Component reference

145 cells from the Quantcore, KQC and Metal libraries (chips and wafers are not listed). Each page shows the pins first, then the parameters, the LOM model and how to place the cell. See also the catalog.

What a pin is

A pin (port) is a named connection point of a cell. It has:

  • a name, such as claw_n or a; a route refers to it as INSTANCE.pin;

  • a position (x, y in µm) in the cell’s own frame;

  • a direction in degrees, pointing out of the cell (0 = +x, 90 = +y). A route leaves along it. Some pins have no direction (a junction lead or a pad centre): they mark a point and cannot be snapped to;

  • the CPW geometry it expects: centre width a and gap b (µm). A route that connects takes a and b from its start pin.

Connect (in KLayout, or d.route(...) / snap= in Python) joins two pins. Their directions must face each other, and a and b should match; the DRC warns otherwise. A pin that nothing connects to stays as drawn: the cell’s own note on its page says where that matters (an open end with a gap capacitor, for instance).

Qubit

cell

source

pins

image

description

Flipmon

Quantcore

3

Circular flip-chip transmon (QPDK flipmon_with_bbox), optionally with its plate readout coupler.

Gatemon

Quantcore

4

Carbon-nanotube gatemon island in an etched pocket with a gate feed (QPDK gatemon), M1 only.

TransmonTaperedInsets

Quantcore

8

Floating tapered-pad transmon in a filleted pocket (SQDMetal TransmonTaperedInsets).

TrilayerConcentricTransmon

Quantcore

4

Concentric transmon (KQC geometry) shunted by a Quantcore trilayer junction / SQUID.

TwoPadTransmon

Quantcore

4

Floating two-pad transmon (legacy Transmon); ports left / right at the lead ends.

Xmon

Quantcore

1

Grounded cross transmon with claw couplers; junction below the south arm.

CircularTransmonSingleIsland

KQC

4

The PCell declaration for a single island circular transmon.

ConcentricTransmon

KQC

4

The PCell declaration for a concentric transmon.

DoublePads

KQC

2

A two-island qubit, consisting of two rounded rectangles shunted by a junction, with one capacitive coupler.

DoublePadsSplines (legacy)

KQC

2

A two-island qubit, consisting of two spline-constructed islands shunted by a junction,

Swissmon

KQC

5

The PCell declaration for a Swissmon qubit.

metal:StarQubit

Metal

7

A single configurable circle with multiple pads.

metal:TransmonConcentric

Metal

5

The base TrasmonConcentric class .

metal:TransmonConcentricType2

Metal

5

TransmonConcentricType2.png

metal:TransmonCross

Metal

2

The base TransmonCross class.

metal:TransmonCrossFL

Metal

3

The base TransmonCrossFL class.

metal:TransmonInterdigitated

Metal

5

The base “TransmonInterdigitated” inherits the “QComponent” class.

metal:TransmonPocket

Metal

2

The base TransmonPocket class.

metal:TransmonPocket6

Metal

2

Transmon pocket with 6 connection pads.

metal:TransmonPocketCL

Metal

3

The base TransmonPocketCL class.

metal:TransmonPocketTeeth

Metal

2

Transmon pocket with ‘Teeth’ connection pads.

metal:TransmonStar

Metal

2

The base TransmonStar class.

Junction

cell

source

pins

image

description

QuantcoreJunction

Quantcore

1

The Quantcore PDK junction (junction_type: "Quantcore Junction" in any KQC / Quantcore qubit): a

QuantcoreSquid

Quantcore

1

The Quantcore PDK SQUID (junction_type: "Quantcore Squid"): a symmetric TrilayerSquid whose whole SQUID

SquidV0 (legacy)

Quantcore

1

Pre-HSQ SQUID (legacy junction_creator_sq.create_junction_squid; junction_pad.py with

TrilayerJunction

Quantcore

1

Single Nb trilayer cross junction (legacy xjc_junction_TL_mod.create_junction).

TrilayerJunctionCompact

Quantcore

1

Compact single trilayer junction for dense junction test arrays (legacy chip_11m_TestJJ16x_pads.py

TrilayerJunctionHSQ

Quantcore

1

Single trilayer junction, first HSQ generation (legacy junction_creator_HSQ.create_junction).

TrilayerSquid

Quantcore

1

Two trilayer junctions forming a SQUID (legacy xjc_squid_TL_mod.create_squid).

TrilayerSquidHSQ

Quantcore

1

Two trilayer junctions forming a SQUID, first HSQ generation (legacy squid_creator_HSQ.create_squid).

