GlobalMarker¶
Global alignment marker: six squares in two columns (legacy draw.global_marker).
Source: Quantcore. Category: marker. Module: quantcore_circuits.layouts.others.markers.
See also the catalog.
Pins¶

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.
No pins: this cell has no ports. Place it with at= / rot=.
Parameters¶
name |
default |
unit |
description |
|---|---|---|---|
|
|
μm |
Width of center conductor |
|
|
μm |
Width of gap |
|
|
μm |
Turn radius |
|
|
μm |
Square size |
|
|
– |
Layer: qcc name (marker_0..3, chip_boundary, …) or KQC name (base_metal_gap_wo_grid = legacy etch) |
|
|
μm |
Column offset from the centre |
|
|
μm |
Row pitch |
Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.
LOM model¶
none (a LOM build gives each pin its own bare node, without elements).
How to use¶
In Python:
from quantcore_circuits.designer import Designer
d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "GlobalMarker", at=(3750, 3750), a=10) # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=
Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components GlobalMarker lists the pins; add --schema for the parameters.
In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.
GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.