quantcore_circuits.layouts.others.test_pads¶
Junction test structures (ported from the QWri testPad*.py / xtp_testpads_TL_small.py scripts).
JunctionTestPads: two probe pads facing each other across a 20 µm junction window, with a trilayer junction (straight + bent finger) between the triangular pad tips. One class covers the four legacy scripts;legacy_test_pad_params()gives each script’s parameters (testPad_AVAQUSchips 01–02,testPad_Nb_TLchip 04,testPad_Nb_TL_HSQchips 05/06/08,xtp_testpads_TL_smallchip 10a).JunctionGroundPad: one rounded 400 µm pad in a 500 µm etch window, joined to ground by a 50 µm bridge carrying the junction (legacytestPad.py, chips 01–02).
Frame: pad structure centred at the origin (legacy frame); the junction sits at the origin (JunctionGroundPad:
at junction_y on the bridge). Layers (fab mode): legacy 1/0 → base_metal_gap_wo_grid, 2/0 (straight
finger) → SIS_junction, 4/0 (bent finger) → SIS_junction_2, 500/0 → qcc hsq (+ the 51–53/0 spacer
gradient, on by default: spacer_gradient_levels()). The legacy
scripts also draw a separate 3/0 pattern (the other pad kept in the second metal); the Quantcore stack derives 3/0
from 1/0 at export, so it is not drawn — junction_test_pad_regions() / junction_ground_pad_regions()
still return it ("m3"). No ports: these are probe structures; refpoints mark the pads and the junction.
Classes¶
Rounded probe pad joined to ground by a bridge carrying a trilayer junction (legacy |
|
Two probe pads with a trilayer junction between their tips (legacy |
|
Probe-pad pair of the chip_11m junction test array (legacy |
Functions¶
|
Legacy |
|
Legacy |
|
|
|
Legacy |
Module Contents¶
- class quantcore_circuits.layouts.others.test_pads.JunctionGroundPad¶
Bases:
kqcircuits.elements.element.ElementRounded probe pad joined to ground by a bridge carrying a trilayer junction (legacy
testPad.py).- build()¶
- classmethod qcc_keepout(params: dict) list¶
3/0 keep-out (local µm): the legacy
testPad.py3/0 (the etch window minus the ground bridge).
- box_size¶
- bridge_width¶
- corner_points¶
- finger_width¶
- junction_y¶
- pad_r_inner¶
- pad_r_outer¶
- pad_size¶
- qcc_category = 'test_structure'¶
- second_finger_width¶
- class quantcore_circuits.layouts.others.test_pads.JunctionTestPads¶
Bases:
kqcircuits.elements.element.ElementTwo probe pads with a trilayer junction between their tips (legacy
testPad_*/xtp_testpads).- build()¶
- classmethod qcc_keepout(params: dict) list¶
3/0 keep-out (local µm): the legacy scripts’ own 3/0 pattern (
m3: the pad structure, the other pad kept in the second metal).
- bent_conn_height¶
- bent_finger_length¶
- bent_finger_x¶
- bent_finger_y¶
- bent_pad_width¶
- box_extra¶
- box_height¶
- finger_origin¶
- finger_width¶
- hsq_extra_high¶
- hsq_extra_low¶
- hsq_overlap¶
- hsq_width¶
- hsq_y_offset¶
- junction_height¶
- junction_width¶
- label¶
- label_pos¶
- label_size¶
- lower_pad_height¶
- lower_pad_trim¶
- lower_pad_width¶
- middle_height¶
- qcc_category = 'test_structure'¶
- second_finger_width¶
- spacer_gradient¶
- straight_finger_length¶
- straight_finger_y¶
- straight_pad_width¶
- upper_pad_height¶
- upper_pad_trim¶
- upper_pad_width¶
- with_hsq¶
- class quantcore_circuits.layouts.others.test_pads.ProbePadPair¶
Bases:
kqcircuits.elements.element.ElementProbe-pad pair of the chip_11m junction test array (legacy
chip_11m_TestJJ16x_pads.create_testPad, whose pads are commented out there; chip_11f lands theJX_500junctions on such pads).A
pad_width + window_extra× (pads +middle_height) window: the upper pad is kept in the base metal (1/0 = window − upper pad − its tip − the centrecutout), the lower pad in the second metal (the legacy 3/0 = window − lower pad − its tip − cut-out, returned byqcc_keepout()). At the legacy sizes the pads endmiddle_height / 2(100 µm) from the junction, as drawn; setmiddle_heightto the cut-out height (11 µm) to bring them to it.junction_type"Trilayer Junction Compact"(or any trilayer cell) places that junction centred in the cut-out (junction_paramspassed on, e.g.{"finger_width": 0.2, "lj_nH": …}; the compact junction’s 12 µm window overlaps the 11 µm cut-out by 0.5 µm per side, the “1 µm overlap” request). No ports (DC probe pads); refpointsjunction,upper_pad,lower_pad.- build()¶
- classmethod qcc_keepout(params: dict) list¶
3/0 keep-out (local µm): the legacy script’s second-metal pattern (
m3).
