SpiralPath

Archimedean spiral path from inner_r to outer_r (legacy “Spiral”).

Source: Quantcore. Category: shape. Module: quantcore_circuits.layouts.others.shapes.

Warning

Legacy cell. legacy spiral.lym: the archimedean curve of SpiralLine (XOR 2.4 of 155 µm²) without ports or LOM model; golden test only. New designs: SpiralLine

See also the catalog.

Pins

Pins of SpiralPath

Pin image (default parameters). Light = metal, dark = etched gap, colours = junction layers. A red dot and arrow is a pin and its direction (out of the cell); the red bar is the CPW width a + 2 b. Blue dot = a pin without direction. Units: µm.

No pins: this cell has no ports. Place it with at= / rot=.

Parameters

name

default

unit

description

a

10

μm

Width of center conductor

b

6

μm

Width of gap

r

100

μm

Turn radius

width

1

μm

Path width

spacing

1

μm

Spacing between turns

turn_points

64

–

Points per turn

metal

false

–

Draw as metal (base_metal_addition) instead of etched

inner_r

1

μm

Inner radius

outer_r

10

μm

Outer radius

Electrically relevant parameters (sizes, gaps, junction, ports) come first, the rest follows.

LOM model

none (a LOM build gives each pin its own bare node, without elements).

How to use

In Python:

from quantcore_circuits.designer import Designer

d = Designer("demo", box=(0, 0, 7500, 7500))
d.add("U1", "SpiralPath", at=(3750, 3750), a=10)   # parameters: see the table above
# no directed pin: place it with at= / rot=, or snap it with snap= / to=

Pin names go into d.route(...) as INSTANCE.pin, and into snap= / to= when placing. From the shell: qcc components SpiralPath lists the pins; add --schema for the parameters.

In KLayout: Quantcore panel ▸ Components ▸ double-click the cell, then click on the layout to place it. Rotate and mirror before the click; use Connect on two pins to route.

GUI status (kplugin/COMPONENTS_STATUS.md): places ok, edit ok, connect n/a (no directed port), build ok. no ports.