Manhattan

KQC

1

The PCell declaration for a Manhattan style SQUID.

ManhattanSingleJunction (legacy)

KQC

1

The PCell declaration for a Manhattan style single junction.

NoSquid

KQC

1

The PCell declaration for a No SQUID junction.

Sim

KQC

3

The PCell declaration for a simulation type SQUID.

SuperInductor

KQC

1

The PCell declaration for a Manhattan style single junction.

metal:BridgeFreeJunction (legacy)

Metal

0

user_bridgefreejj.png

metal:jj_dolan

Metal

0

Dolan-bridge Josephson junction.

metal:jj_manhattan

Metal

0

Manhattan-style Josephson junction.

metal:SNAIL

Metal

4

A SNAIL (Superconducting Nonlinear Asymmetric Inductive eLement).

metal:SQUID_LOOP (legacy)

Metal

0

The base “SQUID_LOOP” inherits the “QComponent” class.

Coupler

cell

source

pins

image

description

GatemonCoupler

Quantcore

3

Straight CPW o1 → o2 with a capacitive island reference port qubit (QPDK gatemon_coupler).

HyperbolicVertexCoupler

Quantcore

3

q-pin capacitive disk coupler at a hyperbolic-lattice vertex (QPDK hyperbolic_vertex_coupler).

PadCoupler

Quantcore

2

Series gap capacitor of two facing pads (legacy Coupler); ports left / right.

CapacitiveXCoupler (legacy)

KQC

4

Capacitive coupler for testing FEM computations.

metal:CapNInterdigitalTee

Metal

3

Generates a three pin (+) structure comprised of a primary two pin CPW

metal:CoupledLineTee

Metal

3

Generates a three pin (+) structure comprised of a primary two pin CPW

metal:LineTee

Metal

3

Generates a three pin (+) structure comprised of a primary two pin CPW

metal:TunableCoupler01

Metal

4

One of the tunable couplers Based off the implementation in

metal:TunableCoupler02

Metal

5

TunableCoupler02.png

Capacitor

cell

source

pins

image

description

CpweFingerCapacitor

Quantcore

2

Interdigital capacitor interrupting the centre line (legacy cpwe.finger_cap); ports a (−x), b.

CpweFingerLine

Quantcore

2

CPW with interdigital fingers between centre line and ground on both sides (legacy cpwe.finger_line);

CpweGapCapacitor

Quantcore

2

Gap in the centre line (legacy cpwe.gap_cap); ports a (−x), b (+x).

SmoothCapacitorSemicircle

Quantcore

2

Coupling pad with a semicircular bite, placed on a qubit pin (SQDMetal Smooth_Capacitor_Semicircle).

CircularCapacitor

KQC

2

The PCell declaration for a circular capacitor.

FingerCapacitorSquare

KQC

2

The PCell declaration for a square finger capacitor.

FingerCapacitorTaper

KQC

2

The PCell declaration for a tapered finger capacitor.

SmoothCapacitor

KQC

2

The PCell declaration for a smooth finger capacitor.

SpiralCapacitor

KQC

2

The PCell declaration for a spiral capacitor.

metal:Cap3Interdigital

Metal

2

Create a three finger planar capacitor with a ground pocket cuttout.

metal:CapFingerInFrame

Metal

2

Two-pin gap capacitor with one electrode framing the other.

metal:CapNInterdigital

Metal

2

Generates a two pin (+) structure comprised of a north CPW transmission

Resonator

cell

source

pins

image

description

CoupledResonator

Quantcore

1

λ/4 meander resonator with a straight coupler section on y = 0 (legacy Coupled Resonator); port end.

CpweQuarterWaveResonator

Quantcore

0

λ/4 resonator capacitively coupled through an open-ended arm parallel to the feedline (legacy

CpwResonator

Quantcore

2

Meandered CPW resonator grounded at both ends (legacy CPW Resonator); ports start and end.

LumpedJpa

Quantcore

3

Lumped JPA: a trilayer junction or SQUID to ground, shunted by an interdigital capacitor (twpa-sim jpa /

QubitResonator

Quantcore

1

λ/4 readout resonator with a coupler section and a mandatory tail to a qubit (legacy Qubit Resonator).

SpiralLine

Quantcore

2

Spiral line by angle (legacy draw.spiral): Archimedean, Fermat or double Fermat; ports a / b.

