Component catalog¶
Generated by python scripts/make_catalog.py on 2026-11-16 from quantcore_circuits.layouts.catalog.catalog(). Do not edit by hand.
143 components usable as a design.json cell (57 Quantcore, 45 KQCircuits, 41 Quantum Metal), 109 with a LOM model; plus 25 whole chips (reference cells) and 6 Metal routes (not cells: use a qcc route).
ref goes into
design.jsoncell/Designer.add(name, ref, ...);metal:<Class>takes the Metal options as params.ports: the ports of a default instance, read from the cell built through the design-plan path (
qcc components <ref>prints positions, directions and CPW widths). A port marked † has no direction (cannot be snapped to; see the note).LOM: a lumped model is registered (
quantcore_circuits.lom.fragment.lom_model(ref)).origin: the legacy QWri file a Quantcore cell reproduces (golden XOR tests in
tests/test_golden_legacy*.py; full map inMIGRATION.md).
Summary¶
category |
Quantcore |
KQC |
Metal |
with LOM |
|---|---|---|---|---|
qubit |
5 |
5 |
11 |
21 / 21 |
junction |
8 |
5 |
5 |
18 / 18 |
coupler |
3 |
1 |
5 |
9 / 9 |
capacitor |
4 |
5 |
3 |
12 / 12 |
resonator |
6 |
3 |
3 |
12 / 12 |
launcher |
3 |
2 |
3 |
8 / 8 |
termination |
3 |
0 |
2 |
5 / 5 |
waveguide |
6 |
7 |
1 |
14 / 14 |
airbridge |
0 |
3 |
1 |
4 / 4 |
marker |
8 |
3 |
0 |
0 / 11 |
test_structure |
4 |
6 |
0 |
1 / 10 |
flip_chip |
0 |
3 |
0 |
0 / 3 |
shape |
5 |
0 |
7 |
1 / 12 |
other |
2 |
2 |
0 |
4 / 4 |
qubit¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
Flipmon |
|
quantcore |
coupler, squid_a, squid_b |
yes |
QPDK flipmon_with_bbox (MIT). Face 2b1 (top-chip disc, its etch, the bump) is on KQC face-2b1 layers, which the PDK maps to 800/0+ (flip-chip). Port ‘coupler’ is on the M1 etch edge, 13 µm beyond QPDK’s plate port o1 at defaults. |
Gatemon |
|
quantcore |
gate, readout, squid_a, squid_b |
yes |
QPDK gatemon (MIT): M1 plus the CNT contacts, nanotube, hBN, Al patches and top gate on the proposed layers 600-604/0 (qpdk_cells.GATEMON_LAYERS; no fab numbers yet, draw_process_layers=False for M1 only). Port ‘readout’ is the island edge (a = island width, b = pocket_gap_top), not a CPW end: snap it to GatemonCoupler.qubit. |
TransmonTaperedInsets |
|
quantcore |
bottom_left_pin, bottom_pocket_pin, bottom_right_pin, squid_a, squid_b, top_left_pin, top_pocket_pin, top_right_pin |
yes |
SQDMetal TransmonTaperedInsets (Apache-2.0). The corner and pocket pins keep SQDMetal’s normals (top_pin +x, bottom_pin +y, top_pocket_pin +x, bottom_pocket_pin -x): placement marks in or at the pocket, not CPW ends. Connection-pad ports are CPW ends. |
TwoPadTransmon |
|
quantcore |
left, right, squid_a, squid_b |
yes |
legacy |
Xmon |
|
quantcore |
claw_n |
yes |
legacy |
CircularTransmonSingleIsland |
|
kqc |
coupler_1, coupler_2, coupler_3, drive |
yes |
The PCell declaration for a single island circular transmon. |
ConcentricTransmon |
|
kqc |
coupler_1, coupler_2, coupler_3, drive |
yes |
The PCell declaration for a concentric transmon. |
DoublePads |
|
kqc |
cplr, drive |
yes |
A two-island qubit, consisting of two rounded rectangles shunted by a junction, with one capacitive coupler. |
DoublePadsSplines |
|
kqc |
cplr, drive |
yes |
A two-island qubit, consisting of two spline-constructed islands shunted by a junction, |
Swissmon |
|
kqc |
cplr0, cplr1, cplr2, drive†, flux |
yes |
port ‘drive’ has no direction with default parameters (KQC puts no port_drive_corner). Coupler ports ‘cplr0..2’ have a = port_width[i]; the qubit’s own gap around them is wider than b. |
