TrilayerJunctionHSQ

Single trilayer junction, first HSQ generation (legacy junction_creator_HSQ.create_junction).

Source: Quantcore. Category: junction. Module: quantcore_circuits.layouts.junctions.legacy_junctions.

See also the catalog.

Pins

Pins of TrilayerJunctionHSQ

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

common

0

20

none

10

6

junction lead (the LOM’s L_J branch); LOM node j

Pins with direction none: common. They mark a point (a junction lead, a pad centre), not a CPW end. The KLayout ghost draws them as boxes. A route can start there only where the notes say so; it cannot be snapped to.

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

junction_type

"Trilayer Junction HSQ"

–

Junction Type

junction_width

0.02

μm

Junction width for code generated element

finger_width

0.1

μm

Straight finger width (junction size)

second_finger_width

0.0

μm

Bent finger width (0 = same as straight)

window_width

32.0

μm

Exposure window width

straight_finger_length

3.2

μm

Straight finger length

straight_finger_y

-3.6

μm

Straight finger offset (legacy y)

bent_finger_length

3.0

μm

Bent finger length

bent_finger_y

-2.0

μm

Bent finger offset (legacy y)

bent_pad_width

1.0

μm

Bent finger lead width

hsq_width

0.2

μm

HSQ box width

bent_finger_x

0.2

μm

Bent finger offset (legacy x)

loop_area

100

μm^2

Loop area

window_height

20.0

μm

Exposure window height (= qubit gap it spans)

bent_shift

0.0

μm

Bent finger cell shift in y

with_hsq

true

–

Draw HSQ sidewall boxes

hsq_extra

0.1

μm

HSQ box extra length

spacer_gradient

true

–

Spacer gradient: 51–53/0 dose levels inside the 50/0 spacer (width / 3 strips; rings for windows)

lj_nH

0.0

nH

Size by the PDK junction rule for this L_J (SQUID: parallel total; 0 = use the finger widths)

clearer

false

–

Draw the CLEARER metal box under the windows (base_metal_addition)

clearer_inset

1.0

μm

CLEARER inset from the window sides

hsq_overlap

0.045

μm

HSQ overlap onto the finger

bent_conn_height

1.0

μm

Bent finger connection height

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

branch

type

nodes

value (estimate at defaults)

J_X

JJ

j – gnd

Lj_nH=202.033, Cj_fF=0.5

Nodes: j.

Simulation export notes

  • C3: junction sub-cell simulated on its own (status: fixed; fix in sim_tools/builder.py (is_junction_cell, _is_qubit, build_simulation); sim_tools/subset.py (has_junction))

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "TrilayerJunctionHSQ", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components TrilayerJunctionHSQ lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. ports without direction: common (ghost draws boxes).