HangerResonator

KQC

4

Hanger Resonator

QuarterWaveCpwResonator

KQC

3

CPW Resonator

SpiralResonatorPolygon

KQC

2

The PCell declaration for a polygon shaped spiral resonator.

metal:ReadoutResFC

Metal

1

ReadoutResFC.png

metal:ResonatorCoilRect

Metal

1

A rectangle spiral resonator based on length input. The X dimension is

metal:ResonatorLumped

Metal

8

ResonatorLumped.png

Launcher

cell

source

pins

image

description

BondPad

Quantcore

1

Wire-bond pad tapering to a CPW (a/b); port a at the taper tip.

ConnectorPad

Quantcore

1

Wire-bond pad tapering to a CPW (legacy “Connector Pad”, v1); port a at the taper tip.

CpweBondPad

Quantcore

1

Bond pad: open end tl, wide line bl (pad_width/pad_gap), taper btl to the CPW a/b

Launcher

KQC

1

The PCell declaration for a launcher for connecting wirebonds.

LauncherDC

KQC

1

The PCell declaration for a DC launcher for connecting wirebonds.

metal:LaunchpadWirebond

Metal

1

Launch pad to feed/read signals to/from the chip.

metal:LaunchpadWirebondCoupled

Metal

1

Launch pad to feed/read signals to/from the chip.

metal:LaunchpadWirebondDriven

Metal

2

Launch pad to feed/read signals to/from the chip.

Termination

cell

source

pins

image

description

CpweOpenEnd

Quantcore

1

Open CPW termination (legacy cpwe.term_open): the gap box of length; port a at the origin (−x).

NeckTermination

Quantcore

1

Shorted CPW end through a taper and a narrow neck in an etched window (QPDK neck_termination).

SquidTermination

Quantcore

4

CPW lead shorted to ground through a trilayer SQUID, with a shorted pump / flux line (QPDK squid_termination

metal:OpenToGround

Metal

1

A sample_shapes open to ground termination. Functions as a pin for auto drawing.

metal:ShortToGround

Metal

1

ShortToGround.png

Waveguide

cell

source

pins

image

description

CoupledConnector

Quantcore

2

Meandered CPW connector from the origin downwards (legacy Coupled Connector); ports start, end.

CpweMeanderLine

Quantcore

2

Meandered CPW (legacy cpwe.meander_line; with lead > 0 it is legacy cpwe.quarter_wave: lead,

CpweTaper

Quantcore

2

Taper from a/b to a_end/b_end (legacy cpwe.tapper: linear or exponential profiles).

CpwSegment

Quantcore

2

Straight CPW segment centred at the origin (legacy “Coplanar Waveguide”); ports a (−x) and b (+x).

JtwpaChain

Quantcore

2

Series chain of cells trilayer junctions along +x (4WM JTWPA; twpa-sim jtwpa4wm; QPDK resonantly

KiTwpaSerpentine

Quantcore

2

Kinetic-inductance TWPA serpentine (twpa-sim KITLayout / kit.primitives, the NY CREATES research

Meander

KQC

2

The PCell declaration for a meandering waveguide.

WaveguideComposite

KQC

2

A composite waveguide made of waveguides and other elements.

WaveguideCoplanar

KQC

2

The PCell declaration for an arbitrary coplanar waveguide.

WaveguideCoplanarCurved (legacy)

KQC

2

The PCell declaration of a curved segment of a coplanar waveguide.

WaveguideCoplanarSplitter

KQC

3

The PCell declaration of a multiway waveguide splitter. The number of ports is defined by the length of the

WaveguideCoplanarStraight

KQC

0

The PCell declaration of a straight segment of a coplanar waveguide.

WaveguideCoplanarTaper

KQC

2

The PCell declaration of a taper segment of a coplanar waveguide.

metal:PolylineCPW

Metal

2

A coplanar waveguide drawn along an explicit polyline.

Airbridge

cell

source

pins

image

description

AirbridgeConnection

KQC

2

The PCell declaration of an Airbridge with tapered waveguides in both ends.

AirbridgeMultiFace

KQC

2

PCell declaration for a multi-face equivalent for an airbridge.

AirbridgeRectangular

KQC

2

PCell declaration for a rectangular airbridge.

metal:Airbridge (legacy)

Metal

2

A single airbridge: two base-metal landing pads joined by an elevated

Marker

cell

source

pins

image

description

AlignmentMarkers

Quantcore

0

E-beam alignment squares at the four chip corners (legacy draw.marker_align); origin = chip lower-left.

