ProbePadPair

Probe-pad pair of the chip_11m junction test array (legacy chip_11m_TestJJ16x_pads.create_testPad, whose

Source: Quantcore. Category: test_structure. Module: quantcore_circuits.layouts.others.test_pads.

See also the catalog.

Pins

Pins of ProbePadPair

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Notes from the catalog: chip_11m’s commented-out probe pads (DC test structure, no ports, no circuit model): upper pad in 1/0, lower pad in the 3/0 second metal (qcc_keepout); junction_type ‘Trilayer Junction Compact’ puts the JX_500 junction in the cut-out.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

pad_width

500

μm

Pad width

upper_pad_height

400

μm

Upper (base-metal) pad height

lower_pad_height

400

μm

Lower (second-metal) pad height

pad_trim

50

μm

Pads shortened by (towards the window edge)

junction_type

"No Squid"

–

Junction in the cut-out: none (legacy) or a trilayer cell

junction_params

"{}"

–

Junction cell parameters (JSON dict)

middle_height

200

μm

Distance between the pads (junction region)

window_extra

100

μm

Window wider than the pads by

cutout

11

μm

Centre cut-out (junction site) size

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "ProbePadPair", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components ProbePadPair lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.