CpweQuarterWaveResonator

λ/4 resonator capacitively coupled through an open-ended arm parallel to the feedline (legacy

Source: Quantcore. Category: resonator. Module: quantcore_circuits.layouts.others.cpwe.

See also the catalog.

Pins

Pins of CpweQuarterWaveResonator

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

cap_width

3

μm

Coupler centre width (legacy wcap)

cap_gap

1.6

μm

Coupler gap (legacy scap)

cap_length

200

μm

Coupler length (legacy cap_len)

cap_radius

20

μm

Coupler bend radius (legacy cap_rad)

taper_length

20

μm

Taper to the resonator CPW (legacy t_len)

meander_radius

50

μm

Meander radius (legacy m_radius)

meander_length

1000

μm

Meander straight length (legacy m_length)

meanders

2

–

Meander periods (legacy m_n)

excess_1

300

μm

Extra length before the meander (legacy ex1)

excess_2

70.26554

μm

Extra length after the meander (legacy ex2)

flip

true

–

Mirror (legacy flip)

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

  • no lumped branches

line

node

length (µm)

a (µm)

b (µm)

ends

X

res

5300

10

6

open / short

Nodes: res.

  • X: λ/4 of 5300 µm (drawn); coupler arm CPW differs from the line CPW

Simulation export notes

  • C8: GDS polygon with > 4095 points (XY record > 0x8000 bytes) (status: partly fixed; fix in sim_tools/builder.py (FaceMetal.max_points, DesignSimulation.simplified_region, split_large_polygons); sim_tools/geometry_check.py)

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "CpweQuarterWaveResonator", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components CpweQuarterWaveResonator lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports (a coupler arm only); lambda/4 for CPWE chips, place it next to the line by hand.