StarQubit |
|
metal |
pin_cpl1, pin_cpl2, pin_cpl3, pin_cpl4, pin_rdout, squid_a, squid_b |
yes |
A single configurable circle with multiple pads. |
TransmonConcentric |
|
metal |
pin1, pin2, pin3, squid_a, squid_b |
yes |
The base |
TransmonConcentricType2 |
|
metal |
pin1, pin2, pin3, squid_a, squid_b |
yes |
draws metal only, no pocket (Metal leaves its pocket commented out): alone it is empty in the negative mask, as in Metal’s own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal’s defaults are mm-scale. |
TransmonCross |
|
metal |
squid_a, squid_b |
yes |
The base |
TransmonCrossFL |
|
metal |
flux_line, squid_a, squid_b |
yes |
The base |
TransmonInterdigitated |
|
metal |
bus1, bus2, readout, squid_a, squid_b |
yes |
The base “TransmonInterdigitated” inherits the “QComponent” class. |
TransmonPocket |
|
metal |
squid_a, squid_b |
yes |
The base |
TransmonPocket6 |
|
metal |
squid_a, squid_b |
yes |
Transmon pocket with 6 connection pads. |
TransmonPocketCL |
|
metal |
Charge_Line, squid_a, squid_b |
yes |
The base |
TransmonPocketTeeth |
|
metal |
squid_a, squid_b |
yes |
Transmon pocket with ‘Teeth’ connection pads. |
TransmonStar |
|
metal |
squid_a, squid_b |
yes |
The base |
junction¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
QuantcoreJunction |
|
quantcore |
common |
yes |
The Quantcore PDK junction ( |
QuantcoreSquid |
|
quantcore |
common |
yes |
The Quantcore PDK SQUID ( |
SquidV0 |
|
quantcore |
common |
yes |
legacy |
TrilayerJunction |
|
quantcore |
common |
yes |
legacy |
TrilayerJunctionCompact |
|
quantcore |
common |
yes |
legacy |
TrilayerJunctionHSQ |
|
quantcore |
common |
yes |
legacy |
TrilayerSquid |
|
quantcore |
common |
yes |
legacy |
TrilayerSquidHSQ |
|
quantcore |
common |
yes |
legacy |
Manhattan |
|
kqc |
common |
yes |
The PCell declaration for a Manhattan style SQUID. |
ManhattanSingleJunction |
|
kqc |
common |
yes |
The PCell declaration for a Manhattan style single junction. |
NoSquid |
|
kqc |
common |
yes |
The PCell declaration for a No SQUID junction. |
Sim |
|
kqc |
common, squid_a, squid_b |
yes |
The PCell declaration for a simulation type SQUID. |
SuperInductor |
|
kqc |
common |
yes |
The PCell declaration for a Manhattan style single junction. |
BridgeFreeJunction |
|
metal |
(none) |
yes |
user_bridgefreejj.png |
jj_dolan |
|
metal |
(none) |
yes |
Dolan-bridge Josephson junction. |
jj_manhattan |
|
metal |
(none) |
yes |
Manhattan-style Josephson junction. |
SNAIL |
|
metal |
a, b, squid_a, squid_b |
yes |
A SNAIL (Superconducting Nonlinear Asymmetric Inductive eLement). |
SQUID_LOOP |
|
metal |
(none) |
yes |
The base “SQUID_LOOP” inherits the “QComponent” class. |
coupler¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
GatemonCoupler |
|
quantcore |
o1, o2, qubit |
yes |
QPDK gatemon_coupler (MIT). Port ‘qubit’ is a capacitive reference plane (a = island_width, b = pocket_gap_top), not a CPW end: snap a Gatemon ‘readout’ to it. |
HyperbolicVertexCoupler |
|
quantcore |
o1, o2, o3 |
yes |
|
PadCoupler |
|
quantcore |
left, right |
yes |
legacy |
CapacitiveXCoupler |
|
kqc |
p11, p21, p31, p41 |
yes |
KQC draws no port refpoints, only its arm ends p11, p21, p31, p41 (KQC’s own simulation ports): qcc gives them as CPW ports (element a/b) facing out along each arm (registry.KQC_EXTRA_PORTS, ‘+’: S, E, N, W; ‘x’: the corners). LOM: each arm couples through its finger capacitor to the floating centre cross. |
