CrossTest

PCell declaration for optical lithography test alignment cross markers.

Source: KQC (KQCircuits). Category: test_structure. Module: kqcircuits.test_structures.cross_test.

See also the catalog.

Pins

Pins of CrossTest

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

num_crosses

10

–

Number of crosses

cross_width

4

μm

Width of the crosses arms

cross_length

15

μm

Length of the crosses

cross_spacing

100

μm

Spacing between the crosses

cross_box_distance

4

μm

Distance between crosses and respective boxes

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "CrossTest", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components CrossTest lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.