quantcore_circuits.layouts.others.spirals¶
Spiral lines ported from the QWri drawing library components/python/draw.py::spiral (kinetic-inductance /
TWPA spiral inductors; request #7).
The legacy function draws a pya.Path of width w through npoints points of a spiral given by angle,
φ = linspace(start_ang, end_ang, npoints):
archimedean(legacy type 0): r = spiral_r · φ;fermat(type 1): r = √(spiral_r² · φ) = spiral_r · √φ;double_fermat(type 2, “double Fermat in/out”): the Fermat arm and its point reflection (−x, −y) joined at the centre, so both ends lie outside — a two-terminal spiral inductor. The legacy code has a typo here (it computesy_blsand then uses an undefinedy1s, so type 2 raisesNameError); the port implements the evident intent (y1s = r sin φ), which the golden test checks against the legacy function with that one name fixed.
Coordinates are the legacy ones (same numpy and pya calls, so the geometry XORs clean), with spiral_r and
width in µm (legacy: database units) and the angles in radians. The path is metal on base_metal_addition
(metal, default) — place it on a pocket (e.g. metal:Rectangle with subtract: true, or pocket_margin)
— or etched on base_metal_gap_wo_grid (metal=False, where the legacy chips draw 1/0).
Ports a (path start) and b (path end), facing outward along the path tangent (not Manhattan in general),
a = width, b = the element b. pocket_margin > 0 etches a square pocket that far beyond the spiral’s
bounding box; the ports stay at the path ends inside it. LOM: one conductor a → b, a line of the drawn
centre-line length (SpiralLine.qcc_length()) with the mean turn spacing as its gap
(SpiralLine.qcc_turn_gap(); quantcore_circuits.lom.quantcore_models).
Attributes¶
Classes¶
Spiral line by angle (legacy |
Functions¶
|
Legacy |
Module Contents¶
- class quantcore_circuits.layouts.others.spirals.SpiralLine¶
Bases:
kqcircuits.elements.element.ElementSpiral line by angle (legacy
draw.spiral): Archimedean, Fermat or double Fermat; portsa/b.- build()¶
- classmethod qcc_length(params: dict) float¶
Drawn centre-line length (µm).
- classmethod qcc_points(params: dict, dbu: float = 0.001) list¶
- classmethod qcc_port_widths(params: dict) dict¶
Ports: a = the line
width, b = the elementb(a route continues as a CPW of that gap).
- classmethod qcc_turn_gap(params: dict) float¶
Mean spacing between neighbouring turns (µm): radial span / turns − width (double Fermat: the two arms interleave, half that pitch).
- end_angle¶
- metal¶
- pocket_margin¶
- points¶
- qcc_category = 'resonator'¶
- spiral_r¶
- spiral_type¶
- start_angle¶
- width¶
- quantcore_circuits.layouts.others.spirals.draw_spiral_points(dbu, start_angle, end_angle, spiral_r, spiral_type, npoints) list¶
Legacy
draw.spiralcentre line (spiral_rin µm, angles in rad), points in dbu (pya.Point).
- quantcore_circuits.layouts.others.spirals.SPIRAL_TYPES¶