CapNInterdigitalTee |
|
metal |
prime_end, prime_start, second_end |
yes |
Generates a three pin (+) structure comprised of a primary two pin CPW |
CoupledLineTee |
|
metal |
prime_end, prime_start, second_end |
yes |
Generates a three pin (+) structure comprised of a primary two pin CPW |
LineTee |
|
metal |
prime_end, prime_start, second_end |
yes |
Generates a three pin (+) structure comprised of a primary two pin CPW |
TunableCoupler01 |
|
metal |
Control, Flux, squid_a, squid_b |
yes |
One of the tunable couplers Based off the implementation in |
TunableCoupler02 |
|
metal |
fbl, pin1, pin2, squid_a, squid_b |
yes |
draws metal only, no pocket (Metal computes its pocket but never adds it): alone it is empty in the negative mask, as in Metal’s own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal’s defaults are mm-scale. |
capacitor¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
CpweFingerCapacitor |
|
quantcore |
a, b |
yes |
legacy |
CpweFingerLine |
|
quantcore |
a, b |
yes |
legacy |
CpweGapCapacitor |
|
quantcore |
a, b |
yes |
legacy |
SmoothCapacitorSemicircle |
|
quantcore |
a, target |
yes |
SQDMetal Smooth_Capacitor_Semicircle (Apache-2.0). Port ‘target’ is a placement reference: snap it to the qubit pin (SQDMetal start_pin); routes start at ‘a’ (set lead_length to reach the pocket edge). |
CircularCapacitor |
|
kqc |
a, b |
yes |
The PCell declaration for a circular capacitor. |
FingerCapacitorSquare |
|
kqc |
a, b |
yes |
The PCell declaration for a square finger capacitor. |
FingerCapacitorTaper |
|
kqc |
a, b |
yes |
The PCell declaration for a tapered finger capacitor. |
SmoothCapacitor |
|
kqc |
a, b |
yes |
The PCell declaration for a smooth finger capacitor. |
SpiralCapacitor |
|
kqc |
a, b |
yes |
The PCell declaration for a spiral capacitor. |
Cap3Interdigital |
|
metal |
a, b |
yes |
Create a three finger planar capacitor with a ground pocket cuttout. |
CapFingerInFrame |
|
metal |
finger, frame |
yes |
Two-pin gap capacitor with one electrode framing the other. |
CapNInterdigital |
|
metal |
north_end, south_end |
yes |
Generates a two pin (+) structure comprised of a north CPW transmission |
resonator¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
CoupledResonator |
|
quantcore |
end |
yes |
legacy |
CpweQuarterWaveResonator |
|
quantcore |
(none) |
yes |
legacy |
CpwResonator |
|
quantcore |
end, start |
yes |
legacy |
LumpedJpa |
|
quantcore |
signal, squid_a, squid_b |
yes |
Lumped JPA: a trilayer junction or SQUID to ground, shunted by an interdigital capacitor (twpa-sim |
QubitResonator |
|
quantcore |
end |
yes |
legacy |
SpiralLine |
|
quantcore |
a, b |
yes |
legacy draw.spiral (Archimedean / Fermat / double Fermat by angle; the legacy double-Fermat typo y_bls/y1s fixed). Ports ‘a’/’b’ at the path ends face along the tangent (not Manhattan); metal by default: place it on a pocket (pocket_margin, or metal:Rectangle subtract). LOM: an open-ended line of the drawn length (rough, no kinetic inductance). |
HangerResonator |
|
kqc |
a, b, resonator_a, resonator_b |
yes |
Hanger Resonator |
QuarterWaveCpwResonator |
|
kqc |
a, b, resonator_b |
yes |
CPW Resonator |
SpiralResonatorPolygon |
|
kqc |
a, b |
yes |
The PCell declaration for a polygon shaped spiral resonator. |
ReadoutResFC |
|
metal |
readout |
yes |
ReadoutResFC.png |
ResonatorCoilRect |
|
metal |
spiralPin |
yes |
A rectangle spiral resonator based on length input. The X dimension is |
ResonatorLumped |
