WaveguideCoplanarStraight

The PCell declaration of a straight segment of a coplanar waveguide.

Source: KQC (KQCircuits). Category: waveguide. Module: kqcircuits.elements.waveguide_coplanar_straight.

See also the catalog.

Pins

Pins of WaveguideCoplanarStraight

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

ground_grid_in_trace

false

–

Add ground grid also to the waveguide

l

30

–

Length

add_metal

false

–

Add trace in base metal addition too

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

  • no lumped branches

  • X: bare KQC CPW segment without ports; no circuit elements

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "WaveguideCoplanarStraight", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components WaveguideCoplanarStraight lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.