Amplifier designs¶
Six parametric amplifier chips: two travelling-wave amplifiers (Josephson and kinetic-inductance), three JPAs and a kinetic-inductance amplifier from UNSW. They come from the QPDK and twpa-sim projects (MIT) and from a UNSW dataset (CC BY 4.0), rebuilt on the Quantcore PDK. All six are built in the same six steps (die, pads, feed, nonlinear element, routing, whole chip). They hold no qubits, so their LOM section reports amplifier figures where the notebook’s model gives them.
Page |
What it is |
Qubits |
Chip size |
Builds |
|---|---|---|---|---|
4WM travelling-wave amplifier, 64-junction chain |
0 |
7.5 × 7.5 mm |
yes |
|
16-row serpentine travelling-wave amplifier |
0 |
7.5 × 7.5 mm |
yes |
|
λ/4 resonator ending in a SQUID, with pump line |
0 |
7.5 × 7.5 mm |
yes |
|
capacitively and inductively coupled lumped JPAs |
0 |
7.5 × 7.5 mm |
yes |
|
lumped SQUID JPA with coupling capacitor and flux line |
0 |
7.5 × 7.5 mm |
yes |
|
kinetic-inductance amplifier with a stepped-impedance filter |
0 |
4 × 11 mm |
yes |