BoundaryBox

Quantcore

0

Chip boundary square with corner crosses (legacy BoundBox, layer 9/0 → qcc chip_boundary).

CornerMarker

Quantcore

0

L-shaped chip-corner alignment marker (legacy Marker); hsq=True draws the HSQ variant.

CrossMarker

Quantcore

0

Small alignment cross (legacy draw.marker, used beside the cpwe bond pads).

DicingMarker

Quantcore

0

Dicing cross (legacy draw.marker_dicing).

EbeamMarker

Quantcore

0

E-beam marker: four metal squares in an etched window (legacy die_creator).

GlobalMarker

Quantcore

0

Global alignment marker: six squares in two columns (legacy draw.global_marker).

ChipFrame

KQC

0

The PCell declaration for a chip frame.

MarkerStandard

KQC

0

The PCell declaration for the Standard Marker.

MaskMarkerFc

KQC

0

The PCell declaration for a MaskMarkerFc.

Test structure

cell

source

pins

image

description

JunctionGroundPad

Quantcore

0

Rounded probe pad joined to ground by a bridge carrying a trilayer junction (legacy testPad.py).

JunctionTestPads

Quantcore

0

Two probe pads with a trilayer junction between their tips (legacy testPad_* / xtp_testpads).

ProbePadPair

Quantcore

0

Probe-pad pair of the chip_11m junction test array (legacy chip_11m_TestJJ16x_pads.create_testPad, whose

TaperedPad

Quantcore

1

Probe pad tapering to a junction finger (legacy “Pad”); port finger at the taper tip.

AirbridgeDC

KQC

0

The PCell declaration for an airbridge test structure for four-point DC measurements.

CrossTest

KQC

0

PCell declaration for optical lithography test alignment cross markers.

JunctionTestPadsSimple

KQC

0

Junction test structures.

StripesTest (legacy)

KQC

0

PCell declaration for optical lithography test stripes.

StripesTestIncreasingWidth

KQC

0

PCell declaration for optical lithography test stripes.

TsvTestPattern

KQC

0

PCell declaration for TSV test structures which resembles a TSV fencing for a CPW transmission line.

Flip chip

cell

source

pins

image

description

CpwTsvTransition

Quantcore

2

CPW transition through one chip: a pad on each face, joined by signal TSVs, with ground TSVs around them.

QcFlipChipConnectorRf

Quantcore

2

KQC’s flip-chip bump transition (FlipChipConnectorRf) with a bump size and named ports a and b.

FlipChipConnectorDc

KQC

0

PCell declaration for an inter-chip dc connector.

FlipChipConnectorRf

KQC

2

PCell declaration for an inter-chip rf connector.

TsvStandard

KQC

0

Connector between faces of two sides of a substrate.

Shape

cell

source

pins

image

description

ArcPath

Quantcore

0

Circular arc path starting at the origin (legacy “Arc”): length ≥ arc_length → half circle of that

JJFingerBent

Quantcore

0

Bent junction finger with its holder (legacy “JJ_finger Bottom”), on SIS_junction_2 (4/0).

JJFingerStraight

Quantcore

0

Straight junction finger (legacy “JJ_finger Top”), on SIS_junction (2/0).

SpiralPath (legacy)

Quantcore

0

Archimedean spiral path from inner_r to outer_r (legacy “Spiral”).

TextLabel

Quantcore

0

Text etched into the ground (legacy chips 01–06: ``TextGenerator.default_generator().text(text, dbu, mag,

metal:CircleCaterpillar

Metal

0

A single configurable circle.

metal:CircleRaster

Metal

0

A single configurable circle.

metal:NGon

Metal

0

A n-gon polygon. Eg. n = 3 : triangle, n = infinity : circle

metal:NSquareSpiral (legacy)

Metal

1

A n count square spiral.

metal:Rectangle

Metal

0

A single configurable square.

metal:RectangleHollow

Metal

0

A single configurable square.

metal:SmileyFace

Metal

0

TEST COMPONENT It is for fun only. Can view a smiley face. Can make it

Other

cell

source

pins

image

description

FluxHoleArray

Quantcore

0

Array of square flux-trapping holes in the ground plane (legacy chips’ flux_holes).

FluxHoles

Quantcore

0

Square flux-trapping holes at explicit centres (legacy notebook 14 FluxHoles QComponent, size 5 µm).

FluxlineStandard

KQC

1

Fluxline variant “standard”.

FluxlineStraight

KQC

1

Fluxline variant “straight vertical”.