FluxHoleArray

Array of square flux-trapping holes in the ground plane (legacy chips’ flux_holes).

Source: Quantcore. Category: other. Module: quantcore_circuits.layouts.others.cpw_segment.

Note

Alias of FluxHoles: the same circuit, drawn differently. the array’s hole centres as FluxHoles’ list (XOR 0); no circuit elements

See also the catalog.

Pins

Pins of FluxHoleArray

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

hole_size

5

μm

Hole size

pitch_x

20

μm

Pitch in x

pitch_y

15

μm

Pitch in y

nx

10

–

Holes in x

ny

2

–

Holes in y

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

  • no lumped branches

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "FluxHoleArray", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components FluxHoleArray lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.