quantcore_circuits.circuit.draw

Matplotlib schematic of a LOM circuit (circuit.json) with the element values that went into the simulation.

QuCat’s own Network.show() only works for networks made in its GUI, so this draws the lumped circuit directly: a ground rail at the bottom, one bus per conductor (node), elements to ground hanging down from it, and elements between two conductors drawn between (or arching over) the buses. Used by qcc circuit simulate --png and shown in the KLayout plugin’s LOM tab. Needs matplotlib only (imported when drawing).

Functions

draw_circuit(model, netlist, path[, title]) → pathlib.Path

Draw model (a CircuitModel) to the PNG path; netlist rows (LomResult.netlist) give

value_text(v[, unit, fmt]) → str

A netlist value with its unit. A pair (e.g. a resonator's C and L, unit "fF, nH") reads "302 fF ‖ 1.49 nH":

Module Contents

quantcore_circuits.circuit.draw.draw_circuit(model, netlist: list[dict] | None, path: str | pathlib.Path, title: str = '') → pathlib.Path

Draw model (a CircuitModel) to the PNG path; netlist rows (LomResult.netlist) give the values printed next to each element.

quantcore_circuits.circuit.draw.value_text(v, unit: str = '', fmt: str = '.3g') → str

A netlist value with its unit. A pair (e.g. a resonator’s C and L, unit “fF, nH”) reads “302 fF ‖ 1.49 nH”: the comma-separated units go one per value.