StripesTest

PCell declaration for optical lithography test stripes.

Source: KQC (KQCircuits). Category: test_structure. Module: kqcircuits.test_structures.stripes_test.

Warning

Legacy cell. = StripesTestIncreasingWidth with stripe_step 0 (XOR 0); unused. Use StripesTestIncreasingWidth

Note

Alias of StripesTestIncreasingWidth: the same circuit, drawn differently. stripe_step 0 (XOR 0); lithography test, no circuit

See also the catalog.

Pins

Pins of StripesTest

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

stripe_width

1

μm

Width of the stripes

stripe_length

100

μm

Length of the stripes

stripe_spacing

1

μm

Spacing between the stripes

num_stripes

20

–

Number of stripes

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "StripesTest", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components StripesTest lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.