StripesTestIncreasingWidth¶
PCell declaration for optical lithography test stripes.
Source: KQC (KQCircuits). Category: test_structure. Module: kqcircuits.test_structures.stripes_test_increasing_width.
Note
Canonical cell of an alias group. Aliases: StripesTest.
See also the catalog.
Pins¶

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.
No pins: this cell has no ports. Place it with at= / rot=.
Parameters¶
name |
default |
unit |
description |
|---|---|---|---|
|
|
μm |
Width of center conductor |
|
|
μm |
Width of gap |
|
|
μm |
Turn radius |
|
|
μm |
Beginning width of the stripe sequence |
|
|
μm |
Length of the stripes |
|
|
μm |
Spacing between the stripes |
|
|
– |
Number of stripes |
|
|
μm |
Stripe widening increment in the stripe sequence |
Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.
LOM model¶
none (a LOM build gives each pin its own bare node, without elements).
How to use¶
In Python:
from quantcore_circuits.designer import Designer
d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "StripesTestIncreasingWidth", at=(3750, 3750), a=10) # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=
Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components StripesTestIncreasingWidth lists the pins; add --schema for the parameters.
In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.