|
metal |
pin_east, pin_n, pin_ne, pin_nw, pin_s, pin_se, pin_sw, pin_west |
yes |
draws metal only, no pocket (perimeter and trace are both metal): alone it is empty in the negative mask, as in Metal’s own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal’s defaults are mm-scale. |
launcher¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
BondPad |
|
quantcore |
a |
yes |
legacy |
ConnectorPad |
|
quantcore |
a |
yes |
legacy |
CpweBondPad |
|
quantcore |
a |
yes |
legacy |
Launcher |
|
kqc |
port |
yes |
The PCell declaration for a launcher for connecting wirebonds. |
LauncherDC |
|
kqc |
port† |
yes |
DC pad: its one port ‘port’ sits at the pad centre with no direction (KQC adds no corner; the square pad is symmetric). Place it with at=/rot=; a route may start or end there (it leaves toward its next node); it cannot be snapped to. For an RF launcher with a directed port use Launcher or BondPad. |
LaunchpadWirebond |
|
metal |
tie |
yes |
Launch pad to feed/read signals to/from the chip. |
LaunchpadWirebondCoupled |
|
metal |
tie |
yes |
Launch pad to feed/read signals to/from the chip. |
LaunchpadWirebondDriven |
|
metal |
in, tie |
yes |
Launch pad to feed/read signals to/from the chip. |
termination¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
CpweOpenEnd |
|
quantcore |
a |
yes |
legacy |
NeckTermination |
|
quantcore |
o1 |
yes |
Shorted CPW end through a taper and a narrow neck in an etched window (QPDK |
SquidTermination |
|
quantcore |
a, pump, squid_a, squid_b |
yes |
CPW lead shorted to ground through a trilayer SQUID, with a shorted pump / flux line (QPDK |
OpenToGround |
|
metal |
open |
yes |
A sample_shapes open to ground termination. Functions as a pin for auto drawing. |
ShortToGround |
|
metal |
short |
yes |
ShortToGround.png |
waveguide¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
CoupledConnector |
|
quantcore |
end, start |
yes |
legacy |
CpweMeanderLine |
|
quantcore |
a, b |
yes |
legacy |
CpweTaper |
|
quantcore |
a, b |
yes |
legacy |
CpwSegment |
|
quantcore |
a, b |
yes |
legacy |
JtwpaChain |
|
quantcore |
a, b |
yes |
Series chain of |
KiTwpaSerpentine |
|
quantcore |
a, b |
yes |
Kinetic-inductance TWPA serpentine (twpa-sim |
Meander |
|
kqc |
a, b |
yes |
The PCell declaration for a meandering waveguide. |
WaveguideComposite |
|
kqc |
a, b |
yes |
A composite waveguide made of waveguides and other elements. |
WaveguideCoplanar |
|
kqc |
a, b |
yes |
The PCell declaration for an arbitrary coplanar waveguide. |
WaveguideCoplanarCurved |
|
kqc |
a, b |
yes |
origin at the arc centre: port ‘a’ at (r, 0), ‘b’ at angle alpha, both facing out along the tangent (registry.KQC_EXTRA_PORTS; KQC draws no ports). LOM: a CPW line of r·|alpha|. |
WaveguideCoplanarSplitter |
|
kqc |
a, b, c |
yes |
The PCell declaration of a multiway waveguide splitter. The number of ports is defined by the length of the |
WaveguideCoplanarStraight |
|
kqc |
(none) |
yes |
The PCell declaration of a straight segment of a coplanar waveguide. |
WaveguideCoplanarTaper |
|
kqc |
a, b |
yes |
The PCell declaration of a taper segment of a coplanar waveguide. |
PolylineCPW |
|
metal |
end, start |
yes |
A coplanar waveguide drawn along an explicit polyline. |
airbridge¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
AirbridgeConnection |
|
kqc |
a, b |
yes |
The PCell declaration of an Airbridge with tapered waveguides in both ends. |
AirbridgeMultiFace |
|
kqc |
a, b |
yes |
