Fab export¶
The fab export turns a built design into the mask file the fab expects: only the PDK’s fab layers, with the layer polarity, the cheese, the 3/0 keep-outs and rounded corners. Use it when a design is final. It writes one OAS file (and, from the plugin, a bundle). The layer map and the rules are on the PDK page.
layouts/wafers/fab_export.export_fab(result, out, polarity, report=, cheese=, rounding=) writes the mask and fills
report with the layers it dropped.
Route |
How |
|---|---|
Python |
|
CLI |
|
Plugin |
Quantcore > Fab > Export for fab: a bundle with |
The cheese is the build’s own; if the design has none, the PDK band is used (also on 3/0). Simulation exports never get cheese or rounding. Either way the holes stay in the ground plane (not in floating pads or islands), and no hole lands on or next to a TSV, an indium bump, under-bump metal or an airbridge; these are not written on 3/0.
On 3/0, a whole KQC chip placed as one instance (for example Stripes, JunctionTest or Empty in
examples/designs/kqc/test_chips) gets its etch grown by the 9 µm margin. A keep-out of its bounding box would cover
nearly the whole die and leave the cheese only a thin band at the die edge. The same holds for any cell over more than
half the die.
report = {}
fab = export_fab(T.built(d), "build/t00_quickstart_fab.oas", report=report)
T.md(T.fab_report_md(report, fab)) # which layers were written, which dropped
The fab mask of the tutorial 4 chip (headless render of build/t04_two_qubit_user_fab.oas): two pads, feedline, two
readouts and qubits, device ID QS2, frame marks at the corners. Pink and blue hatching are different layers; the dots
are the cheese band.¶
Close-up of a qubit in the fab file: etch, 3/0 keep-out and cheese.¶
The facing arm tips of the two Xmons (tutorial 4): rounded corners and the cheese band between them.¶
Limits¶
105 example exports were compared after the latest 3/0 and cheese changes.
Wafer assembly (dies on a wafer) is in Wafer assembly; a mask set (several chips with test structures and per-layer reticles) is not built.
The dashboard has no Fab step.