JunctionGroundPad

Rounded probe pad joined to ground by a bridge carrying a trilayer junction (legacy testPad.py).

Source: Quantcore. Category: test_structure. Module: quantcore_circuits.layouts.others.test_pads.

See also the catalog.

Pins

Pins of JunctionGroundPad

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

box_size

500

μm

Etch window size

pad_size

400

μm

Pad size

pad_r_inner

40

μm

Pad inner corner radius

pad_r_outer

20

μm

Pad outer corner radius

bridge_width

50

μm

Width of the bridge to ground

junction_y

-225

μm

Junction position on the bridge (y)

finger_width

0.26

μm

Straight finger width (legacy 0.2·size + 0.06)

second_finger_width

0.2

μm

Bent finger width

corner_points

64

–

Points per full circle of the pad corners

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "JunctionGroundPad", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components JunctionGroundPad lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.