JJFingerStraight¶
Straight junction finger (legacy “JJ_finger Top”), on SIS_junction (2/0).
Source: Quantcore. Category: shape. Module: quantcore_circuits.layouts.junctions.jj_fingers.
See also the catalog.
Pins¶

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.
No pins: this cell has no ports. Place it with at= / rot=.
Parameters¶
name |
default |
unit |
description |
|---|---|---|---|
|
|
μm |
Width of center conductor |
|
|
μm |
Width of gap |
|
|
μm |
Turn radius |
|
|
μm |
Finger width (legacy finger_width) |
|
|
μm |
Pad height (legacy pad_height) |
|
|
μm |
Pad width (legacy pad_width) |
|
|
μm |
Finger length (legacy finger_length) |
|
|
μm |
Window width (legacy width) |
|
|
– |
Negative: window minus finger (legacy negative / Fab) |
|
|
– |
Flip (legacy invert) |
|
|
μm |
Finger offset in x (legacy x) |
|
|
μm |
Window height (legacy height) |
|
|
μm |
Finger offset in y (legacy y) |
Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.
LOM model¶
none (a LOM build gives each pin its own bare node, without elements).
How to use¶
In Python:
from quantcore_circuits.designer import Designer
d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "JJFingerStraight", at=(3750, 3750), a=10) # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=
Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components JJFingerStraight lists the pins; add --schema for the parameters.
In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.
GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.