JunctionTestPadsSimple

Junction test structures.

Source: KQC (KQCircuits). Category: test_structure. Module: kqcircuits.test_structures.junction_test_pads.junction_test_pads_simple.

See also the catalog.

Pins

Pins of JunctionTestPadsSimple

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

pad_width

500

μm

Pad width

area_width

1300

μm

Area width

junctions_horizontal

true

–

Horizontal (True) or vertical (False) junctions

pad_spacing

100

μm

Spacing between different pad pairs

only_pads

false

–

Only produce pads, no junctions

pad_configuration

"2-port"

–

Pad configuration

junction_width_steps

[0, 0]

μm, μm

Automatically generate junction widths [start, step]

junction_widths

[]

–

Optional junction widths for individual junctions

junction_test_pads_type

"Junction Test Pads Simple"

–

Type of junction test pads

mirror_squid

false

–

Mirror SQUID by its Y axis

junction_type

"Manhattan"

–

Junction Type

junction_width

0.02

μm

Junction width for code generated element

finger_overshoot

1.0

μm

Length of fingers after the junction.

include_base_metal_gap

true

–

Include base metal gap layer

separate_junctions

true

–

Junctions to separate layer

finger_overlap

0.2

μm

Length of fingers inside the pads

single_junction

false

–

Disable the second junction

area_height

1900

μm

Area height

loop_area

100

μm^2

Loop area

shadow_margin

1.0

μm

Shadow layer margin near the the pads

compact_geometry

false

–

Compact geometry for metal addition.

offset_compensation

0

μm

Junction lead offset from junction width

mirror_offset

false

–

Move the junction lead offset to the other lead

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "JunctionTestPadsSimple", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components JunctionTestPadsSimple lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.