FlipChipConnectorDc

PCell declaration for an inter-chip dc connector.

Source: KQC (KQCircuits). Category: flip_chip. Module: kqcircuits.elements.flip_chip_connectors.flip_chip_connector_dc.

See also the catalog.

Pins

Pins of FlipChipConnectorDc

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

ubm_diameter

40

μm

Under-bump metalization diameter

bump_diameter

25

μm

Bump diameter

bump_type

"Flip Chip Connector Dc"

–

Bump type

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "FlipChipConnectorDc", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components FlipChipConnectorDc lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.