TrilayerConcentricTransmon

Concentric transmon (KQC geometry) shunted by a Quantcore trilayer junction / SQUID.

Source: Quantcore. Category: qubit. Module: quantcore_circuits.layouts.qubits.trilayer_concentric.

See also the catalog.

Pins

Pins of TrilayerConcentricTransmon

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

pin

x (µm)

y (µm)

direction (°)

a (µm)

b (µm)

purpose

coupler_1

310.099

-112.867

340

10

6

coupler port (readout / bus); LOM node coupler_1

coupler_2

165

285.788

60

10

6

coupler port (readout / bus); LOM node coupler_2

coupler_3

-285.788

-165

210

10

6

coupler port (readout / bus); LOM node coupler_3

drive

200

-346.41

300

10

6

drive / charge line end; control line (drive) in the LOM

a, b: CPW centre width and gap where the pin declares them (– = not declared). Position and direction are in the cell’s own frame (at=(0, 0), rot=0).

Notes from the catalog: The Quantcore copy of KQC’s ConcentricTransmon (same islands, couplers, drive port, parameters, ports and LOM branches) with the PDK trilayer junction: junction_type defaults to ‘Quantcore Squid’ (fingers 2/0 + 4/0, spacer 50/0, gradient 51-53/0), sized by junction_params. KQC’s cell keeps its Manhattan SQUID as a choice (left unset, a design draws it as the Quantcore Squid).

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

mirror_squid

false

–

Mirror SQUID by its Y axis

junction_type

"Quantcore Squid"

–

Junction Type

junction_width

0.02

μm

Junction width for code generated element

outer_island_width

80

μm

Outer island radial width

ground_gap

80

μm

Ground plane padding

squid_angle

120

degrees

Angular position of the Josephson Junction/s, where the positive x-axis

couplers_r

290

[μm]

Radius of the couplers positioning

couplers_a

[10, 3, 4.5]

[μm]

Width of the coupler waveguide’s center conductors

couplers_b

[6, 32, 20]

[μm]

Width of the coupler waveguide’s gaps

couplers_angle

[340, 60, 210]

[degrees]

Positioning angles of the couplers, where 0deg corresponds to positive x-axis

couplers_width

[10, 20, 30]

[μm]

Radial widths of the arc couplers

couplers_arc_amplitude

[35, 45, 15]

[degrees]

Couplers angular extension

drive_angle

300

degrees

Angle of the drive port, where 0deg corresponds to positive x-axis

junction_params

"{}"

–

Junction cell parameters (JSON dict)

loop_area

100

μm^2

Loop area

fluxline_type

"Fluxline Standard"

–

Fluxline Type

r_inner

120

μm

Internal island radius

r_outer

250

μm

External island radius, measured at the outer edge

drive_distance

400

µm

Distance of the driveline, measured from qubit centre

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

The cell contributes to the lumped model:

branch

type

nodes

value (estimate at defaults)

C_X_1

C

island1 – gnd

estimate=122, unit=fF, estimate_source=analytic: ring outer edge as half CPW, estimate_kind=analytic, uncertainty=±25%

C_X_12

C

island1 – island2

estimate=91, unit=fF, estimate_source=rough: disk–ring facing edges as coplanar strips along the mean circumference, estimate_kind=rough, uncertainty=±50%

C_X_2

C

island2 – gnd

estimate=19, unit=fF, estimate_source=rough: disk to ground screened by the ring, estimate_kind=rough, uncertainty=±50%

J_X

SQUID

island1 – island2

Lj_nH=6.734, Cj_fF=15, asym=0, flux_phi0=0

Cg_X_coupler_1

C

island1 – coupler_1

estimate=12, unit=fF, estimate_source=rough: arc 177 µm facing the island across 35 µm (CPS), estimate_kind=rough, uncertainty=±50%

Cc_X_coupler_1

C

coupler_1 – gnd

estimate=13, unit=fF, estimate_source=rough: arc outer edge (half CPW) + port lead, estimate_kind=rough, uncertainty=±50%

Cg_X_coupler_2

C

island1 – coupler_2

estimate=19, unit=fF, estimate_source=rough: arc 228 µm facing the island across 30 µm (CPS), estimate_kind=rough, uncertainty=±50%

Cc_X_coupler_2

C

coupler_2 – gnd

estimate=15, unit=fF, estimate_source=rough: arc outer edge (half CPW) + port lead, estimate_kind=rough, uncertainty=±50%

Cg_X_coupler_3

C

island1 – coupler_3

estimate=7, unit=fF, estimate_source=rough: arc 76 µm facing the island across 25 µm (CPS), estimate_kind=rough, uncertainty=±50%

Cc_X_coupler_3

C

coupler_3 – gnd

estimate=7.2, unit=fF, estimate_source=rough: arc outer edge (half CPW) + port lead, estimate_kind=rough, uncertainty=±50%

Nodes: island1, island2, coupler_1, coupler_2, coupler_3.

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "TrilayerConcentricTransmon", at=(3750, 3750), a=10)   # parameters: see the table above
d.add("PAD", "BondPad", at=(1125, 3750), rot=270)   # a launcher to connect to
d.route("L1", "PAD.a", "U1.coupler_1")                # a CPW from the pad to the pin

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components TrilayerConcentricTransmon lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status: not listed in kplugin/COMPONENTS_STATUS.md.