PCell declaration for a multi-face equivalent for an airbridge. |
AirbridgeRectangular |
|
kqc |
a, b |
yes |
PCell declaration for a rectangular airbridge. |
Airbridge |
|
metal |
a, b |
yes |
A single airbridge: two base-metal landing pads joined by an elevated |
marker¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
AlignmentMarkers |
|
quantcore |
(none) |
no |
legacy |
BoundaryBox |
|
quantcore |
(none) |
no |
legacy |
CornerMarker |
|
quantcore |
(none) |
no |
legacy |
CrossMarker |
|
quantcore |
(none) |
no |
legacy |
DicingMarker |
|
quantcore |
(none) |
no |
legacy |
EbeamMarker |
|
quantcore |
(none) |
no |
legacy |
GlobalMarker |
|
quantcore |
(none) |
no |
legacy |
WaferMap75 |
|
quantcore |
(none) |
no |
legacy |
ChipFrame |
|
kqc |
(none) |
no |
The PCell declaration for a chip frame. |
MarkerStandard |
|
kqc |
(none) |
no |
The PCell declaration for the Standard Marker. |
MaskMarkerFc |
|
kqc |
(none) |
no |
The PCell declaration for a MaskMarkerFc. |
test_structure¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
JunctionGroundPad |
|
quantcore |
(none) |
no |
legacy |
JunctionTestPads |
|
quantcore |
(none) |
no |
legacy |
ProbePadPair |
|
quantcore |
(none) |
no |
chip_11m’s commented-out probe pads (DC test structure, no ports, no circuit model): upper pad in 1/0, lower pad in the 3/0 second metal (qcc_keepout); junction_type ‘Trilayer Junction Compact’ puts the JX_500 junction in the cut-out. |
TaperedPad |
|
quantcore |
finger |
yes |
legacy |
AirbridgeDC |
|
kqc |
(none) |
no |
The PCell declaration for an airbridge test structure for four-point DC measurements. |
CrossTest |
|
kqc |
(none) |
no |
PCell declaration for optical lithography test alignment cross markers. |
JunctionTestPadsSimple |
|
kqc |
(none) |
no |
Junction test structures. |
StripesTest |
|
kqc |
(none) |
no |
PCell declaration for optical lithography test stripes. |
StripesTestIncreasingWidth |
|
kqc |
(none) |
no |
PCell declaration for optical lithography test stripes. |
TsvTestPattern |
|
kqc |
(none) |
no |
PCell declaration for TSV test structures which resembles a TSV fencing for a CPW transmission line. |
flip_chip¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
FlipChipConnectorDc |
|
kqc |
(none) |
no |
PCell declaration for an inter-chip dc connector. |
FlipChipConnectorRf |
|
kqc |
(none) |
no |
PCell declaration for an inter-chip rf connector. |
TsvStandard |
|
kqc |
(none) |
no |
Connector between faces of two sides of a substrate. |
shape¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
ArcPath |
|
quantcore |
(none) |
no |
legacy |
JJFingerBent |
|
quantcore |
(none) |
no |
legacy |
JJFingerStraight |
|
quantcore |
(none) |
no |
legacy |
SpiralPath |
|
quantcore |
(none) |
no |
legacy |
TextLabel |
|
quantcore |
(none) |
no |
Text etched into the ground (legacy chips 01–06: ``TextGenerator.default_generator().text(text, dbu, mag, |
CircleCaterpillar |
|
metal |
(none) |
no |
A single configurable circle. |
CircleRaster |
|
metal |
(none) |
no |
A single configurable circle. |
NGon |
|
metal |
(none) |
no |
A n-gon polygon. Eg. n = 3 : triangle, n = infinity : circle |
NSquareSpiral |
|
metal |
spiralPin |
yes |
draws metal only, no pocket (a metal spiral path; LOM on a pocket: an open line of the drawn length (rough)): alone it is empty in the negative mask, as in Metal’s own GDS (metal on the ground plane). Place it on a pocket, e.g. metal:Rectangle with subtract: true; its metal goes to base_metal_addition, which the fab export removes from the etch. Metal’s defaults are mm-scale. |
