TsvTestPattern

PCell declaration for TSV test structures which resembles a TSV fencing for a CPW transmission line.

Source: KQC (KQCircuits). Category: test_structure. Module: kqcircuits.test_structures.tsv_test_pattern.

See also the catalog.

Pins

Pins of TsvTestPattern

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

tsv_elliptical_width

30

μm

TSV elliptical width

cpw_distance

100

μm

CPW Placeholder distance

hor_distance

200

μm

Horizontal pitch on TSV

ver_distance

500

μm

Vertical pitch on TSV

tsv_array_form

[2, 6, 6, 2, 6, 6, 2]

–

TSV test layout

tsv_type

"Tsv Ellipse"

–

TSV type

tsv_diameter

10

μm

TSV diameter

tsv_margin

30

μm

TSV margin

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "TsvTestPattern", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components TsvTestPattern lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.