CornerMarker

L-shaped chip-corner alignment marker (legacy Marker); hsq=True draws the HSQ variant.

Source: Quantcore. Category: marker. Module: quantcore_circuits.layouts.others.markers.

See also the catalog.

Pins

Pins of CornerMarker

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

width

500

μm

Marker size (full cross width; each arm is width / 2 long)

marker_layer

"marker_1"

–

Layer: qcc name (marker_0..3, chip_boundary, …) or KQC name (base_metal_gap_wo_grid = legacy etch)

thickness

50

μm

Arm thickness

hsq

false

–

HSQ marker (qcc hsq + hsq_boundary layers instead of the base-metal etch)

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "CornerMarker", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components CornerMarker lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.