Rectangle |
|
metal |
(none) |
no |
A single configurable square. |
RectangleHollow |
|
metal |
(none) |
no |
A single configurable square. |
SmileyFace |
|
metal |
(none) |
no |
TEST COMPONENT It is for fun only. Can view a smiley face. Can make it |
other¶
name |
ref |
source |
ports |
LOM |
origin / notes |
|---|---|---|---|---|---|
FluxHoleArray |
|
quantcore |
(none) |
yes |
legacy |
FluxHoles |
|
quantcore |
(none) |
yes |
Square flux-trapping holes at explicit centres (legacy notebook 14 |
FluxlineStandard |
|
kqc |
flux |
yes |
Fluxline variant “standard”. |
FluxlineStraight |
|
kqc |
flux |
yes |
Fluxline variant “straight vertical”. |
Whole chips (reference cells, category chip)¶
name |
ref |
source |
description |
|---|---|---|---|
DesignChip |
|
quantcore |
Chip generated from a |
AirbridgeCrossings |
|
kqc |
The PCell declaration for an AirbridgeCrossings chip. |
AirbridgeDcTest |
|
kqc |
Chip full of airbridge 4-point dc tests. |
Chip |
|
kqc |
Base PCell declaration for chips. |
CrossingTwoface |
|
kqc |
The PCell declaration for a CrossingTwoFace chip. |
DaisyWoven |
|
kqc |
Base PCell declaration for a Daisy Woven chip. |
DcTest |
|
kqc |
Chip with launchers for DC sample holder. |
Demo |
|
kqc |
Demonstration chip with a four qubits, four readout resonators, two probe lines, charge- and fluxlines. |
DemoTwoface |
|
kqc |
Demonstration chip for 3D-integration (multi-face) features. |
Empty |
|
kqc |
Chip with almost all ground metal removed, used for EBL tests. |
JunctionTest |
|
kqc |
The PCell declaration for a JunctionTest chip. |
JunctionTest2 |
|
kqc |
The PCell declaration for a JunctionTest2 chip. |
Launchers |
|
kqc |
The PCell declaration for a chip with predefined launchers. |
LithographyTest |
|
kqc |
Optical lithography test chip. |
LithographyTestTwoface |
|
kqc |
Optical lithography test chip in a flip chip architecture. |
MunchQubits |
|
kqc |
Demonstration chip with two circular single island qubits, one floating island qubit, three readout resonators, |
QualityFactor |
|
kqc |
The PCell declaration for a QualityFactor chip. |
QualityFactorTwoface |
|
kqc |
The PCell declaration for a QualityFactorTwoFace chip. |
SampleHolderTest |
|
kqc |
The PCell declaration for a SampleHolderTest chip. |
Shaping |
|
kqc |
The PCell declaration for a Shaping chip. |
Simple |
|
kqc |
The PCell declaration for a very simple chip. |
SingleXmons |
|
kqc |
The PCell declaration for a SingleXmons chip. |
Stripes |
|
kqc |
The PCell declaration for a Stripes chip. |
TsvTest |
|
kqc |
Through silicon via test chip. |
XMonsDirectCoupling |
|
kqc |
The PCell declaration for an XMonsDirectCoupling chip. |
Metal routes (not cells)¶
name |
use instead |
|---|---|
RouteAnchors |
Metal route, not a cell: use a qcc route type “cpw” with the anchors as “nodes” |
RouteFramed |
Metal route, not a cell: use a qcc route type “cpw” with Manhattan “nodes” (the router adds the corners) |
RouteMeander |
Metal route, not a cell: use a qcc route type “meander” with “length” (total_length in µm) |
RouteMixed |
Metal route, not a cell: use a qcc route type “meander” with “length” and the anchors as “nodes” |
RoutePathfinder |
Metal route, not a cell: use a qcc route type “cpw” (the qcc router finds a Manhattan path; add “nodes” to steer it) |
RouteStraight |
Metal route, not a cell: use a qcc route type “cpw” between the two ports (no nodes) |