quantcore_circuits.layouts.junctions.jj_fingers

The two finger exposures of the QWri trilayer junctions as stand-alone cells (legacy QuantumPcells JJ_finger_top.lym “JJ_finger Top” and JJ_finger_bottom.lym “JJ_finger Bottom”).

Each is one exposure of a cross junction, not a junction by itself (category shape: no ports, no LOM model); the junctions built from them are TrilayerJunction, TrilayerSquid and the cells in legacy_junctions. They exist for test structures and hand-made junction variants, and use the legacy parameters and frame (centred on the exposure window; with negative the cell is the window minus the finger and its lead, as in the legacy fab output):

  • JJFingerStraight (legacy “JJ_finger Top”, layer 2/0 → KQC SIS_junction): pad, finger and taper; invert flips the result vertically (legacy Trans(2, True)).

  • JJFingerBent (legacy “JJ_finger Bottom”, layer 4/0 → KQC SIS_junction_2): the bent finger with its holder; invert mirrors it before it is moved to (x, y).

The legacy coerce_parameters_impl rules (coerce_straight() / coerce_bent()) are applied, as KLayout does when the parameters are set.

Classes

JJFingerBent

Bent junction finger with its holder (legacy "JJ_finger Bottom"), on SIS_junction_2 (4/0).

JJFingerStraight

Straight junction finger (legacy "JJ_finger Top"), on SIS_junction (2/0).

Module Contents

class quantcore_circuits.layouts.junctions.jj_fingers.JJFingerBent

Bases: _Finger

Bent junction finger with its holder (legacy “JJ_finger Bottom”), on SIS_junction_2 (4/0).

build()
conn_height
finger_length
pad_width
window_height
window_width
y
class quantcore_circuits.layouts.junctions.jj_fingers.JJFingerStraight

Bases: _Finger

Straight junction finger (legacy “JJ_finger Top”), on SIS_junction (2/0).

build()
finger_length
pad_height
pad_width
window_height
window_width
y