JtwpaChain

Series chain of cells trilayer junctions along +x (4WM JTWPA; twpa-sim jtwpa4wm; QPDK resonantly

Source: Quantcore. Category: waveguide. Module: quantcore_circuits.layouts.others.amplifiers.

See also the catalog.

Pins

Pins of JtwpaChain

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

a

0

0

180

10

6

CPW end; LOM node n0

b

1020

0

0

10

6

CPW end; LOM node n16

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

lead_length

30

μm

CPW lead at each end

island_width

20

μm

Island (centre line) width

junction_gap

12

μm

Cut between islands (junction window height)

junction_type

"Quantcore Junction"

–

Junction (trilayer cell)

junction_params

"{}"

–

Trilayer junction cell parameters (JSON dict)

shunt_fingers

4

–

Island fingers per side per full island

shunt_finger_length

40

μm

Shunt finger length

shunt_finger_width

2

μm

Shunt finger width

shunt_gap

2

μm

Gap between shunt fingers / to the walls

coupling_fingers

10

–

Coupling capacitor fingers

coupling_finger_length

40

μm

Coupling finger length

resonator_pad

[160, 120]

–

Resonator pad (width along x, height), µm

resonator_gap

10

μm

Pad / inductor clearance in the resonator pocket

inductor_width

2

μm

Meander inductor strip width

inductor_turns

10

–

Meander inductor turns

inductor_height

120

μm

Meander inductor height (pad to wall)

cells

16

–

Junctions in the chain

cell_pitch

60

μm

Junction pitch

resonator_every

4

–

A resonator on every M-th node (0 = none)

resonator_offset

2

–

First resonator node

wall

10

μm

Ground wall between the trench and a resonator pocket

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

branch

type

nodes

value (estimate at defaults)

Cg_X_0

C

n0 – gnd

estimate=16.8, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_1

C

n1 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_2

C

n2 – gnd

estimate=16, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_3

C

n3 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_4

C

n4 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_5

C

n5 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_6

C

n6 – gnd

estimate=16, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_7

C

n7 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_8

C

n8 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_9

C

n9 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_10

C

n10 – gnd

estimate=16, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_11

C

n11 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_12

C

n12 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_13

C

n13 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_14

C

n14 – gnd

estimate=16, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_15

C

n15 – gnd

estimate=31.9, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cg_X_16

C

n16 – gnd

estimate=16.8, unit=fF, estimate_source=analytic: shunt fingers (IDC, Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

J_X_0

JJ

n0 – n1

Lj_nH=6.734, Cj_fF=15

J_X_1

JJ

n1 – n2

Lj_nH=6.734, Cj_fF=15

J_X_2

JJ

n2 – n3

Lj_nH=6.734, Cj_fF=15

J_X_3

JJ

n3 – n4

Lj_nH=6.734, Cj_fF=15

J_X_4

JJ

n4 – n5

Lj_nH=6.734, Cj_fF=15

J_X_5

JJ

n5 – n6

Lj_nH=6.734, Cj_fF=15

J_X_6

JJ

n6 – n7

Lj_nH=6.734, Cj_fF=15

J_X_7

JJ

n7 – n8

Lj_nH=6.734, Cj_fF=15

J_X_8

JJ

n8 – n9

Lj_nH=6.734, Cj_fF=15

J_X_9

JJ

n9 – n10

Lj_nH=6.734, Cj_fF=15

J_X_10

JJ

n10 – n11

Lj_nH=6.734, Cj_fF=15

J_X_11

JJ

n11 – n12

Lj_nH=6.734, Cj_fF=15

J_X_12

JJ

n12 – n13

Lj_nH=6.734, Cj_fF=15

J_X_13

JJ

n13 – n14

Lj_nH=6.734, Cj_fF=15

J_X_14

JJ

n14 – n15

Lj_nH=6.734, Cj_fF=15

J_X_15

JJ

n15 – n16

Lj_nH=6.734, Cj_fF=15

Cc_X_2

C

n2 – r2

estimate=17.9, unit=fF, estimate_source=analytic: coupling IDC (Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cr_X_2

C

r2 – gnd

estimate=72, unit=fF, estimate_source=rough: resonator pad to its pocket, estimate_kind=rough, uncertainty=±50%

Lr_X_2

L

r2 – gnd

L_nH=2.769, L_k_nH=0.099

Cc_X_6

C

n6 – r6

estimate=17.9, unit=fF, estimate_source=analytic: coupling IDC (Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cr_X_6

C

r6 – gnd

estimate=72, unit=fF, estimate_source=rough: resonator pad to its pocket, estimate_kind=rough, uncertainty=±50%

Lr_X_6

L

r6 – gnd

L_nH=2.769, L_k_nH=0.099

Cc_X_10

C

n10 – r10

estimate=17.9, unit=fF, estimate_source=analytic: coupling IDC (Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cr_X_10

C

r10 – gnd

estimate=72, unit=fF, estimate_source=rough: resonator pad to its pocket, estimate_kind=rough, uncertainty=±50%

Lr_X_10

L

r10 – gnd

L_nH=2.769, L_k_nH=0.099

Cc_X_14

C

n14 – r14

estimate=17.9, unit=fF, estimate_source=analytic: coupling IDC (Igreja–Dias), estimate_kind=analytic, uncertainty=±25%

Cr_X_14

C

r14 – gnd

estimate=72, unit=fF, estimate_source=rough: resonator pad to its pocket, estimate_kind=rough, uncertainty=±50%

Lr_X_14

L

r14 – gnd

L_nH=2.769, L_k_nH=0.099

Nodes: n0, n1, n2, n3, n4, n5, n6, n7, n8, n9, n10, n11, n12, n13, n14, n15, n16, r2, r6, r10, r14.

  • X: JTWPA chain of 16 junctions (L_J 6.73442 nH, drawn Quantcore Junction (PDK junction rule)), 4 loading resonators; simulate the ladder with analysis.amplifiers (QuCat is limited to a few junctions)

Simulation export notes

  • C7: C-matrix nets without a design label (warning) (status: fixed; fix in sim_tools/builder.py (_cell_probes, label_unnamed); layouts/others/amplifiers.py (JtwpaChain.qcc_probes))

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "JtwpaChain", at=(3750, 3750), a=10)   # parameters: see the table above
d.add("PAD", "BondPad", at=(1125, 3750), rot=270)   # a launcher to connect to
d.route("L1", "PAD.a", "U1.a")                # a CPW from the pad to the pin

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components JtwpaChain lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect ok, build ok.