- classmethod qcc_params(params: dict) dict¶
- cutout¶
- junction_params¶
- junction_type¶
- lower_pad_height¶
- middle_height¶
- pad_trim¶
- pad_width¶
- qcc_category = 'test_structure'¶
- upper_pad_height¶
- window_extra¶
- quantcore_circuits.layouts.others.test_pads.junction_ground_pad_regions(dbu, box_size=500, pad_size=400, pad_r_inner=40, pad_r_outer=20, corner_points=64, bridge_width=50, junction_y=-225, finger_width=0.26, second_finger_width=0.2, straight_finger_y=-2, straight_pad_width=1.2, straight_finger_length=3, straight_window=(52, 50), bent_finger_y=-4, bent_pad_width=1, bent_finger_length=3, bent_conn_height=0.5, bent_window=(52, 49), bent_offset=1) dict¶
Legacy
testPad.create_testPadgeometry in dbu:{"m1", "m3", "straight", "bent"}Regions.
- quantcore_circuits.layouts.others.test_pads.junction_test_pad_regions(dbu, upper_pad_width=500, upper_pad_height=400, lower_pad_width=500, lower_pad_height=400, middle_height=300, box_extra=100, box_height=0, upper_pad_trim=50, lower_pad_trim=50, junction_width=20, junction_height=20, finger_origin=5, finger_width=0.5, second_finger_width=0.6, straight_finger_y=-2.4, straight_pad_width=1.2, straight_finger_length=3, bent_finger_x=0.2, bent_finger_y=-3.4, bent_pad_width=1.6, bent_finger_length=3, bent_conn_height=0.5, with_hsq=True, hsq_width=0.2, hsq_overlap=0.045, hsq_y_offset=-0.85, hsq_extra_low=0.1, hsq_extra_high=0.2, label='', label_size=100, label_pos=(-140, 400)) dict¶
Legacy
create_testPadgeometry in dbu:{"m1", "m3", "straight", "bent", "hsq"}Regions.
- quantcore_circuits.layouts.others.test_pads.legacy_test_pad_params(variant: str, size: float = 1.0, second_finger: float = 0.0) dict¶
JunctionTestPadsparameters reproducing legacy<variant>.create_testPad(size, second_finger).sizeis the legacy junction size (straight finger0.2·sizeµm);second_fingerthe bent-finger width in µm (0 → same as the straight finger; the legacy scripts fail in that case).
- quantcore_circuits.layouts.others.test_pads.probe_pad_pair_regions(dbu, pad_width=500.0, upper_pad_height=400.0, lower_pad_height=400.0, middle_height=200.0, window_extra=100.0, pad_trim=50.0, cutout=11.0, tip_width=5.0, tip_y=6.0, tip_apex=4.5) dict¶
Legacy
chip_11m_TestJJ16x_pads.create_testPadpads (commented out there), in dbu:{"m1", "m3"}— 1/0 = window − upper pad − its tip triangle − centre cut-out, 3/0 = window − lower pad − its triangle − cut-out.