d.add("PAD", "BondPad", at=(1125, 3750), rot=270)   # a launcher to connect to
d.route("L1", "PAD.a", "U1.cplr")                # a CPW from the pad to the pin

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components DoublePads lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.