KiTwpaSerpentine

Kinetic-inductance TWPA serpentine (twpa-sim KITLayout / kit.primitives, the NY CREATES research

Source: Quantcore. Category: waveguide. Module: quantcore_circuits.layouts.others.amplifiers.

See also the catalog.

Pins

Pins of KiTwpaSerpentine

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

a

-324

154

180

10

6

CPW end; LOM node line

b

-324

-154

180

10

6

CPW end; LOM node line

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

turn_periods

3

–

Supercells per U-turn

spine_width

0.58

μm

Spine width

spine_gap

0.5

μm

Spine gap

finger_width

0.5

μm

Finger width

finger_gap

0.25

μm

Finger gap

finger_length

75.5

μm

Finger length

loaded_finger_length

27.5

μm

Loaded finger length

turn_radius

154

μm

Turn radius (row spacing / 2)

taper_cells

6

–

Turn taper cells

launch_taper_length

88

μm

Launch taper (spine → a/b)

launch_length

155

μm

Launch straight (a/b) to the port

sheet_inductance_pH_sq

0.0

–

Film sheet kinetic inductance for the ladder (0 = PDK film)

rows

2

–

Rows

periods_per_row

2

–

Supercells per row

unloaded_cells

48

–

Unloaded cells per supercell (even)

loaded_cells

6

–

Loaded cells per supercell

pitch

1.5

μm

Cell pitch

bias_ratio

0.2

–

Turn sheet-square bias ratio

arc_points

513

–

Points on a turn arc

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

  • no lumped branches

line

node

length (µm)

a (µm)

b (µm)

ends

X

line

567

0.58

0.5

open / open

Nodes: line.

  • X: KI-TWPA ladder of 378 cells, L 1.01 pH/cell (kinetic 29.8% at 0.116 pH/□), C 23.6 fF/cell, Z ≈ 7 Ω (analysis.amplifiers for dispersion and gain)

Simulation export notes

  • C6: eigenmode 50 Ω edge port without a polygon (box edge on a bend / taper / narrow line) (status: fixed; fix in sim_tools/builder.py (straighten_box, edge_port_ok, crossing_square))

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "KiTwpaSerpentine", at=(3750, 3750), a=10)   # parameters: see the table above
d.add("PAD", "BondPad", at=(1125, 3750), rot=270)   # a launcher to connect to
d.route("L1", "PAD.a", "U1.a")                # a CPW from the pad to the pin

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components KiTwpaSerpentine lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect ok, build ok. no etched outline (bbox only ghost).